Everybody asking where to buy his products. 90 % of this excelent work is not the products. but his craftsmanship. This guy is a REAL artist. Thanks for the video!
As a new dentist i use cosmedent. It has changed my work. The material is awesome. Results were shocking. V v expensive. But worth it. It has put in so much confidence
This is excellent information as I have always felt that my smile makeovers did not finish off in the way I initially projected as I end up seeing voids on the facial aspect. Now that I see where I was actually incorrectly adapting the composite material , im so anxious to test this method on my case that im engaging in the next few hours
Excellent work, it is really amazing to see a true talent and when you can do the work with passion. That is what i aspire to be, My question is would you recommend any other composites with similar properties 3M ESPE Z500 ? or CERAM X Duo ? as i cannot find the composite you used in UK. Many thanks and keep up the FANTASTIC work!
Hi, congratulations on your wonderful work! How can get the products and instruments you have used in this case, here in the UK. Thank you very much again for sharing your work with us.
Hi...brilliant work. What is the name of the "flat spoon end instrument/spatula" that you used for initial placement of the composite ball on the tooth.
Quero comprar o opacificador apresentado no videio mas não o encontro como posso e com quem adquirir por gentileza?...tenho urgencia...moro em goiania .GO BRASIL
dear fahl,two quieries,what the rpm speed for finishing discs,and should we use glecrin gel prior to full polymerisation?usually compo.stains over time esp at margins how to avoid? thank u for beautiful presentation
Can you please comment on the endurance of this veneer compared to ceramic either lab or office milled. Also if lengthening the incisal edge is needed so the veneer must entirely serve for edge strength regarding using resin. Thank you.
Hi Dr. Gopaul, are are happy to hear you like this video! Here are a couple more that you might find helpful: www.cosmedent.com/videos/diastema-closure-perfection/ and www.cosmedent.com/resources/restorative_techniques_diastema_closure/ Let us know if you have any further questions.
hello! i've already searched in almore website for that composite spatulas, and apparently looks like the same but its not completely gold! and it looksthiner. is that the only one, or theres a special one for Dr.Newton fahl? please answer me, greetings
Dr. Advani, you can use glycerin or oxalate gel prior to final finishing. The speed for the fishing disc is RPM 15,000. Feel free to contact Cosmedent at 800-621-6729 if you have any additional questions.
Great!! What is the first instrument (apparently golden spatula) you use to model composite? (Approx. in minute 6). I've got all the cosmedent anterior and posterior placement instruments, but not that one, I can't find it!! Thanks!!
Thanks for your nice comment, Dr. Roxy Wall. The name of the company that sells Cosmedent products in the UK is Enlighten Smiles Limited. You might contact them by calling +44 (0) 207 424 3270. Thanks, again.
great work, but you didnt say anything about most important piece of your work. How to get rid and make it right in the aproximal area. You can clearly see theres a lot of junk out there between the teeth.
Thanks for your nice comment vasso215. Our distributor in Greece is Maurice Faraggi S.A.- Phone: +30 2107489031. You can also access our website to see more information.
Everybody asking where to buy his products. 90 % of this excelent work is not the products. but his craftsmanship. This guy is a REAL artist. Thanks for the video!
😮😮0
No you are wrong. The material is a game changer
As a new dentist i use cosmedent. It has changed my work. The material is awesome. Results were shocking. V v expensive. But worth it. It has put in so much confidence
one of the best "Dental aesthetic" performing , like an artist
thx....... from Belgium
This is excellent information as I have always felt that my smile makeovers did not finish off in the way I initially projected as I end up seeing voids on the facial aspect. Now that I see where I was actually incorrectly adapting the composite material , im so anxious to test this method on my case that im engaging in the next few hours
Thanks for your comment, J. Rosa. The instrument is called the Almore. The company name that sells it is called Almore as well.
Beutifully explained and beautifully done. Thank you.
Thank you so much dr. Fahl! awesome work and great tips for us newbie 😊
This is so useful on so many levels 💎
Thank you Golden Gold, glad you find it useful! 😀
Dr. Newton Fahl showcases Composite Veneers in a great Tip of the Month
God bless you for your wonderful tutorial😍
Excellent work, it is really amazing to see a true talent and when you can do the work with passion. That is what i aspire to be, My question is would you recommend any other composites with similar properties 3M ESPE Z500 ? or CERAM X Duo ? as i cannot find the composite you used in UK. Many thanks and keep up the FANTASTIC work!
Hi, congratulations on your wonderful work!
How can get the products and instruments you have used in this case, here in the UK.
Thank you very much again for sharing your work with us.
Wow you are an artist ❤️❤️
superb work!! Is there any dvd or book of doctor fahl which is can buy? do you have a suplier in israel for your materials?
Congrats !! looks fantastic, where can i get those material in Mexico?
Is that any dental mold? I nerd one to practice😢
Beautiful Job
it really does look nice! Thx! Greetings from Portugal!
Hi...brilliant work. What is the name of the "flat spoon end instrument/spatula" that you used for initial placement of the composite ball on the tooth.
Quero comprar o opacificador apresentado no videio mas não o encontro como posso e com quem adquirir por gentileza?...tenho urgencia...moro em goiania .GO BRASIL
Mestrefalcao Artistaplástico Por Favor entre em contato com a Bazzi International. Telefone: + 55 41 3234 1061
excellent presentation by dr newton fahl. and excellent products by cosmedent. how can i buy your products in india. do u have a dealer in india.
It's like Art
It is art❤️
Hi. What instrument do you use to contour around the gingival margins?
dear fahl,two quieries,what the rpm speed for finishing discs,and should we use glecrin gel prior to full polymerisation?usually compo.stains over time esp at margins how to avoid? thank u for beautiful presentation
Can you please comment on the endurance of this veneer compared to ceramic either lab or office milled. Also if lengthening the incisal edge is needed so the veneer must entirely serve for edge strength regarding using resin. Thank you.
Hi doc can I ask you a question ?
Very goood tips, thanks....Dr. Falh rocks!
Amazing technique...thanks for sharing!
hi doc how you seperate the tooth when you did not use strips
My other challenge is closing of open inter-proximal areas and re shaping a new cosmetic appearance. Any advice guys?
Hi Dr. Gopaul, are are happy to hear you like this video! Here are a couple more that you might find helpful: www.cosmedent.com/videos/diastema-closure-perfection/
and www.cosmedent.com/resources/restorative_techniques_diastema_closure/
Let us know if you have any further questions.
hello! i've already searched in almore website for that composite spatulas, and apparently looks like the same but its not completely gold! and it looksthiner. is that the only one, or theres a special one for Dr.Newton fahl? please answer me, greetings
Awesome presentation
fantastic work.Can i find these instruments in Greece ?
where did you buy that instrument the spatula type?
Dr. Advani, you can use glycerin or oxalate gel prior to final finishing. The speed for the fishing disc is RPM 15,000. Feel free to contact Cosmedent at 800-621-6729 if you have any additional questions.
Great!! What is the first instrument (apparently golden spatula) you use to model composite? (Approx. in minute 6). I've got all the cosmedent anterior and posterior placement instruments, but not that one, I can't find it!!
Thanks!!
thank you, respectfully
Nice work!
Thank you!
Good tour
Omg, me next!
Too much gray in incisal area Dr. Newton. By and large nice work as for dentist. +5
Thank you ,it's very nice.
Amaziiiiiing🤩🤩🤩
Mastercraft level!
warvelous job,.
Thank you Fernando
Thanks for your nice comment, Dr. Roxy Wall. The name of the company that sells Cosmedent products in the UK is Enlighten Smiles Limited. You might contact them by calling +44 (0) 207 424 3270. Thanks, again.
Woooow woooow wooooow
How i can buy your proudcts in egypt ?
Beautiful
Love it
Thank you for sharing video you put a smile on my face I love tea I love bonding I can marry the bonding 😂😂💯🤭
That’s it 🙋♂️
precisso que me respondam em portugues
great work, but you didnt say anything about most important piece of your work. How to get rid and make it right in the aproximal area. You can clearly see theres a lot of junk out there between the teeth.
Super new technology
your the God of teeth wonderful work
all respect :) i love it
behave in this manner in the patient's head
Thank you, ortotube. Please call 1-800-621-6729 or go to Cosmedent's website and send us your request for more information.
Thanks for your nice comment vasso215. Our distributor in Greece is Maurice Faraggi S.A.- Phone: +30 2107489031.
You can also access our website to see more information.
Dr. Alfifi, you can contact Cosmedent at 1-800-621-6729 or go to our website and send us a request for more information.
Manar samer mom yuor see 🎓
Respekt
عالی بود
Ya we know Michelangelo.
Manar smaer mom yuor see