GOOOOOD TIP on the different impeller. I'm about to tackle this. I wouldn't have put the new style on, without spending time calling Cummins to see if it would fit which would have taken a couple of hours I'm sure. BTW, I know Snap-On is king, there's nothing better yada yada but a Pittsburg 1/2" and 3/8" drive ratchet would cost about $30 combined at HF and I've not broken either one yet. just a suggestion. Great video!
GREAT VIDEO DIRTY DIESEL GREETINGS FROM THE UNITED STATES VIRGIN ISLANDS IN THE CARRIBBEAN US TERRITORY ST THOMAS I AM NEW TO YOUR CHANNEL I AM A JOURNEYMAN HEAVY EQUIPMENT MECHANIC MY DAD WAS A DIESEL TECHNICIAN HE TAUGHT ME ABOUT HEAVY DUTY TRUCKS AND EARTH MOVING EQUIPMENT REPAIR BEFORE HE DIED I AM PERSUING A CAREER IN DIESEL MECHANICS AND WILL GET MY CDL TO DRIVE TRACTOR TRAILERS AND BECOME CUMMINS CERTIFIED DIESEL TECHNICIAN THANKS FOR THE STEP BY STEP VIDEO I LIKE CUMMINS ENGINES BE BLESSED AND ALL THE BEST FOR 2024
Great video dirty diesel greetings from the United States Virgin islands in st.thomas in the carribbean Us territory I am new to your channel and I am a journeyman heavy equipment mechanic I have nine years of experience in heavy duty trucks and earthmoving equipment repairs my dad was a diesel mechanic he taught me most of what I know so far he passed away last year and I am going to be certified soon and get my CDL your videos are very educational and interesting and I am learning more about these Cummins isx day by day thanks for the great content God bless you and keep the videos coming
@@xrebirthx4393 the ISX or X15 have a different set up. If the water pump has not been updated you might have to replace the entire thing as a complete assembly. Check with Cummins by using your engine serial number. You might be able to just replace the front part of the water pump. The blade on the back will determine if it is interchangeable
The pipe that conjoins the water pump to the egr cooler will come out without removing the water pump and/or housing. Just have to slide it all the way forward/into the pump housing so that it comes all the way out of the cooler, then pull out, toward the steer tire. It’ll come out.
Yesss I have finally discovered an all Cummins channel!!! Can you do a video on which oil brands is the best for Cummins isx... Delo, Rotella, Valvoline, Schaffers, amsoil VS each other and temp test also... Not even on video on the tube showing support for heavy diesel motors only pick up trucks
@bigrigfix I drove from Grandview to Brigham City and the coolant is 1/2 way min to full...guess it's not that bad.... climbed cabbage did not overheat...maybe lucky I guess
Thanks a lot The updated impella sucks, no fit into original housing. Because Cummins stopped selling original set but only updated with bigger impalla that does not fit in original housing.
So it's a freighliner cascadia volvo? 😂 Good video, thanks for the detailed instructions. One question though, the grease you use was it petroleum based? I ask because it can be bad for o-rings.
No you don’t all the time . The one I did was the old model and Cummins sales the update water pump . The update water pump won’t fix in the old housing just remove and match up.
Just my opinion go ahead and paint that sh!t I do a few per month I have one that wasn’t painted and I’m having to used a sledge hammer to get the old pump out of the mount it sucks
GOOOOOD TIP on the different impeller. I'm about to tackle this. I wouldn't have put the new style on, without spending time calling Cummins to see if it would fit which would have taken a couple of hours I'm sure. BTW, I know Snap-On is king, there's nothing better yada yada but a Pittsburg 1/2" and 3/8" drive ratchet would cost about $30 combined at HF and I've not broken either one yet. just a suggestion. Great video!
GREAT VIDEO DIRTY DIESEL GREETINGS FROM THE UNITED STATES VIRGIN ISLANDS IN THE CARRIBBEAN US TERRITORY ST THOMAS I AM NEW TO YOUR CHANNEL I AM A JOURNEYMAN HEAVY EQUIPMENT MECHANIC MY DAD WAS A DIESEL TECHNICIAN HE TAUGHT ME ABOUT HEAVY DUTY TRUCKS AND EARTH MOVING EQUIPMENT REPAIR BEFORE HE DIED I AM PERSUING A CAREER IN DIESEL MECHANICS AND WILL GET MY CDL TO DRIVE TRACTOR TRAILERS AND BECOME CUMMINS CERTIFIED DIESEL TECHNICIAN THANKS FOR THE STEP BY STEP VIDEO I LIKE CUMMINS ENGINES BE BLESSED AND ALL THE BEST FOR 2024
Great video dirty diesel greetings from the United States Virgin islands in st.thomas in the carribbean Us territory I am new to your channel and I am a journeyman heavy equipment mechanic I have nine years of experience in heavy duty trucks and earthmoving equipment repairs my dad was a diesel mechanic he taught me most of what I know so far he passed away last year and I am going to be certified soon and get my CDL your videos are very educational and interesting and I am learning more about these Cummins isx day by day thanks for the great content God bless you and keep the videos coming
Thanks for watching and God BLess.
Great video, I just did a job like this on a 2018 KW with the ISX15 and had no issues. Thanks again.
Hello, Pedro Fuentes. I have a 2018 international with a cummins x15 engine. Did you have to replace the water pump housing or just the water pump?
@@xrebirthx4393 the ISX or X15 have a different set up. If the water pump has not been updated you might have to replace the entire thing as a complete assembly. Check with Cummins by using your engine serial number. You might be able to just replace the front part of the water pump. The blade on the back will determine if it is interchangeable
@@CarlosDieselElectric Thank You!
The pipe that conjoins the water pump to the egr cooler will come out without removing the water pump and/or housing. Just have to slide it all the way forward/into the pump housing so that it comes all the way out of the cooler, then pull out, toward the steer tire. It’ll come out.
Finally, i have been looking for a good channel to help with this fix! Great job will subscribe
Can you tell us the seal part numbers...
Would you happen to know the p/n# for the o ring seal @ 11:00 ?
Sorry I don’t.
4059172
Yesss I have finally discovered an all Cummins channel!!! Can you do a video on which oil brands is the best for Cummins isx... Delo, Rotella, Valvoline, Schaffers, amsoil VS each other and temp test also... Not even on video on the tube showing support for heavy diesel motors only pick up trucks
Sure.
Great video thank you,very helpful God Bless you man happy new year to you and your family.
Do you always have to change the water pump housing? Or can you just change the water pump?
Que le haces a tus cascos viejos??
Can you give me number of seals behind the housing and seal of egr tube.Thanks
How long can you go with it leaking...Im in Washington trying to go to the Bronx 😮😮😮😮
Just how bad is the leak .
@bigrigfix I drove from Grandview to Brigham City and the coolant is 1/2 way min to full...guess it's not that bad.... climbed cabbage did not overheat...maybe lucky I guess
Thanks a lot
The updated impella sucks, no fit into original housing.
Because Cummins stopped selling original set but only updated with bigger impalla that does not fit in original housing.
im going to be doing one of these tomorrow. thank you
Why does the tensioner need to come off?
Torque specs by chance please and thank you🙏
Beautiful video Thank you brothers
Good job, great video. Stay Blessed 👍
Thanks for watching.
So it's a freighliner cascadia volvo? 😂
Good video, thanks for the detailed instructions. One question though, the grease you use was it petroleum based? I ask because it can be bad for o-rings.
Thank you, first thing I’m changing
Awesome video thanks for the step by step!
No you don’t all the time . The one I did was the old model and Cummins sales the update water pump . The update water pump won’t fix in the old housing just remove and match up.
Can I just replace the waterpump instead or replacing both pump and housing?
Of**
Thanks that help a lot.
Thanks for watching.
Thank for the information. It saved the day.
How much does a cost on labor be for the water pump job
?
How long was this job? It looks fairly simple to do. Thanks.
4hrs
Are they repairable ?
I'm not sure .
Headlined Cascadia. Then we see it's a Volvo.
You work in Paccar ingenes
No for myself.
Mine is leaking coolant at the bottom of the water pump. Do i have to replace the whole thing or just the orings ?
Depends is it leaking from the Weep of the water pump or the or the outer seal.if otter seal leak just the seal.
Thanks please like and subscribe.
i work for the company that manufactures and assembles these pumps TBKA
Thanks
The tools are in the description.
No paint need .
Sure looks like a pain in the ass to change that. Do those parts need to be painted to keep them from rusting or will they be ok?
I just installed on water pump assembly today using this video and no issues. No paint needed.
Just my opinion go ahead and paint that sh!t I do a few per month I have one that wasn’t painted and I’m having to used a sledge hammer to get the old pump out of the mount it sucks
You can see the drip😂😂😂😂
Yes you can.
Niceeee
Thanks for watching you please like and subscribe.
You know if the pump. Broke can. Pass coolant to the oil
No head gasket or pistons liners.
@@bigrigfix i appreciate it
👍🏾👍🏾👍🏾👍🏾
Thanks for watching.