Vauxhall / Opel Astra K rear outer light connection repair

แชร์
ฝัง
  • เผยแพร่เมื่อ 1 ต.ค. 2024
  • Short: • Vauxhall / Opel Astra ...
    In this video, I replace the connection lead for the outer light of my Vauxhall / Opel Astra K. The light was dim and flickering. This is a common fault on Astra K models but is quite straight forward to fix.
    Replacement connector: amzn.to/3xUaOJC
    Solder seal wire connectors: amzn.to/4bllboa
    Music I Use: www.bensound.c...
    License code: Q36OCBNAOTQKYTVK
    Camera: Sony A7IV
    Lens: Tamron 28-200mm F2.8
    Tripod: Heipi 3-in-1 travel tripod
    Edited on Adobe Premier Pro

ความคิดเห็น • 14

  • @zakplayyy
    @zakplayyy 5 หลายเดือนก่อน +2

    This is great ! Had the same issue with rusting (or burning) in the connector. Is using the heat gun with the solder connectors the best option? I've seen you can solder directly or crimp the wires together. I imagien heat gun approach is probably the most secure and watertight method. Though i imagine doing a similar repair on others wires in the car using a heatgun could be difficult depending on where the wire is.

    • @BeefWadStudio
      @BeefWadStudio  5 หลายเดือนก่อน +3

      Thanks @zakplayyy and sorry to see you have had the same problem as me.
      To be honest it's the first time I've used these heatgun wire connectors. I am really impressed and the connection is strong, especially for this purpose as there are no moving parts/stretching of the wire. It feels strong as the plastics seem to bind together making that water tight seal. But it keeps its flexibility. In hindsight I probably didn't need to wrap it all up with electrical tape but as this was my first experience with them I played it safe. It was also very fast to do, much quicker than getting all the soldering kit out! Most helpful thing is that you don't need 10 pairs of hands trying to hold the wires still and solder at the same time.
      I've just used them to fix some solar string lights in my garden after a fox decided to have a chew. Took me a couple of minutes and most of that was unravelling the extension cord for the heatgun. 😅
      As for my car lights, I made this video a month ago. I've been checking regularly after driving (which have included hitting some large pot holes 😮) and I'm happy to report all is still working.

    • @zakplayyy
      @zakplayyy 5 หลายเดือนก่อน +1

      Good to hear it is all still working, even with the potholes we never seem able to escape ! Will give the heat shrinks a go the next time i have a similar job

  • @liamhalsey1378
    @liamhalsey1378 5 หลายเดือนก่อน +2

    Might be stupid question but will the battery need to be disconnected while working on?

    • @BeefWadStudio
      @BeefWadStudio  5 หลายเดือนก่อน +3

      No question is a silly one and it is a good point 😉
      I did not disconnect the battery, but I did make sure the lights were off (set to auto with the key out of the ignition)
      I was also careful not to short-circuit any of the wires by only stripping one wire back at a time. In theory, shorting shouldn't be an issue as there is no current with the lights off, but I also wouldn't want to test that theory 😅
      Pop your car keys on the side (not in a pocket), as pressing the remote unlock/lock by accident will cause the indicators to flash.
      Good luck on fixing your lights 👍🏻

  • @olivertinsle9548
    @olivertinsle9548 2 หลายเดือนก่อน +1

    thankyou this helped solve my issue i followed the steps you did so far so good been a week or so and it’s still going strong thanks

    • @BeefWadStudio
      @BeefWadStudio  2 หลายเดือนก่อน

      I'm glad this has helped you! It's been over 3 months for me and the light is working perfectly on my car!

  • @DoqiReborn
    @DoqiReborn หลายเดือนก่อน +1

    I can not take my plug out no matter how hard I try :D Any tips ?

    • @BeefWadStudio
      @BeefWadStudio  หลายเดือนก่อน +1

      Can I confirm you have lifted the red tab such as at 2:42
      Under my talking at 2:47 you hear a click as the red tab is lifted to unlock the connection.

    • @DoqiReborn
      @DoqiReborn หลายเดือนก่อน +1

      @@BeefWadStudio yes I did but I did not come off. I feel like it has been glued there somehow... I see you also used screwdriver to lift the plug but I did not want to break it.

    • @BeefWadStudio
      @BeefWadStudio  หลายเดือนก่อน +1

      @DoqiReborn It is on tight. (A good thing in many ways as it prevents a loose connection) but I managed to get a thin, flat-head screwdriver between the plastic to prize them apart.

    • @BeefWadStudio
      @BeefWadStudio  หลายเดือนก่อน

      ​@@DoqiReborn Have you had any luck?

    • @DoqiReborn
      @DoqiReborn หลายเดือนก่อน

      @@BeefWadStudio I was told it was not the plug but the whole unit needs changing, so I will have to take it to a garage anyways. Thanks for checking.

  • @yessir1076
    @yessir1076 หลายเดือนก่อน

    Maybe dumb question, but I know absolutely nothing about cars😅
    😅 does vauxhall astra 2016 has one bulb for both tail light and break light?
    Also I recently discovered that my left rear tail light and also break light is not working. If it's not a burnt bulb, what could it be? And how can I check if there's something else wrong with my tail/break light?
    I'm really sorry for those question but I'm clueless 😂