Hope the young lass recovers quickly...my youngest went through a few broken bones as well. You are really getting the production side of things working well for a one man show.
Great to see you again Jim, sorry to hear about your youngest. Just recovering myself after a handful of heart attacks the last two months! Just chilling out now. All the best Graham🇬🇧🇬🇧👍
So good to see you. Your little one is tough as nails and will pursue. Glad the new buzz box is working out. I hope the orders keep coming in and you can keep up. Grind away my friend, now is your time!! -Will
So good to see you ole boy! Sorry to hear about the little one. Praying for good healing and speedy recovery. Hope all well up there with everything else going on in this crazy a$$ world. Stay safe brother. We'll see you on the next one my friend.
Hi Jim, Two vids in a row, who hoo! Sorry to hear the little supervisor broke her arm. Prayers will go out for her to heal quickly and correctly. As always God bless and take care from your long-time California subscriber. Good to see you again buddy!
@TheTradesmanChannel I'm guessing Wyatt was a bit older than that when I started watching you. I stumbled across an old video of you and Wyatt promoting other channels in 2017. He was a smarty pants back then. My grandson turned 2 a little more than a month ago. Thank you very much for taking time to share with us all these years buddy!!
top job Jim , speedy recovery to the little one , and just a thought to ya mate raise the anvil 2 - 3 inches , belive me when i say you thank me when you get to my age ,,,, your back will will anyway ,,,,,, try to work with your back as straight as posible , just letting ya know from my own crook back oh yes i'll be 60 on tuesday
I use their stuff quite a bit, especially on my 12" disc grinder. Very good stuff bit I've noticed with cutoff wheels and flap discs on this stuff it doesn't make much difference.
2 in 2 days ......... Wohooo! It is good to see you hone down your production methods. Looking at your forging hammer in this one and comparing it to the Behemoth you have used in the past is interesting. Also the way you production line your items! How do you put a timeline on when you might expect a power hammer in the shop? Also, way back in the mists of time (1970's) I remember a "Buy British" campaign! That was back when we made stuff and before we just invented it and sold the idea on ;o) There used to be 2 stamps you could see on stuff. One was a "Kitemark" that signified it had passed the relevant safety regs (yes we did have them even back then) and another that signified UK origin! ....... We don't see much of that one any more, sadly! Keep the quality/price balance right and you will always have a good customer base ....... and those customers will sell your goods for you by word of mouth!
Hello Dave. The time line is based on current sales trends, not really taking into account for growth. I pretty much have to be at a point where it just makes sense to buy one from a business standpoint. As for the hammer, I'm finding that the one I made is a really good balance between weight and control and I'm able to move more metal with it.
Sorry to here about your youngest! Broken bones suck! Getting caught up on your content! I'll be picking up one of your chisels soon! Got a little something un the works!
Hope the young lass recovers quickly...my youngest went through a few broken bones as well. You are really getting the production side of things working well for a one man show.
Glad to see you again. Prayers for the little one, some of us have watched her grow up. See you in the next one.💚💜⚒🤠
Thank you Don
Great to see you again Jim, sorry to hear about your youngest. Just recovering myself after a handful of heart attacks the last two months! Just chilling out now. All the best Graham🇬🇧🇬🇧👍
Graham I am very sorry to hear of the health issues, I hope you're doing better buddy.
@@TheTradesmanChannel thanks Jim, now have a pacemaker fitted . It’s making life a bit easier now. Just taking baby steps though.👍
Sorry to hear about the broken arm. Praying your daughter heals well with no complications.
Thanks buddy. She's being spoiled rotten right now.
So good to see you. Your little one is tough as nails and will pursue. Glad the new buzz box is working out. I hope the orders keep coming in and you can keep up. Grind away my friend, now is your time!!
-Will
I hope so buddy
Good Morning Jim!
Good morning Stu
You are the only Canadian channel i watch but i learn a lot thanks.
You insult me good sir, I live on the border in NYS. Although Canada is less than 2 miles north of me.
@@TheTradesmanChannel don't let me get your goat i am just busting your chops because you are a Yankee, but you are close.
Wow, I haven't seen you Jim in months, TH-cam has finally sent me your videos
To be honest, I've been so busy that I have not put a video put in awhile.
Hi Prof Great to see you, I hope the Little one mends OK. You All take care 👍
Hello Doug. She'll be OK but She'll be hurting for a little bit.
So good to see you ole boy! Sorry to hear about the little one. Praying for good healing and speedy recovery. Hope all well up there with everything else going on in this crazy a$$ world. Stay safe brother. We'll see you on the next one my friend.
Hey buddy! Damn good to hear from you.
Hello from North Carolina..
glad you're still videoing Jim hope the kid is well see you next one
Thank you Howard. They reset the break today, thankfully they put her under for it.
I keep you on my short list, brother.... I've generally kept up with you for a while. It has been my honor....
Thank you very much.
Like you said two days in a row crazy 😂 great honest videos much appreciated 🇦🇺🇦🇺🇦🇺
Hello Alex. You'll be shocked to see another one in about an hour and twenty minutes.
Hi Jim, Two vids in a row, who hoo! Sorry to hear the little supervisor broke her arm. Prayers will go out for her to heal quickly and correctly. As always God bless and take care from your long-time California subscriber. Good to see you again buddy!
Good morning Elliot. The little one is getting spoiled.
@@TheTradesmanChannel If I can ask, how old is she now?
@elliotazus6258 she is 7 now. Getting big fast.
@TheTradesmanChannel I'm guessing Wyatt was a bit older than that when I started watching you. I stumbled across an old video of you and Wyatt promoting other channels in 2017. He was a smarty pants back then. My grandson turned 2 a little more than a month ago. Thank you very much for taking time to share with us all these years buddy!!
He turned 16 yesterday, he is the same size as me now.
top job Jim , speedy recovery to the little one , and just a thought to ya mate raise the anvil 2 - 3 inches , belive me when i say you thank me when you get to my age ,,,, your back will will anyway ,,,,,, try to work with your back as straight as posible , just letting ya know from my own crook back oh yes i'll be 60 on tuesday
Tell her we all said "get well soon".
Thank you Jim, I will.
Benchmark adbravise man is the best flap disk and cutoff wheels I've ever used and great price, check'um out, great video..
I use their stuff quite a bit, especially on my 12" disc grinder. Very good stuff bit I've noticed with cutoff wheels and flap discs on this stuff it doesn't make much difference.
2 in 2 days ......... Wohooo!
It is good to see you hone down your production methods. Looking at your forging hammer in this one and comparing it to the Behemoth you have used in the past is interesting. Also the way you production line your items!
How do you put a timeline on when you might expect a power hammer in the shop?
Also, way back in the mists of time (1970's) I remember a "Buy British" campaign! That was back when we made stuff and before we just invented it and sold the idea on ;o)
There used to be 2 stamps you could see on stuff. One was a "Kitemark" that signified it had passed the relevant safety regs (yes we did have them even back then) and another that signified UK origin! ....... We don't see much of that one any more, sadly!
Keep the quality/price balance right and you will always have a good customer base ....... and those customers will sell your goods for you by word of mouth!
Hello Dave. The time line is based on current sales trends, not really taking into account for growth. I pretty much have to be at a point where it just makes sense to buy one from a business standpoint. As for the hammer,
I'm finding that the one I made is a really good balance between weight and control and I'm able to move more metal with it.
@@TheTradesmanChannel That, my friend is the secret to life! ...... It's all in the balance!
@totherarf yest it is
Sorry to here about your youngest! Broken bones suck! Getting caught up on your content! I'll be picking up one of your chisels soon! Got a little something un the works!
Hey buddy. I'm working on a batch of 20 right now, 1" to 2". Hope you're doing well.
@@TheTradesmanChannel Ben doing great!