The 10 WORST MX-5 Miata Modifications | [Are YOU on The List?]
ฝัง
- เผยแพร่เมื่อ 3 มิ.ย. 2024
- The Mazda MX5 Miata is a fantastic car to mod, but some people go the wrong way with their cars. Are you one of them? In this video we go over the top 10 WORST mods you could do to your Mazda MX5 Miata. The flip side is, if you do the right thing with these mods, this list is also a 10 BEST Miata mods!
1) The classic “hot air intake”
2) Clear aftermarket tail lights, with a bonus of low profile headlights, lazy eye headlight mod
3) Cheap coilover kits / lowering springs
4) Race motor mounts
5) “Mouse trap” style bars (Fake Roll Bars)
6) Cheap tires
7) Heavy wheels
8) Aftermarket exhaust systems that drone
9) AC Deletes in hot climates
10) “Widebody” kits that make your cars look like hovercraft
CashedOutCars, Cashed Out Cars, CashedOut Cars
#MazdaMiata #MiataMods #WORSTModifications For additional content, check out www.cashedoutcars.com! - ยานยนต์และพาหนะ
I support ANY mods that you choose to do to your car, as long as they don’t endanger others. Building a car is something that should make you happy, and if you like your mods do them. I mostly made this video to see what kind of (and how many) comments it got. Build on and keep having fun with your cars!
I am guilty of the low-rise headlights. Of course, I have the original headlights in my garage if I ever want to reinstall them.
Not sure if I’ll get a response, but as a Northern Californian, I have a car that came with factory no AC. Is there any possible way to have an AC retrofit as a mod?
@@kingkatguitara265 Ex air Con Engr here: Very, very expensive.
The whole dash has to come out for starters, to replace the heater matrix with the dual "radiators" (Evaporator to be specific with the AC coil.)
Then the electrics: another nightmare. The condenser coil (Fitted in front of the Engine radiator )is probably pretty straight forward.
The only "easy" part of the operation is probably bolting the compressor onto the engine! But OE parts, brackets, pulleys, tensioner etc....will not be exactly cheap.
I guess you could get all you need out of a write-off Vehicle if you can find one.......but only if you handy enough to do the job yourself.
In short: Cheaper to trade-up your car to one that has factory fitted AC . Sorry! But the truth sometimes hurts!
Good to know I can put truck nuts on my miata and it won’t be considered one of the worst miata mods
If you do it I’ll make a part two :)
I’ve considered doing this for gits and shiggles
Hahaha
@@CashedOutCars 😂😂
There's a guy near me with nuts on his
Most of these were just "don't cheap out"
Yes for the most part. There’s a reason most parts are generally cheaper
Putting big googly eyes on the headlights is yes
No way would I delete my A.C. Greetings from too-hot Florida.
I agree, even winter is toasty down there!
I’m in the process of buying a miata and it has no ac 😂 I’m going to put the condenser right back in
CashedOutCars ac delete is not for weight reduction.it’s to free up power cause it runs on the crank of the engine.removing it equals less belts the engine has to move
The amount of power it draws when the compressor clutch isn’t engaged is negligible, the biggest benefit is space and weight. The power freed up will be very small, but I agree it’s a very slight benefit. I’ve had mine disconnected for months and it feels no different than with it
I wouldn't even do that shit, and I live in Delaware, lol.
If you really want a cone filter, make yourself a heat shield, this helps block some of the exhaust heat
*Cold air intake* Mounted upon exhaust headers AHAHAHHAHAHAHAHA
There’s a reason it’s on this list!
My personal list: Stickerbombing, Rattle can painting (body panels not valve covers and stuff), obnoxiously large shift knobs, chassis mount wings, “drift charms”, cross tape on headlights, canards, excessive camber/stance. And a hate of mine (not a mod) is just people “abusing” miatas, since its a cheap car people feel the need to just break, rice, mistreat, and cheap out on parts. Sad to see such a great vehicle not built to sema levels of cool as say a supra or a skyline as often just because of its price tag and hp number even tho the rest of the car is just as amazing.
Aye I have a Kirby drift charm and I think it’s cute asf; I love it
I think stickerbombing is ok as long as it’s not too much. A few stickers on the window or inside is ok as long as it’s not a lot
@@10aenbme43 thats cool man, rock your car how you like. I just think they look a little immature to me🤷♂️
@@johnsonbecomer6262 i personally dont like stickers on my car. A few here or there for some people can be nice but sticker bombing implies the entire piece is covered in stickers. Like how you would do the bottom of a skateboard.
MMMM... Spray painted wheels anyone? Painted White letters on tires? Ohwait
PS: Sub'ed!
Thanks for the sub, I didn’t say I wasn’t on my own list! I didn’t paint these wheels, I bought em that way. The tires I did letter though, I like em
@@CashedOutCars It's all good. I'm guilty on some fronts- none of these but still
@@CashedOutCars The white letters is something from the 70's (I was there, lol) and I always love it. But I worry about cleaning, in case they absorb either brake dust or just grime from the road.
I have a video on the channel about cleaning them. They held up pretty well!
First mods i did on my first MX5:
- Galaxy shifter boot
- Dragonball shift knob
- QSP deep dish steeringwheel
- Toycar cityplan floormats
- a USB LED disco light
- Rising sun sticker
- velvet wrapped tombstone
- carbon wrapped ashtray
- french spec yellow headlights
- Yoshimura sticker ON the exhaust(bad idea)
- Ducktail spoiler
- RS front and back lip
- vinyl tinted window on Hardtop
- white markered the tires
- dragon center wheel cap stickers
Yikes
IMO the people at Mazda knew what they were doing and did the leg work to make a pretty much perfect car. I don't see many mods which will improve it. The attention taken to detail in conception is amazing - even down to panel testing various exhaust configs in order to choose the most pleasing tone, and designing the door mirrors to deflect airflow away from the occupants faces when the top is down.
My UK spec 1995 1.8iS has a hot air intake because a previous owner had fitted one. I've added a homemade heat shield.
As for modifying the pop ups I've never understood why anyone would do that. They are the signature of the car. Maybe the sealed beam units are a bit feeble at night? Dunno. Here in Europe we have H4 units, so with decent quality bulbs and properly adjusted lights I've found no problems lighting my way through the mountains of the Ardeche (France).
I'd never fit a body kit, ducktail or wing - just more opportunities for water to get trapped and cause more tinworm IMO. But my biggest hates are stancing or those truly ridiculous dildo sized gear shifters, if you're gonna fit one of those you may as well make it penis shaped and pink and be done with it.
Great video BTW.
I agree, they’re great cars stock!
The few improvements i recommend are a aluminum radiator, JDM OEM Fog lights, NB suspension, Canvas Convertible Top, wilwood front brake calipers, stronger shifter, stage 1 Clutch kit, Tubular sway bar and a stronger heat shield. My car has all these for QoL improvements. I also added cruise control, a oem power antenna and the original Mazda Miata R-Package Spoiler and Front lip. Never cheap out on a car people!
Tbf those long “dildo shifters” do serve a purpose IN A DRIFT CAR, if you are gonna drift they are GREAT because they allow you to shift then get back to the steering wheel as soon as possible
TLDR: long shifters let you get less time away from steering wheel since you don’t have to reach as far away
I swapped my mirrors on my NA for a set of cockpit mirrors from an F-4 Phantom. Because they mount internally and are slightly convex, they do require some adjustment, but removing yhe external side mirrors cut buffeting in the cabin by almost 100%!!!
You just have to reroute the cold air intake
Yes that’s the good way to do it, which is why I wrote the disclaimer in there. Lots of people do it the way I did which is bad for performance
@@CashedOutCars There are also heat-resistant blankets to put over the exhaust-headers, which also keep a good amount of heat to radiate into the enginebay ;-)
@@mrlooneycooney8948 I did that and also have heat shield around filter 😊
The ac removal is not for weight reduction. It’s to remove it from the belt and it does release more power than any of the other mods mentioned. I agree however, not worth roasting in traffic for. I loved the fact I could just reach back and flip my top up and go to ac when I made the wrong decision topless or not.
The A/C system doesn’t add any drag to the motor unless it’s turned on. The A/C system weighs about 45 pounds so it’s not bad to remove if it doesn’t work or if you care more about performance than comfort.
The idea of lowering a Miata causes me a headache. Is she not low enough???? Thanks for the roll bar comment. That's a safety issue. Ditto on the tires. Agree with your list. And, I like that you didn't over apologize for having an opinion. You said it up front! Good enough...let 'ear rip.
For motorsports use you'll definitely want to lower the car as you're not going to be able to hit camber targets at stock ride height and it rolls a lot at that height. Mine is mildly lowered and still needed extended lower balljoints to hit camber targets and rolls A LOT. I am going to Xidas and it'll be significantly lower which is kind of a bummer but is necessary to get the performance I am after.
Agree. With a daily driver going lower creates issues. I would rather spend time driving vs fixing or worrying.
Just got a stock NC1 and the ride height is garbage. Crazy body roll around corners and waiting for coil overs to come in to fix it
The only mods I would do on a Miata are quality of life improvements like LED blubs, otherwise I would do whatever I can to keep the car as stock as possible. I wish production of the NA Miata was much longer, or I wish it could be revived. Imagine having a new NA Miata made exactly like how it was in the 90s out in the streets now
My 93 is pretty clean!
Great info, thanks for sharing.
Btw great video mate, don' t stop them. My NB Miata only has larger and outie wheels and 205/15 tires.
I’m on $100 used race lands you just gotta be bout it 😂😂
You’re a brave man🤘🏻
same bro
Raceland coils bro, love hitting small divots in the road and having my glove box slam open with its contents flying out too.
Have them on my 2001 they are good no problems way better than stock
widebody/sleepy eyed miatas make me depressed
Me too, they look broken to me!
@@CashedOutCars In my opinion sleepy eyed Miatas looks ugly the original pop-up headlights are better
How ya ganna hate on rb miatas they look soo cool
I sleep eyes are cool, dunno bout the wide body tho.
me, who prefers wide body and sleepy eyes:
/:
Good point about the roll bars. Thanx for that one !
Thanks! That’s certainly an important one to take note of
Cash, your roll bar looks awesome, what brand so I may purchase one of those, sir. Thank you.
Basically a video on every thing i regret Doing to my miata
I removed my AC, the condenser was rotted out anyway and I needed room for intercooler piping. Doesn't get too hot in NZ apart from a few days in summer and it's not my daily driver. I did add more insulation around the tunnel and floor and heat shielding around the dump pipe as the floor gets hot on a turbo Miata. Definitely makes it bearable on longer drives on a hot day.
Your channel is one of the better Miata oriented channels. Very good content, well prepared, and well presented. 👍
Thanks my man! I try to improve with every video. This one was a bit of a joke, but it still did alright!
100% correct! There’s so many that could be added like big wings on a stock street car or worse fake wings screwed to the trunk lid but you hit some good ones.
Great video man.
Thanks my friend!
great video
it’s been 2 months or so since i removed my AC and i deeply regret it lol
ilmotorsport 40% stiffer rubber motor mounts are actually really decent. If you have to replace your motormounts anyway just roll with those. The extra vibrations aren't too bad and it actually reduces drivetrain flex. If you combine it with the ilmotorsport diff mounts you will find yourself missing shifts less often because of the whole drivetrain flexing. I have both in my dailly.
I’ll have to check them out! That sounds similar to the OEM competition mazda mounts that are available. Not so stiff that they ruin the car to daily drive but a good step up. Enjoy!
You are spot on!!
Appreciate the rock music in the background
🤘🏻🤘🏻🤘🏻
This guy just listed basically everything the average project Miata has
Im guilty of: 1 but i made a heat shield and did advanced the timing also port matched the head, intake and, exhaust manifolds while i was doing the headgasket after noticing an oil leak from between the head and the block, 5 my style bar is weird tbh i cant find any other like it, its not like all the other ones that you can just feel how flimsy they are, this one has a 3/8 inch thicc bar that goes across the bottom with bolt holes for a racing harness and the tubing is thicc like 3/32, it looks custom made, 6 i wouldnt say my tires are super cheap but they are inexpensive, but i go with 195/50/r15 lexani lx 313, just because theres a good balance for me between grip and slip, 8 i have a manzo catback and high flow cat, yeah it drones, but i just wear ear plugs on long drives, 9 my miata has no a/c or p/s and i live in 90+ degree weather, i just roll the windows down and unzip the rear plastic.
Tbf, i just bought a miata 2004 a week ago, its in amazing condition, absolute 10/10 low mileage, serviced every 700-1k miles, its got no body scratches at all, only on 66k miles. I have an entire list of mods to do with the car but always try and watch these types of vids to see what to avoid and see what others think as well as any advice i can get
Most of these i would agree with except the low profile headlights. Ive had it for a long time and really like it.
Some people love em, and they do have performance benefits when up. I personally like the classic look, but to each their own! Enjoy yours!
Where did you get those leather interior add ons? Looks amazing man!
Thanks man! I made them, I'll be selling them soon! Keep an eye out at www.etsy.com/sg-en/shop/CashsCustomShop
5:06 I drive with crappy rear tyres
and it makes the expirience really really fun idk what you are talking about bro :D
It certainly makes it fun to get a bit sideways! Like I said these tires have a bit too much grip to easily slide without really pushing the car
I personally like the sleepy eye if done right. I’ve seen them setup where the regulator for the headlight motor is adjusted to about half way with light bars instead
Yeah it’s not really a bad mod, just personal preference on that one. Less drag too when they’re up
Ha this is the first time iv seen it but love it shame I have a mk2
Bruh, my dream car, shame that this didnt came to production here in Brazil, well some are imported but you know the price is too high...
That's interesting that they didn't make it to Brazil.. I hope you can get one some day!
The three best mods that i would recommend to ANYONE (though #3 comes with an asterisk): 1. Lightweight flywheel, 2. LSD rear end (i think mine was from an FC Rx-7, it's been a while), and 3. Replacing all mirrors with a set of cockpit mirrors from an F-4 Phantom!
The first two are no-brainers, but the third one turned out WAAAAAAY better than I'd hoped, but with a catch. They mount internally by design (they're from a fighter jet after all) and they're slightly convex. Took about a month for my eyes to adjust and stop seeing double each time I looked in them. And because i didn't fab taller brackets and just used the stock aircraft cockpit mounts, putting the top up renders both side mirrors uselss and leaves BARELY enough of yhe rear view mirror useful enough for legality. I never put my top up so this isnt an issue for me. But removing the stock side mirrors cleaned up airflow so much that it basically eliminated cabin buffeting entirely! All i feel now is the minor eddy current from around the windshield.
But best of all, they look sooooo fucking cool!❤❤❤
Looking to get an NA miata down the road, hopefully can save the money for it later this year, I will most def be changing to led lights for the rear lights and turn signals, though the pop ups, imma hope I can just change to an LED bulb, for the AC, since it’s a project car, imma probably put an electric AC if I can, and just get a better alternator, and also move the battery to the rear of course
Iove my poly motor and diff mounts. Probably going to try stiffer duro next time around too for the motors (innovate brand)
Good video
What kind of Roll bar do you have, and what kind of stereo? Have been trying to find a half decent of both for my Miata 🙏🏻 links?!
It’s a Boss Frog double diagonal clear view with harness bar, the radio is a 7012B, it’s a cheap unit but it works decent especially for the price. Boss frog went out of business unfortunately but if you search 7012B the radio will come up. Good luck!
It looks like you've got NB wheels on yours, correct? If that's what I'm seeing, can you tell me if there are any downsides? I'm asking because I want to put those NB wheels on my NA. Thanks!
I want to put fender flares and wide bodies on now to get that hovercraft look lol
Install some fans on the back too!
Did you get a custom fabricated roll bar, or a bolt in one, if so what is it and where did you get it? Wanting one that is good
I bought it pre made, it’s a boss frog roll bar. They unfortunately went out of business a while ago
Even a little plastic box around the filter with a pipe going to fresh air will do. Can even wrap in carbon fibre vinyl so looks the part yet cheap as :)
Absolutely! When done right you can make a good cold air intake.. this eBay kit just isn’t it
Good tips.. I am searching for a good NA.. and dont want a bunch of crap on it. DMAX
Cool!!!! Where did you get the centre console rest from? :-) me likey
I custom made it myself, do you make them?
@@CashedOutCars Awesome, looks nice and comfortable, if your stuck in traffic :;-)
In addition, deleting the undertray will cause cooling issues during spirited driving.
That’s a good point. I will say that mines been off for years and I’ve done lots of spirited driving and all day autocross days (continues lapping) and haven’t had a problem, but it certainly can cause problems
I got the yonakas in box waiting to install, and your car height looks exactly what I want. What settings do you run?
I always heard offhand the style bars would never help, never seen or knew that could just horrifyingly fold forward like that
I’ve got a full review video up on my channel that will show you exactly how I have em! Yeah style bars trick a lot of people into the illusion of safety
Understand the style bar has no safety value. But just to be clear, are you saying that the are actually dangerous?
@@jimvorndran9438 it's a zany action, a crazy contraption, the fun is catching it's mousetrap
decry the style bar before it crushes any other mice, so don't get caught yourself
It's a mouse trap! from milton bradley.
People say the Nc looks like a boat then add fender flares. Hahaha. I put on the ac with the top down. Good list.
Well I’m guilty of the sleepy eye mod but my car doesn’t look stock at all. I used to have the hot air intake have since put the stock box back in. I have heavy knock off wheels (xxr) and cheap tires ( I was broke and needed tires at the time) if you look in my channel you will see the car that’s guilty of this stuff. I’m currently waiting on my wide body but do plan to actually make the wheels fit and later down the line get wide wheels to fit in it for a meaty look.
4:31 Mine was stock lol. Gonna replace it tho.
I’ve got no issues with my race motor mounts they were awful at 1st but after like 100 miles it feels no different than stock mounts
Hey, where did you get those sticker badges? I like how they look and I don't have any badges on mine currently haha
I made them custom! If you’d want some made email me at cashedoutcars@gmail.com and we can work something out!
th-cam.com/video/J8TbvdIvmc8/w-d-xo.html
Love this chanel , what radio screen you use ?
Thanks! Here’s the link, it’s a cheaper, lower end unit. I have a full review of it on my channel as well as an install video if you’re interested! amzn.to/2XOW9uT
Me, who doesn’t own a miata:
*hehe* *boi*
Correct me if I'm wrong, but for the intake wouldn't you avoid the issue of sucking in hot air if you install a heat shield between the headers and the intake?
A heat shield certainly would help! If you’re sucking in colder air than stock there will be a benefit, lots of people slap on this style filter and think they’ll make more power but it’s not really true, especially when it’s next to hot headers like this
Looks like I'm only guilty of having a style bar, but in my defense it was installed by one of previous owners, so I consider myself sin-free!
Nice! Definitely consider a true roll bar or removing the style bar, it should keep you safer!
@@CashedOutCars would you recommend any roll bars that look like the style bar? I like the aesthetic u.u
Mazda competition motor mounts are sick. Not bad at all and feel Great.
Those are a good compromise between stock and a poly mount, that’s for sure!
Mind telling us where you got your center console cover from? :)
Of course! I made it myself, check out my video on Miata interior mods, I go over it a bit more in detail!
How do you fix the cone intake situation?
You put in the intake wrong, you need to reroute it and face it forward. Money Pit over on Donut Media has a great example on how to properly do that.
Also most of these "regrets" are very useful mods to the car and a Miata is best in curvy roads imo. So stiff suspension, upgraded engine mounts, wide tires/ wheels are perfect mods.
That’s how this kit is, which is what makes it ineffective. Yes, performance mods are great, when done right. Heavy wheels and tires, improper spring rates that don’t match damping, and stuff like that ruins the experience and performance of the car.
m8 I am deleting my A/C, but only because the new engine I'm going to swap in doesn't have an A/C compressor.
also going to delete my power steering so I don't have to go to the gym as much
For a lot of people an AC delete makes sense, I almost took mine out to make room for my turbo stuff. I have my power steering deleted, it certainly makes you work for it a bit!
I wasn't on this list but now I've got no choice but to remove my AC after a front end disagreement with a fox 🙈
That's too bad, poor fox, poor Miata, and poor you! At least you'll have the free weight reduction!
@@CashedOutCars haha thanks sir. It's gutting but at the same time adds to the ongoing story 😁
idc if the cold air intake is actually a hot air intake
it sounds fucking awesome
and when you are driving and or have a heat shield cold air is coming into the engine bay so its not that bad
6:13 my exhaust has a massive drone and i love it. its just boring without a drone
Where do you get that trunk with tiny lip
Lmao hot air intake
As for number 10, the reason people do that is because it's a pain in the a$$ to find decent wider wheels in 4x100. You can find 15x10 wheels. But then your next problem is finding tires to fit that. I know this because I've been doing research for the past few months on this. However if you have any tire suggestions for that size, please lmk.
I agree on the 14 inchers. Take a look at Kosei, Konig etc for a good selection of less wise 15s! That said, a wider 15 with a good tire can surprisingly fit well with a stock or near stock body and grip like crazy
I’m guilty of having static led headlights... and soon to be guilty of ac delete(it’s broken)
AC delete if it’s broken is also different. That’s just extra weight you’re dragging around for no good reason, it’s good to get rid of it then!
My AC doesn’t work. I would prefer to have it though. 1992- is there an affordable upgrade? I have been told the frion (?) can’t be recharged.
I like the lazy eyes.....chill bro.
hot air intake made my mx5 sound twice as good, no regrets
Hahaha that's hot I felt when I had mine too... Now I have a turbo
Do you have a link for those coil overs?
amzn.to/2XrwBTc This is the set on the car, it looks like they're out of stock of now though. Here's what looks like an alternative set, but they appear to be stiffer so you may not want to daily them! amzn.to/3quuZ8r
This goes for any car, but quick release steering wheels, tsurikawas and flashing brake lights
I agree with 95% of the list. However, as someone who lives in a temperate/cold environment, I am biased towards an AC delete, especially if your car is a soft top. It not only acts as weight reduction and gets rid of an accessory pulley on your engine that saps power, the real gain is in engine temps. Cooling is the Achilles heel of Miata performance driving, and even without a reroute, getting rid of that AC condenser in front of the radiator will do wonders for an overheating engine. That’s my two cents, it’s a free mod, and reversible if you’re careful while removing and can afford some spare freon ¯\_(ツ)_/¯
That’s a good point, and I am considering doing it on my car since it’s a weekend toy and cruiser, and not my daily driver. For MOST Miata owners though, an AC delete probably isn’t worth it
Never let this man cook again.
It’s time for a new hvac panel in there
Where did you get the roll bar cover?
It was custom made by my dad who does upholstery!
Any recommendations for good tires ?
^^ just for casual driving
For daily driving a good all season like this would be fine! ebay.us/JqOWHx I'm a big fan of the slightly grippier tires on these cars though
I might as well do an ac delete because it doesn’t work anyway
Joke's on you! I don't have any of these mods 'cause I can't afford a Miata!
Jokes on me at this point too because I want another and prices are insane😂
Well, when I can barely see the road when I drive with stock pop ups, sleepy eye low profile lights are kinda a need
That’s an interesting point that I hadn’t considered. The “sleepy eye” mod that a lot of people do is make the stock lights pop half way up, meaning your lights wouldn’t shine in the right direction. Low profile lights here certainly would have an advantage!
@@CashedOutCars Oh gotcha. Sorry, I use sleepy eye and the low profile headlights mod kinda as interchangeable terms. But yeah on mone I got the jass low profiles because at night it was kinda difficult to see the road. 6'1 with stocks seats lol
Yeah they’re definitely used kind of interchangeably. That must make a nice difference at night! Function over form all day too. Enjoy your car!
#11 Duplex exhausts
Ouch, you got me :(
Probably about to get a miata with 60k mileage。What should i do to it?
Change your fluids, check your radiator, and send it!
i’m not guilty of any of that but i bought my miata without working ac so it’s been a very very hot summer daily🥴
Same boat, this FL heat sucks
didn’t mention aftermarket steering wheels are dangerous bc you delete your airbag and you’ll need that more than a roll bar since took over crashes are rare compared to head on collisions and mild fender benders
Certainly, but that one is self explanatory. People think “style bars” are real roll bars and that they’ll protect them. Removing a wheel with an airbag is an obvious safety risk
I probably will put fake roll bars on my 92 MX. WAY easier to install and I don’t plan on rolling over my car. Now, if I do, it is probably part of the master plan.
ive donee none of that list which is nice lol
respect
what was your miatas mileage at when u got it?
This one I got at just over 200k, I also have an NB that I picked up at 67k
@@CashedOutCars oh damn nice i was trying to find the video of where you said how much miles were on it but i couldnt find it
Miata owner dreaming of mr2
What size are your tires
195/60R14, they’re meaty and slightly wider than stock but nothing crazy
Hi, whats your radio?
It’s an extremely cheap unit, I have some videos of it on my channel. Full review to come soon!
CashedOutCars ok ill go watch the video thanks
#11 putting white tires sticker on ... LOL
I made this video to get comments for the algorithm, it works ;) no stickers on my car though
Are *Enkei RPF1's* too *heavy*?
Hyped, yes and with hood reason, but heavy, absolutely not
When I get a mineta MX-5 1990 I'm gonna make it electric and have butterfly wing doors
Only one that I’m guilty of is AC delete.... btw it’s 91 degrees outside.......
I’ve been running with AC with no belt to drive it for the last few months.. and that’s an AC delete with out any of the benefits because I got lazy🤪
damn bro called me out on my $600 low profile headlights on my stock miata, and clear LED tailights, atleast they aint ebay tho lmao
The low pros are growing on me since I made this video! I still love a happy NA though
@@CashedOutCars yeah I much prefer the stock headlights for looks, but the low pros have to grow on you, didnt like them at first myself but with the insane lighting they put out really can’t hate them, I just don’t like having them popped up while driving in day, looks dumb, but can still wink at people!
My car has a mouse trap role bar but it’s wielded in
Hmm that's interesting, That doesn't really make me trust it more. They're usually pretty thin metal
I think I'm guilty of multiple...
I disagree about the motor mounts. My car feel much more torquey and more responsive. It doesn’t add any roughness I my opinion.