I love this! I ended up buying a Sunjoe and doing the mods on it. Now my stripes are poppin! Thank you so much for posting this. Way better than spending $2500 lol
Aye nice George! I swear lawn mower companies should just start making little mounts just in case we want to put conveyor rollers on in the future 😂😊🤙🏾🙌🏾🙏🏾
I want to get an earth wise 7 blade or the sun Joe. Looking at putting a front roller as well as back. I am new to reel mowing, what height does the front roller need to be at? Is it just set to the same height as the regular wheels? The back roller is what moves and changes the HOC? Trying to just get an understanding of the mechanics.
Did the same route you did. Just got my Fiskers reel mower. But took off front wheels, put on bed casters (6) with a 5/16 threaded rod, can now cut 3/8". Next trick add rear roller. May go with Sun Joe next will see how the Fiskers goes. Love your channel
Well…. It really just depends on the height of cut… if you’re cutting super low go to the lowest setting then install it… I installed it at the 2nd to last so about an 1” cut 😊🙏🏾🤙🏾🔥
Not only did this help mine with some scalping, it also changed up weight distribution and really brought out the stirpes. Do the wheel delete too and it's awesome.
@@robertocorreagonzalez6607 When adding the front roller you can remove the side wheels. Puts all the weight then on the front and rear roller. You do lose the ability to use as a push mower when the battery dies.
@@robertocorrea9364 I can try to pull measurements off. I just kinda eyeballed it. I found it easiest is to drill the 2 holes in the roller bracket sides first. Then line up the bracket and roller to the desired position and them mark the holes in the mower body. A jig for all this would be handy though.
I got you my dude! www.ultimationinc.com/replacement-parts/buy-rollers/16-roller-bracket/?device=m&kw=&matchtype=&placement=&location=9033491&network=g&devicemodel=&gclid=EAIaIQobChMIwJ3ivvfz9wIVeSCtBh2B2QyKEAQYAiABEgIEVPD_BwE 😊🙌🏾🤙🏾🙏🏾
@@YardBrah I'm running a manual reel mower this year. Your mods of the sunjoe make it a contender for my next mower. Your budget lawn builds speak to me my guy.
Great work- and love your upbeat positive attitude! The challenge- and maybe I'm the only one who experiences this-- is that the front roller presses the grass blades downwards at the precise moment that they need to be sticking straight up to be cut properly by the reel and bed knife. I can see that your grass type is particularly thick and healthy, and probably bounces straight back up, or maybe you compensate with a second, perpendicular, pass. In any case, you're going to laugh- but what I really need is a mod that eliminates or minimizes the rollers to avoid flattening the grass while the mower is passing over it. Thanks so much again! PS- just stumbled upon an image of the Fiskars product and I'm guessing this must be why their design uses two protruding front wheels- but, man, it looks cumbersome and severely limits how close you can push that front edge of the mower up to, say, a wall or sprinkler head.
Yeah I’ve always thought the same about front rollers… I have been looking at grooved type rollers but can’t find the right one to pop on! You might want to try and stretch a push broom to the front I heard that works well but also pushes it down 😂 grooved roller would be best for sure though 😊🙏🏾🤙🏾🔥
I am about to do this. Parts on the way. Wheels will stay so that it can be run w/o the battery. Sometimes I run out of battery just before I finish. So have to finish up with it as a push mower.
Anti scalp, say if your wheel goes up and you don’t have a roller the blade cuts the grass shorter as you’re going forward, in the video you can see when I mow and the wheel comes off the ground the roller is there to help aid in not scalping the grass 😊🙌🏾🤙🏾🙏🏾
@@YardBrah I feel your frustration on the McLane, I bought one that didn’t run and overhauled everything. It takes some time and a little $$, (and a few cuss words) but it’ll be worth it. I thought I noticed your main chain fairly loose, might wanna try and adjust it to get it a little tighter. That might be a reason it stops when you were trying to mow. Good luck bro & keep up the good work👍🏻😎
What's the name of the red flowers in front of your house? I also have China white landscaping rock at my house and the red pops out really good. Also here from Washington state eastern WA
If you take off the wheels it def gets way lower but you have to have the front and reel rollers to act like wheels. I’m guessing 7/16ths after the wheels are off but the sides do scrape a little bit 😊👊🏾🙏🏾🤙🏾 th-cam.com/video/_PTREmqcD6k/w-d-xo.html this video shows it laying on the ground pretty much 😊👊🏾🙏🏾🤙🏾
How does the front roller/ground contact look when adjusting through different mow heights? Any thoughts on whether mounting the roller a little farther forward (similar to Fisk at mods) would be more beneficial?
It’s def effects the positioning on various heights I keep it at 1.1 inches so it rolls the grass at the lowest setting and the 2nd lowest setting. If you mount the bracket horizontal and more forward I could see some benefit so height adjustments 😊🙌🏾🤙🏾🙏🏾
Yeah I’f the battery goes out you can still use it cause of the gears. I actually just took the wheels off and run it with just the rollers now 😊🙌🏾🤙🏾🙏🏾
Will v2.0 be roller only and ditch the wheels? Front roller on an adjustable rail like a John Deere greensmower. No wheels. You don’t need the self propulsion with your yard.
Email isn’t in my sent folder, and phone is full. But just sent you a shorter version. Anyway, should be in your inbox now. LMK if you want to see something else on the mower.
Prevents the blades from scalping the lawn... for instance on the corner edges of the lawn the mowers wheel doesn't touch the ground so the blade would come down lower and cut the grass shorter than you would want scalping the lawn so the roller aids in even coverage. Also aids the rear rollers for some nice striping 😊🙏🏾🙌🏾🤙🏾
Any tips on how to prevent wood chips from getting stuck between the blade and bed knife? I'd imagine it'll blow a fuse or burn-out motors when it happens.
I'm just getting ready to add on my roller to my Sunjoe and at 1:38 and at 2:44 how do you know how far down to put the roller? What setting do you have the mower on when you do the install?? Thanks man! And great content as always!
hey my friend, question about the roller you used, looks to be an ashland conveyer roller with bracket? happen to have a link? best I could find on amazon was a 2 roller pack with bracket for $40 for an inch and a half diameter roller of a random brand
@@YardBrah ah darn, I should have waited haha. ya the ones on amazon were the same brand and setup, just 2 for $40. oh well, they are on the way! front and back be here tomorrow, so excited. youre the best
Yeah I would have to get another 16” the 15 was a little too short I tried for sure 😂 if I’m bored I will buy another one and have it back there it would be nice so I can still put the bag on without taking the washers off 🙌🏾🙌🏾🙌🏾🙌🏾😊🤙🏾🙏🏾
Bought the roller last year but never got around to installing it and looking to do so this weekend! Question: how long are the 1/4" and 3/8" bolts? I imagine the length is critical so there is no interference when you put the wheel back on. Appreciate the video, man!
Aye nice! I forget the length but you just need enough to clear the metal frame… the reel is super far away from the roller so you’ll be fine just keep it short 😊🤙🏾🙏🏾🔥
Nice! Def a fun little reel!!! I bought this one here www.ultimationinc.com/replacement-parts/buy-rollers/16-roller-bracket/?device=c&kw=&matchtype=&placement=&location=9033495&network=g&devicemodel=&gclid=CjwKCAjwqauVBhBGEiwAXOepkRKLIEl7jMv2gQrL8HUKjhV-E-VIR9wv9FRD_PH_5006wSg-bjY-phoCahgQAvD_BwE 😊🤙🏾🙏🏾🙌🏾
@@Finalsuspect1468 my bad good catch here is the link www.ultimationinc.com/replacement-parts/buy-rollers/16-roller-bracket/?device=c&kw=&matchtype=&placement=&location=9033495&network=g&devicemodel=&gclid=CjwKCAjwqauVBhBGEiwAXOepkRKLIEl7jMv2gQrL8HUKjhV-E-VIR9wv9FRD_PH_5006wSg-bjY-phoCahgQAvD_BwE 😊🤙🏾
yard Brah, great content and U funny as hell, on the front roller when U attached it to the sun joe was the sun joe on the lowest setting? After sub-ing and watching ur vids I orderes me one with all the mods you have I think the reel mowing will take my yard to the next level..thanks brah
Purchased one of these units in August. Worked like a champ for a bit then motor just stopped working. Sun Joe is out of stock and can't do a warranty replacement. Anyone else have this issue??
😂😂😂😂😂 oh but it makes all the difference! Do it do it!!! 😂 your lawn looks pretty flat though and you have a lot of space I have a lot of edges 😂😊🤙🏾🙏🏾🔥🔥🔥🔥
Hey YardBrah, for interest, we can't get the Sun Joe down in New Zealand, but we have a Ozito 18v Reel mower which people are modifying - see this th-cam.com/video/_3K5QoucwnE/w-d-xo.html Loving your vids.
They'll see you rollin!
😂😂😂yes!!! Comment pinned! 😊🙌🏾🤙🏾🙏🏾
@@YardBrah Thank you!!!
I love this! I ended up buying a Sunjoe and doing the mods on it. Now my stripes are poppin! Thank you so much for posting this. Way better than spending $2500 lol
Oh for sure!!! Modded Sunjoe is a nice alternative to the big dog mowers obviously not the same but pretty damn close! 😊🙏🏾🤙🏾🙌🏾
Your subscribers are about to start sending you there Mowers for Mods haha
😂😂😂 that’s why I do this vids so I can inspire other lawn dudes to DO IT YOURSELF 😂😂😂🙏🏾🙏🏾🙏🏾🙏🏾😊🙌🏾🤙🏾🙏🏾
Those Ashland conveyers are awesome, I have one on my earthwise 7 blade
Aye nice George! I swear lawn mower companies should just start making little mounts just in case we want to put conveyor rollers on in the future 😂😊🤙🏾🙌🏾🙏🏾
@@YardBrah If they do I have a patent on that and they will owe me royalties 🤣
I want to get an earth wise 7 blade or the sun Joe. Looking at putting a front roller as well as back. I am new to reel mowing, what height does the front roller need to be at? Is it just set to the same height as the regular wheels? The back roller is what moves and changes the HOC? Trying to just get an understanding of the mechanics.
The lawn gods are look down on you like,.......... brahhhhhhhh killed it
Haha they were like yeah let’s make it fit for him 😂😂😂😊🙌🏾🤙🏾🙏🏾
Been wanting to get that sunjoe for a min. You got me to pull the trigger on it and both roller kits. Thanks man!
Aye! That’s awesome! It’s a fun little reel mower! 😊🙏🏾🤙🏾🙌🏾
So gonna do this. Thanks for a quick follow up vid my dude. 🤙
Aye! You’re gonna have a blast doing in! Sunjoe needs to make a front roller! 😂😊🙏🏾🙌🏾🤙🏾
Bro you killed it, just awesome and sunjoe make this a thing option, thanks because just in time for a new mower
😂 yes! I wish they had these holes pre drilled so we had the option to put something on! It was fun doing it though! 😊🤙🏾🙌🏾🙏🏾
Oralé brother nice man
Muchas ah-gracias my dude! 😂😊🙌🏾🤙🏾🙏🏾
Did the same route you did. Just got my Fiskers reel mower. But took off front wheels, put on bed casters (6) with a 5/16 threaded rod, can now cut 3/8". Next trick add rear roller. May go with Sun Joe next will see how the Fiskers goes. Love your channel
Aye nice! would love to see pics of the bed casters on your fiskars! Yardbrah@gmail.com 😊🤙🏾🙌🏾🙏🏾
@@YardBrah Just sent photos now.
Master fabricator!
😂😂😂 thanks Darrick! I dabble… 😂 😊🙌🏾🤙🏾🙏🏾
You did it! Clearance for days! 😂
😂😂😂 HELLA clearance 😂😂😂💀💀💀😊🤙🏾🙌🏾🙏🏾
Great job Brah. Striperman has a new hero. Excellent how to video. 👍💚🦸♀. Lawn looks great too
😊😊😊😊🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾 thank you very much Striperman!!! 😊🤙🏾🙌🏾
Dang bud you gave it a haircut!! I really like it short man! Looks great!!
Nice and toight 😂😂😂 Thank you my friend! 🙌🏾🙌🏾🙌🏾🙏🏾🤙🏾😊
My brother just got my front roller is there anything u would do different now from the time u installed this one
Well…. It really just depends on the height of cut… if you’re cutting super low go to the lowest setting then install it… I installed it at the 2nd to last so about an 1” cut 😊🙏🏾🤙🏾🔥
Not only did this help mine with some scalping, it also changed up weight distribution and really brought out the stirpes. Do the wheel delete too and it's awesome.
Aye Chris that’s awesome!!! Feels like it should have been in the first place right! 😊🤙🏾🙏🏾
What Wheel Delete?
@@robertocorreagonzalez6607 When adding the front roller you can remove the side wheels. Puts all the weight then on the front and rear roller. You do lose the ability to use as a push mower when the battery dies.
@@chriskreutzer1300 do you know the measurements to drill the holes? I have asked but couldn't get an answer.
@@robertocorrea9364 I can try to pull measurements off. I just kinda eyeballed it. I found it easiest is to drill the 2 holes in the roller bracket sides first. Then line up the bracket and roller to the desired position and them mark the holes in the mower body. A jig for all this would be handy though.
Can you post the info for the roller kit you purchased? Couldn’t find a link for it posted in video info.
I got you my dude! www.ultimationinc.com/replacement-parts/buy-rollers/16-roller-bracket/?device=m&kw=&matchtype=&placement=&location=9033491&network=g&devicemodel=&gclid=EAIaIQobChMIwJ3ivvfz9wIVeSCtBh2B2QyKEAQYAiABEgIEVPD_BwE 😊🙌🏾🤙🏾🙏🏾
All killer Brah. You need to make a mounting template FOR THE PEOPLE
Ah-thank you! Man I need to dial it down more! I want it fully adjustable for each height… still a work in progress 😂😊🤙🏾🙌🏾🙏🏾
@@YardBrah I'm running a manual reel mower this year. Your mods of the sunjoe make it a contender for my next mower. Your budget lawn builds speak to me my guy.
@@Whack.Attack Thank you so much for the support! You can't go wrong with an electric reel for $200 for sure 😊🙏🏾🤙🏾
Great work- and love your upbeat positive attitude! The challenge- and maybe I'm the only one who experiences this-- is that the front roller presses the grass blades downwards at the precise moment that they need to be sticking straight up to be cut properly by the reel and bed knife. I can see that your grass type is particularly thick and healthy, and probably bounces straight back up, or maybe you compensate with a second, perpendicular, pass. In any case, you're going to laugh- but what I really need is a mod that eliminates or minimizes the rollers to avoid flattening the grass while the mower is passing over it. Thanks so much again!
PS- just stumbled upon an image of the Fiskars product and I'm guessing this must be why their design uses two protruding front wheels- but, man, it looks cumbersome and severely limits how close you can push that front edge of the mower up to, say, a wall or sprinkler head.
Yeah I’ve always thought the same about front rollers… I have been looking at grooved type rollers but can’t find the right one to pop on! You might want to try and stretch a push broom to the front I heard that works well but also pushes it down 😂 grooved roller would be best for sure though 😊🙏🏾🤙🏾🔥
I'm liking all of these fabrication videos!
I mean… I was fabricating drift cars for the longest time why not fabricate the things I use everyday 😂😂😂😊🤙🏾🙌🏾🙏🏾
@@YardBrah I should have known by measure 600000 times and cut once 😄. Came out looking like a factory add on. I like it!
@@TheMoreYouMOW haha! thank you! you gotta measure you know me I'm anal retentive 😂😂😂
Damn brah!!!
Aye thank you 😊🙏🏾🙌🏾🤙🏾
I done the same to my einhell which is just the same. But why dud you put the wheels back on?. They just get in the way.
Noice…. And you’re right…. Gonna find a way to cover the gears… or just rock it naked like that! Thank for the idea!!! 😊🙌🏾🤙🏾🙏🏾
I am about to do this. Parts on the way. Wheels will stay so that it can be run w/o the battery. Sometimes I run out of battery just before I finish. So have to finish up with it as a push mower.
@@chriskreutzer1300 oh smart! Yeah my tiny little 500sqft patch I can remove the wheels cause the battery will last 😂 😊🙏🏾🤙🏾🙌🏾
YardBrah, u da Man.
Thank you my friend!!! This Sunjoe is kicking butt this year
That’s truly amazing work
Thank you 😊🙏🏾🤙🏾🔥🔥🔥
Can you make a video the aerator that you used one that looks like a brake disc on a pole
I have one check it out my dude! th-cam.com/video/VzFooDSQuLQ/w-d-xo.html 🙏🏾🙌🏾🤙🏾😊
Adding this front roller mod, what exactly are the benefits of doing so?
Anti scalp, say if your wheel goes up and you don’t have a roller the blade cuts the grass shorter as you’re going forward, in the video you can see when I mow and the wheel comes off the ground the roller is there to help aid in not scalping the grass 😊🙌🏾🤙🏾🙏🏾
Dude! That thing is a Cadillac! 👍🏻 Now if El Diablo will cooperate… Great job bro 😎
😂 freakin el Diablo! Yeah the Sunjoe is feeling goo-ah-d! 😊🤙🏾🙏🏾🙌🏾
@@YardBrah I feel your frustration on the McLane, I bought one that didn’t run and overhauled everything. It takes some time and a little $$, (and a few cuss words) but it’ll be worth it. I thought I noticed your main chain fairly loose, might wanna try and adjust it to get it a little tighter. That might be a reason it stops when you were trying to mow. Good luck bro & keep up the good work👍🏻😎
What's the name of the red flowers in front of your house? I also have China white landscaping rock at my house and the red pops out really good. Also here from Washington state eastern WA
Aye nice we are kinda neighbors 😂 Pink flowers are azalea’s 🌺🌺🌺 😊🙏🏾🤙🏾
How u liking them rear rollers
oddly enough, I'm more likely to buy it after seeing how it can be modded :) Just picked one up from Amazon.
Aye that’s awesome!!!!! You’re gonna love it it’s so fun modded! 😊🤙🏾🙏🏾🔥🔥🔥
Sick!! Good work man!
Thank you! 😊🤙🏾🙌🏾🙏🏾
Beastmode!!! 🤙
Ah-yes! 😊🙏🏾🤙🏾🔥🔥🔥
Great mod 👍
Ah-thank you my dude! 😊🤙🏾🙌🏾🙏🏾
Just moded mine today. Stripes great but the bagger will no longer attach. Is there a work around for this?
If you take off the washers you can keep the bag on 😊🙏🏾🤙🏾🙌🏾
Looking fricken, a-good!
Ah-thank you ah- my dude 😂🤙🏾 🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾
Did this maintain the minimum HOC at 0.6 in or is there a way to go lower?
If you take off the wheels it def gets way lower but you have to have the front and reel rollers to act like wheels. I’m guessing 7/16ths after the wheels are off but the sides do scrape a little bit 😊👊🏾🙏🏾🤙🏾 th-cam.com/video/_PTREmqcD6k/w-d-xo.html this video shows it laying on the ground pretty much 😊👊🏾🙏🏾🤙🏾
How does the front roller/ground contact look when adjusting through different mow heights? Any thoughts on whether mounting the roller a little farther forward (similar to Fisk at mods) would be more beneficial?
It’s def effects the positioning on various heights I keep it at 1.1 inches so it rolls the grass at the lowest setting and the 2nd lowest setting. If you mount the bracket horizontal and more forward I could see some benefit so height adjustments 😊🙌🏾🤙🏾🙏🏾
@@YardBrah so helpful! Looking into going this route as I move away from my rotary mower. Appreciate the details and enjoy the videos.
Can you still get down to the lowest .6 inch setting with this?
I just measured today and it’s def a little over 1/2 at the lowest setting so yes exactly 15mm! 😊🙏🏾🤙🏾🙌🏾
@@YardBrah thanks for the awesome content!!
@@Finalsuspect1468 Thanks for tuning in!!!! 😊🙏🏾🙏🏾🙏🏾🤙🏾
Cannot find cost and availability on you
R Amazon link for the mower kit? John
You know what’s crazy I’ve had 30 orders on that link I think they sold out 😂😂😂 if you click buying options there are a couple there! 😊🤙🏾🙏🏾
Does that thing have driven wheels? I noticed there were gears behind the wheels when you took them off.
Yeah I’f the battery goes out you can still use it cause of the gears. I actually just took the wheels off and run it with just the rollers now 😊🙌🏾🤙🏾🙏🏾
@@YardBrah are they driven all the time?
Will v2.0 be roller only and ditch the wheels? Front roller on an adjustable rail like a John Deere greensmower. No wheels. You don’t need the self propulsion with your yard.
Can DM you some close up photos of my JD greensmower if you want to see the adjustable rail. That’s how my mower controls height of cut.
Ah-yes please yardbrah@gmail.com and yes v2.0 will be tested very soon!!! 😊🙌🏾🤙🏾🙏🏾
@@YardBrah check your inbox
Email isn’t in my sent folder, and phone is full. But just sent you a shorter version. Anyway, should be in your inbox now. LMK if you want to see something else on the mower.
Nub at reel mowing here. What does that front roller do?
Prevents the blades from scalping the lawn... for instance on the corner edges of the lawn the mowers wheel doesn't touch the ground so the blade would come down lower and cut the grass shorter than you would want scalping the lawn so the roller aids in even coverage. Also aids the rear rollers for some nice striping 😊🙏🏾🙌🏾🤙🏾
@@YardBrah thanks!
Any tips on how to prevent wood chips from getting stuck between the blade and bed knife? I'd imagine it'll blow a fuse or burn-out motors when it happens.
Bro you can make those roller as kits and sell them
It’s all just for fun T! 😊🙏🏾🙌🏾🤙🏾 do it I provided the parts list 😂😊🙏🏾🙌🏾🤙🏾
@@YardBrah lol.i know
I'm just getting ready to add on my roller to my Sunjoe and at 1:38 and at 2:44 how do you know how far down to put the roller? What setting do you have the mower on when you do the install?? Thanks man! And great content as always!
Did you figure it out? Just ordered mines
Also want to know this, getting ready to do this install.
hey my friend, question about the roller you used, looks to be an ashland conveyer roller with bracket? happen to have a link? best I could find on amazon was a 2 roller pack with bracket for $40 for an inch and a half diameter roller of a random brand
I got you my dude! 😊🙌🏾🤙🏾🙏🏾🙏🏾🙏🏾 www.ultimationinc.com/replacement-parts/buy-rollers/16-roller-bracket/
@@YardBrah ah darn, I should have waited haha. ya the ones on amazon were the same brand and setup, just 2 for $40. oh well, they are on the way! front and back be here tomorrow, so excited. youre the best
Would you sell this setup?
Can’t find any more Sun Joe’s. 😩
I ordered the roller from another comment. Can you let me know what size and length bolts you bought as well?
Yes top thicker bolts are 3/8 and the smaller lower are 1/4 any thread pattern will work as long as your nuts are the same 😊🙌🏾🤙🏾🙏🏾
I wonder if you use the same roller on the back and just replace the rod and the plastic rollers???🤔🤔🤔 have you sent back that 15” one yet???
Yeah I would have to get another 16” the 15 was a little too short I tried for sure 😂 if I’m bored I will buy another one and have it back there it would be nice so I can still put the bag on without taking the washers off 🙌🏾🙌🏾🙌🏾🙌🏾😊🤙🏾🙏🏾
Why the 1/4 and 3/8 bolts - why not both 1/4 or both 3/8?
Anyone know where I can find this reel mower? Seems to be sold out everywhere I look online.
Bought the roller last year but never got around to installing it and looking to do so this weekend! Question: how long are the 1/4" and 3/8" bolts? I imagine the length is critical so there is no interference when you put the wheel back on. Appreciate the video, man!
Aye nice! I forget the length but you just need enough to clear the metal frame… the reel is super far away from the roller so you’ll be fine just keep it short 😊🤙🏾🙏🏾🔥
Most tricked out sun joe on TH-cam for sure!!😂
😂 thanks for tuning in! Now all I need is an led bar for it 😂😂😂😊🙌🏾🤙🏾🙏🏾
I'm buying one of these mowers any day now. Where did you get that roller?
Nice! Def a fun little reel!!! I bought this one here www.ultimationinc.com/replacement-parts/buy-rollers/16-roller-bracket/?device=c&kw=&matchtype=&placement=&location=9033495&network=g&devicemodel=&gclid=CjwKCAjwqauVBhBGEiwAXOepkRKLIEl7jMv2gQrL8HUKjhV-E-VIR9wv9FRD_PH_5006wSg-bjY-phoCahgQAvD_BwE 😊🤙🏾🙏🏾🙌🏾
Thanks! I noticed in the video the 15 inch one didn't work, did you just have to search for the 16 inch version?
@@Finalsuspect1468 my bad good catch here is the link www.ultimationinc.com/replacement-parts/buy-rollers/16-roller-bracket/?device=c&kw=&matchtype=&placement=&location=9033495&network=g&devicemodel=&gclid=CjwKCAjwqauVBhBGEiwAXOepkRKLIEl7jMv2gQrL8HUKjhV-E-VIR9wv9FRD_PH_5006wSg-bjY-phoCahgQAvD_BwE 😊🤙🏾
@@YardBrah you the man!!
yard Brah, great content and U funny as hell, on the front roller when U attached it to the sun joe was the sun joe on the lowest setting? After sub-ing and watching ur vids I orderes me one with all the mods you have I think the reel mowing will take my yard to the next level..thanks brah
Did you figure it out bud? Just ordered mines
@@leomerino3906 no I can't find the reel mower, u know where I can buy it?
New here but bruh…this is some nasty 🤮 dope ass shit! Sooo gud, I just can’t help myself!!! Fire 🔥
Thanks my dude!!! Really appreciate the support!!! 😂😊🙌🏾🤙🏾🙏🏾
Purchased one of these units in August. Worked like a champ for a bit then motor just stopped working. Sun Joe is out of stock and can't do a warranty replacement. Anyone else have this issue??
I can’t find these I think sunjoe not making them anymore
Epicly sweet!
I challenge your sun Joe to a striping contest!
As always, it’s looking fan-ominal!
haha! soon I need these patches to thicken up a bit!... and I have to go to Les Schwab 😉
Now you just need a comb
Yes you’re right def need a little mustache in the front for Sunjoe 😂😊🤙🏾🙏🏾🔥👊🏾
Can't seem to buy Sun Joe anymore. 😕
cool
😊🔥🤙🏾🙏🏾
Nope, not doing this one LOL. I'll stick with the rear. LOL
😂😂😂😂😂 oh but it makes all the difference! Do it do it!!! 😂 your lawn looks pretty flat though and you have a lot of space I have a lot of edges 😂😊🤙🏾🙏🏾🔥🔥🔥🔥
So now its a $200 Sun Joe mower
I forget what I paid for it but yes def adds a little to the cost about $50-60 for the rear and front roller 😊🤙🏾🙏🏾🔥
Dear Sunjoe, just copy these mods and name it the YardBrah Edition from factory
😂😂😂😂🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾 could you imagine 😂😊🙌🏾🤙🏾🙏🏾
Hey YardBrah, for interest, we can't get the Sun Joe down in New Zealand, but we have a Ozito 18v Reel mower which people are modifying - see this th-cam.com/video/_3K5QoucwnE/w-d-xo.html Loving your vids.
Oh nice I’m gonna check it out tonight!!!! 😊🤙🏾🙌🏾🙏🏾