Tron 700 Dnamic maiden flight goes almost perfect
ฝัง
- เผยแพร่เมื่อ 10 มิ.ย. 2024
- This is the maiden flight for my Tron 700 Dnamic heli. I have it set up running 12S at least for now. I wanted to try this set up since I already had all the proper electronics to do so. Maybe I'll go a little smaller on the esc and swaap out the motor at some point to go 6S and make it even more light weight but for now this is how it will fly. Overall pretty happy with how the maiden went.
- บันเทิง
I was wondering if the electronics I have would work. I have a Kontronik Pyro Competition 650-62 motor, YGE Aureus 105 ESC, KST X15-1208 mini servos, Protek 270 SBL Tail Servo, 2 - SMC 3600 HV 6S Batteries
I am not familiar with that motor but I know I had to trim the canopy a bit for better clearance in mine and you may have to do the same. My 3300 packs are pretty snug so depending on the dimensions the 3600 packs might be snug as well since my batteries are older. If yours are newer they will probably fit. Everything else should be fine.
It's our fun fly this weekend so I should get to see one up close. My motor will fit. Also the batteries I use are high voltage. So they are the same size as 3100 mah regular lipos.
whats your setup ?
Running on a 12S set up. Castle 160 esc, Scorpion HKIII 4035-500kv, KST servos, Rail 696 mains and 105 tail and on Pulse 3300 mah lipos. ESC is overkill but its electronics I had from another heli. Couple of flight on it now and it flies amazing!
@ken below is my setup on the Dnamic and it fly's like a dream brotha.
Tron 700 Dnamic
Xnova 4025 1120 KV (13T Pinion)
RC Battery 6S 5000 Mah 65C
HobbyWing 150ESC
KST 9015 HV
FrySky x20S
RT Ultimate 700 Main Blades
RT 105mm Tail Blade
HeadSpeed (1980RPM)
Pitch 14* +-