I forgot to mention regarding the fuel tank, all you need to removed is the two rubber hoses, you need the fuel line and electrical cable to startup your engine, Tips - less fuel much easier to LIFT the Tank, and after my Syncro, I did clean the Air filter box check my Video on that one, I also remove the FUEL TANK and clean the surroundings of my engine and inner frame, so if notice the video while installing back the parts the Fuel Line and Electrical not installed, hope this explanation clear might clear your question regarding on that matter. Thank you for your time and be safe always..
This operation must always be carried out after cleaning the throttle bodies or can it be cleaned without doing it? I have done the cleaning but now I have the high idle and the bike is not good should I synchronize?
I get on YT 4-5 nights/week and am still shocked at how much great content is out there I haven't come across like your channel. Great video. Subbed and enjoying the other stuff you've got done.
Oo bro, titipid sa gas at smooth ang idle, yon lang ingat baka mag wheelie ahaha lakas throttle response, gawin natin yan hiramin ko ulit sa kapit bahay kong malupet ahaha..
Maganda talaga ikaw na gumawa sa mc mo kasi baka matagal yung schedule ng gawa sa inyo kaya maganda ikaw na yung babanat atlis alam mo yung sakit ng mc mo pag nagkaproblema. Galing ng pagbagkas mo sa flarings mabilis lang basta may gamit..
Good day bossing, same lang naman ng throttle body sa mt09 yn no? request naman ako diy na pag remove ng throttle body gusto ko kasi ako na maglinis ng throttle body at fi cleaning ng mt09 ko..
How do you know the default position for the master? I understand that you adjust the others according to the master, but what is the correct master position?
I have some important questions. I just ordered one of these and I want to make sure that I don't suck any mercury back into my bike so is there a certain way I should rev it? Quick little blips or should I slowly ease into it? Also how high are you revving the engine? What RPMs?
Hi Eric, don't worry it will not suck any mercury as it always blow air from the vacuum valve I don't know why it is vacuum lol and about the revs a quick blips will do it is just to see after the blips where it settled, anyways thanks for your comment and have a great one.
Yes Brother, you have to rev a little bit to make sure that the sync level sets correctly before adjusting the screws, the once you adjusted try another rev just to make sure it's final level is the same..
Hi there, sorry for the super late response, rough idle, when or after synchronization engine is smooth and very responsive, happy new year and ride safe always!
I forgot to mention regarding the fuel tank, all you need to removed is the two rubber hoses, you need the fuel line and electrical cable to startup your engine, Tips - less fuel much easier to LIFT the Tank, and after my Syncro, I did clean the Air filter box check my Video on that one, I also remove the FUEL TANK and clean the surroundings of my engine and inner frame, so if notice the video while installing back the parts the Fuel Line and Electrical not installed, hope this explanation clear might clear your question regarding on that matter. Thank you for your time and be safe always..
@Jorge Roberto thank you, be safe always
This operation must always be carried out after cleaning the throttle bodies or can it be cleaned without doing it? I have done the cleaning but now I have the high idle and the bike is not good should I synchronize?
I get on YT 4-5 nights/week and am still shocked at how much great content is out there I haven't come across like your channel. Great video. Subbed and enjoying the other stuff you've got done.
I'm sorry for so so late response my friend, thank you very much happy new year!!!
done, another great tutorial for us sir. really so helpful and thank you so much.
Thank you very much brod, be safe and have a great one..
Well done bro. Be safe out there.
Thank you very much bro, you as well stay safe and have a great one..
Muito boa sua explicação
Thank you very much bro! Be safe always..
Perfect 👌🏼⭐️⭐️⭐️⭐️⭐️👏🏼
Thanks my friend, ride safe always
Yun oh... another great tutorial bro.., I need that also this summer.. malamang di na rin sync yung sa aking bike...
Oo bro, titipid sa gas at smooth ang idle, yon lang ingat baka mag wheelie ahaha lakas throttle response, gawin natin yan hiramin ko ulit sa kapit bahay kong malupet ahaha..
@@BeRideBack oo pre bigyan na lang natin ng hopia kapitbahay mo para madaling mapapayag 😁
@@KJMotoPh ahaha oo ba pre, sama ko nga minsan sa ride, bago ulit motor nya eh, hehe
Why do you have a cup holder on your bikes gas tank filler? Is it from weathertech?
Maganda talaga ikaw na gumawa sa mc mo kasi baka matagal yung schedule ng gawa sa inyo kaya maganda ikaw na yung babanat atlis alam mo yung sakit ng mc mo pag nagkaproblema. Galing ng pagbagkas mo sa flarings mabilis lang basta may gamit..
Maraming salamat kabayan, malaking savings din pag ikaw na ang gagawa may natutunan pa, Maraming salamat ulit and be safe lagi kabayan..
Good day bossing, same lang naman ng throttle body sa mt09 yn no? request naman ako diy na pag remove ng throttle body gusto ko kasi ako na maglinis ng throttle body at fi cleaning ng mt09 ko..
🤗 👍 ☝️ 😎 Nice one KaMotoFriends More power and Thanks for sharing 🤗 Stay safe 😷
Maraming salamat KaMotoFriend, be safe always 🤗👍
Nose Bleed To The Max 😂😂😂😂😂
Hehehe inabot na ng kalahating arang ang diy kakaisip mga sasabihin KaMotoFriends 😅😁be safe always
How do you know the default position for the master? I understand that you adjust the others according to the master, but what is the correct master position?
Setting comes from the Factory..and may vary from bike to bike...just dont touch the master ..if you do ..good luck
I have some important questions. I just ordered one of these and I want to make sure that I don't suck any mercury back into my bike so is there a certain way I should rev it? Quick little blips or should I slowly ease into it? Also how high are you revving the engine? What RPMs?
Hi Eric, don't worry it will not suck any mercury as it always blow air from the vacuum valve I don't know why it is vacuum lol and about the revs a quick blips will do it is just to see after the blips where it settled, anyways thanks for your comment and have a great one.
How do I know which is the master on my bike ?
Hi Joaquin, there is always a marking for the master or some had a different screw color, be safe always
*mabusisi naman pala yan sir dre kababayan , aheheh*
Maraming salamat bro dre kababayan, medyo ang hirap kasi mag pa sched ng service kaya ako na gumawa hehe, be safe lagi dre kababayan
Brother, if you set the air screw of the throttle, then the rपm will also change??
Rpm*
Yes Brother, you have to rev a little bit to make sure that the sync level sets correctly before adjusting the screws, the once you adjusted try another rev just to make sure it's final level is the same..
By the way sorry for the late response, enjoy the ride and safe always.
@@BeRideBack it's ok thanks
What are the symptoms if that’s not regulated? Were the bike jerked a bit when you’ve been riding it before fix?
Hi there, sorry for the super late response, rough idle, when or after synchronization engine is smooth and very responsive, happy new year and ride safe always!
@@BeRideBack thanks, happy new years and be safe there as well
Dami muna ngwa jan sa bike mo sir ah
Maraming salamat sir, hirap kasi pa sched dito sir at matagal kaya ako na gumawa hehe, be safe lagi..
kino
Trying to copy yammie noon on the music