Will removing charcoal canister/other emission canister and that flapper throw a check engine light? I have block off plate kit and healtech pair system eliminator plug kit
After you remove the charcoal box and other items what do you do about the plug in wiring that's now no longer needed and will the check engine light come on due to not being plugged up?
Can you make the same hp on a 2012 zx10r? Would love to know the secret sauce and other mods I can do to my 2012 as I'm from Australia and can't come to your workshop
I had a 13 and a 16 zx10r with basically the same mods. Besides the quicker shifter on the '16, they were pretty much the same. Both felt fast as fuck and smoked 99% of other bikes out there
I also know you stick a marble or something in one of the tubes on the left side of the tank to completely block it off and stop back pressure or something. Can't remember 100% because I did it 5 years ago but know that is 1 trick
hi mate I tried taking my nose come of today but struggled. I got side fairings of but couldn't work out the nose cone. do you happen to have a step by step video on how to do this. ? also great job mate
Awesome machine, my favorite shape. I will be putting sprint filter and titanium bits in my first gen during spring tune up. Too bad our riding season here in Canada is considerably shorter :)
Ooops, New England!!!!!!!! Still way too far to drive Why did u drop the Triple Clamps 2 inches? My two 2008 CBR 1000rr have had T clamps raised 1cm, yes I know Honda had off geometry bla bla, and still U dropped yours. Please explain
Regarding Cam Chain Adjuster, I KNEW I HEARD that DARN cam chain flapping right after cold start. I'd not put in earplugs, and heard the sound! Bike is completely stock and has 1200 miles, hence I can hear all its sounds. How much of a problem is it? Minor concern? I ride hard, but not race. Where are you located and what do u think of the 2020? Great vid, great quality, you speak well, and work so fast--heh heh!!! Please let me know, as I'm sure the CMRA tuner I've been pestering is tired of questions---"Geeez kid, are you gonna spend any $ or just keep asking questions??!!????"--- that's what he might say and still he's too nice SO FAR> Cheers and I hope this finds you well
Howdy, just heard your accent. U might be a Michigander. WAY too far to drive!! I'm in north Texas. Also, how well finished the heat wrap is!!!!!!!!!!! Super stoked to see airbox and tank so well done!! Now to finish watching and ENVY your skill
I pulled my CCT spring out and it was flattened. No more spring left in it. I stretched it out with 2 needle nose pliers. I reinstalled it and the chain noise stopped after it had a chance to push the tentionor back out. It was free and only cost me some time.
Excellent video, bro. I crashed my 2019 ZX-10R and I'll have to replace the air intake duct and solenoid valve. Why did you remove the flapper in the intake duct? I also noticed that you didn't install the vacuum chamber nor the solenoid valve. Are they not needed?
all right, can you ask me a question? the hose that leaves the engine and goes to the box that is next to the starter, what did you do with it, remove and cover the exit or keep it? I saw you took it off but I didn't see what you put in its place
Great vid what’s the point of the charcoal canister, and what’s the advantage of removing the flapper, sorry for the newbie questions, but I’ve flashed mine with auto tune Woolich, and full Akrapovic system so I’m wondering does removing those parts help much, once again I have no idea what’s up with with those parts
I noticed a tube hanging out as you were putting the front end back on. What was that tube and where did it go? After the ad you were wrenching for 4 minutes but the tube was gone. Just curious as to whether you removed it.
Omggggf man you just made my day!!! I am actually buying 2016 model soon from a friend he only has m4 shorty on it I'm definitely gonna try your mods thanks!!
Lost with me when you started talking about the plug and what you had to do with it ? Also doesn’t the cage thing keep out a lot of the big shit that could get into the air box ? One other thing the servo motor is right underneath the right fairing right ?
I've got the same exact kind of flapper on my '14 VFR 800, I've disconnected the hose which I assume would keep it always open and I've found no difference in any way. What do find is different when doing this mod?
Wrapping the airbox and tank with heatshield yip I understand and agree. But what I don't agree with is the fact that you removed the rubber lining on top of the enjin cover as that will also help as a heatshield.
I have a 2017 Ninja zx10r krt edition with a few bolton's. It made 198rwhp. I'd like to see what else you can get me. I'm not sure how to get ahold of you directly, but let me know and I'll give you my info as well.
In the video after this one you said Warren's bike was minus 1 tooth in the rear. On my 2016 ZX10R I'm running +1 in the rear 40 tooth, I don't notice much of a difference in max speed.
Been following this channel for 5+ years i still go back an watch these old videos. This channel made me pick a gen 6 zx10 over the gixer keep up the good work
Where can you order that plug for the intake?
When you find out about the plug will you send me a message
Here u go. mrpmotorsports.com/2016-kawasaki-zx10r-intake-air-diaphragm-plug/
Where can I order that plug for the intake on my 16 zx 10r
That’s ok I got the link
Is that almost .7 of a pound or is it .692oz meaning .43 of a pound the front sprocket cover ?
3:02, 10:26 🤔
can you make a video about how to build LED lighting in this kawasaki?
Will removing charcoal canister/other emission canister and that flapper throw a check engine light? I have block off plate kit and healtech pair system eliminator plug kit
I am having the same problem. What did you do on yours?
After you remove the charcoal box and other items what do you do about the plug in wiring that's now no longer needed and will the check engine light come on due to not being plugged up?
You can snip the wires, but yes if you don't have the ECU flashed or the PAIRs buddy then the FI light will come on
Feb17 2023 ✌😳😱👍 Absolu tely unreal bro
Hi
I still dont know how to set and use the launch control on this bike..could you please show me how
Hey bud! I have a 2020 zx10r, whats your secret sauce for emissions and air box?
I just heat wrapped my air box and under my gas tank. Did you also heat wrap your fuel line?
Nikdik 1000 any noticeable difference? Thinking about doing this to my gen3 zx10
Can you make the same hp on a 2012 zx10r? Would love to know the secret sauce and other mods I can do to my 2012 as I'm from Australia and can't come to your workshop
Peter Orfanidis yo did you ever find out the secret sauce? I’ve got a 2012 as well
I had a 13 and a 16 zx10r with basically the same mods. Besides the quicker shifter on the '16, they were pretty much the same. Both felt fast as fuck and smoked 99% of other bikes out there
I also know you stick a marble or something in one of the tubes on the left side of the tank to completely block it off and stop back pressure or something. Can't remember 100% because I did it 5 years ago but know that is 1 trick
Is this process the same for 2015 zx10r
Excellent video would be nice to.kniw what vacuum lines to pull off and where to plug them
What is the secret sauce???and I have been watching all the series. You are be coming a legend bro.
Paying customers get that info ;)
How do we pay
@@jockvanniekerk8074 you have to get your bike done by him to now.
Not possible I live in New Zealand
Whats the secret bro ? I,m from Uruguay and i cant win s1000
What is the best exhaust I also have a 2016 zx10
hi mate I tried taking my nose come of today but struggled.
I got side fairings of but couldn't work out the nose cone.
do you happen to have a step by step video on how to do this. ?
also great job mate
I done this back in 2014 then again to my 2016 model I've shown this on the zx10r tuning group on Facebook
@Tyran Claypool lots of photos on zx10r tuning group on Facebook
@Tyran Claypool zx10r tuning
I'm the admin but have not logged on for 4 years
@Tyran Claypool I will log in one day and sort it out
What is the secret? I am from Uruguay and I have the same model, I am making the same modifications, I thank you.
🙏🙏🙏🙏 answer please thks
@@giancarlocattaneo8335 yeah please mate wanna do the mod too.
nice video, do you have any video of a better viewangel? i can't remove the upper side fairing :(
Awesome machine, my favorite shape. I will be putting sprint filter and titanium bits in my first gen during spring tune up. Too bad our riding season here in Canada is considerably shorter :)
Can I have you do mine?
We're you located
Nice great vid, I would have loved to see exactly how you removed the front fairing
Ooops, New England!!!!!!!! Still way too far to drive
Why did u drop the Triple Clamps 2 inches?
My two 2008 CBR 1000rr have had T clamps raised 1cm, yes I know Honda had off geometry bla bla, and still U dropped yours. Please explain
Regarding Cam Chain Adjuster, I KNEW I HEARD that DARN cam chain flapping right after cold start. I'd not put in earplugs, and heard the sound! Bike is completely stock and has 1200 miles, hence I can hear all its sounds.
How much of a problem is it? Minor concern? I ride hard, but not race. Where are you located and what do u think of the 2020?
Great vid, great quality, you speak well, and work so fast--heh heh!!!
Please let me know, as I'm sure the CMRA tuner I've been pestering is tired of questions---"Geeez kid, are you gonna spend any $ or just keep asking questions??!!????"--- that's what he might say and still he's too nice SO FAR>
Cheers and I hope this finds you well
Howdy, just heard your accent. U might be a Michigander. WAY too far to drive!! I'm in north Texas.
Also, how well finished the heat wrap is!!!!!!!!!!! Super stoked to see airbox and tank so well done!!
Now to finish watching and ENVY your skill
I pulled my CCT spring out and it was flattened. No more spring left in it. I stretched it out with 2 needle nose pliers. I reinstalled it and the chain noise stopped after it had a chance to push the tentionor back out. It was free and only cost me some time.
Simply Awesome
❤❤❤❤❤
Excellent video, bro. I crashed my 2019 ZX-10R and I'll have to replace the air intake duct and solenoid valve. Why did you remove the flapper in the intake duct? I also noticed that you didn't install the vacuum chamber nor the solenoid valve. Are they not needed?
Urs more worth than 650ib bcz he waste every money on carbon u do weight loss by taking brakes and parts that s cool
all right, can you ask me a question? the hose that leaves the engine and goes to the box that is next to the starter, what did you do with it, remove and cover the exit or keep it?
I saw you took it off but I didn't see what you put in its place
You straight fisted warrens bike! Rofl, durty bro!
How long is the process to wrap it all. I'm interested in learning how to build mine. These pointers are great
Great vid what’s the point of the charcoal canister, and what’s the advantage of removing the flapper, sorry for the newbie questions, but I’ve flashed mine with auto tune Woolich, and full Akrapovic system so I’m wondering does removing those parts help much, once again I have no idea what’s up with with those parts
I got the revised tensioner, the APE is sitting on my bench because I'm stupid. I have to throw that in. Where you located and are you flashing ecus?
I am. Rhode Island
I noticed a tube hanging out as you were putting the front end back on. What was that tube and where did it go? After the ad you were wrenching for 4 minutes but the tube was gone. Just curious as to whether you removed it.
Have you ever tried a ceramic thermal coat like Lizard Skin on the airbox? It might not look as nice. But should insult even better.
Whats wrong with the stock air systems?
Omggggf man you just made my day!!! I am actually buying 2016 model soon from a friend he only has m4 shorty on it I'm definitely gonna try your mods thanks!!
Nice pretty job there..!
Love the content Bro. Learning a lot!!
Good shit bro helped me a lot with removing the system on my bike but goddamn you need some power tools bro 🤣
literally, best music ever! also...great content
Awesome 👍🏻
how you lowered it in the front.since the fork is thinner at the bottom!is it safe?want to lower it.
Bro can you make my R3 to smoke every ither bike in its segment
My name is Warren and I have 2004 zx10r!!!!
Hi mate love what your doing.
I live in Australia and was wanting to know if I can become a paying customer to get the secret source.
Ecu flash bmc airfilter race ecu with all that other stuffs
Lost with me when you started talking about the plug and what you had to do with it ? Also doesn’t the cage thing keep out a lot of the big shit that could get into the air box ? One other thing the servo motor is right underneath the right fairing right ?
so what is the gain by removing flap and hoses on the throttle bodies?
will you have a d2 code fi light if so how to get rid of ir
What’s is the secret sauce cause I just picked up a zx10 I had a bmw before
What made you go kawi 🙃🤔
what kind of heat wrap brand you use ?
DEI
I think you should make a video on how you wrap your airbox and undertank area
I've got the same exact kind of flapper on my '14 VFR 800, I've disconnected the hose which I assume would keep it always open and I've found no difference in any way. What do find is different when doing this mod?
DaveSpen that air line OPENS the flapper, thus, if you removed your vacuum line, your flapper is always closed. You detuned your Honda. Great job.
Where did you get the plug that replaced the flapper motor
Does that same stuff work on a ZX14? New sub here so I gotta catch up.
Does the2012 600 have that ???!!!!
where did you buy the GPR for the 2016+ zx10r?
gpr web page
How much do you charge to do this to a customers bike?
Wrapping the airbox and tank with heatshield yip I understand and agree. But what I don't agree with is the fact that you removed the rubber lining on top of the enjin cover as that will also help as a heatshield.
engine runs cooler
Why not keep the mesh. Screen
Damn Japanese bikes are so friendly, you can strip it and fix it in your own garage.
I have a 2017 Ninja zx10r krt edition with a few bolton's. It made 198rwhp. I'd like to see what else you can get me. I'm not sure how to get ahold of you directly, but let me know and I'll give you my info as well.
Message me on facebook or instagram. EJR Performance
Message sent on fb
How about the code error do you delete them all?
Bruh you turning that bike into a Beast just subscribed 2 your channel great video
How many feet did you need of the heat shield tape
Another great video ,looking forward to seeing some runs and more Draggy times
I recently bought a stock 2011 zx10r! any suggestions? It's a terd!
Drop it off ;)
Hey bro,I have a 2000 zx12r, any secrets for that bike????
Get a newer bike or lots of nos
Where can I order the plug?
are the air box mods for sale.
looks damn good lowered..... i have a ZX 10 RR
Where do we pay ? And what’s the deal on the sauce
In motion or in race the air box should remain cooled.
So how do we know the secret sauce lol
become a paying customer ;)
@@EJR-Performance what's your phone number
And smile
So freaking sweet
that is one sick zx10r.
Hummmm
Nice bike and love the work you've done to it
Evan, I enjoyed this build series. Nice work! Very informative, thanks for sharing. Would like to see more like this.
What size plug is needed? Thanks
Plug is an oem part off a US gen 4
Where did you get the ram plug from?
Any luck on that plug
How much slower on top speed will going -1 tooth be???
are you referring to front sprocket?
In the video after this one you said Warren's bike was minus 1 tooth in the rear. On my 2016 ZX10R I'm running +1 in the rear 40 tooth, I don't notice much of a difference in max speed.
going down on rear increases top end.
going up on rear and down on front = more acceleration
going down on rear and up on front = top speed
Where you located?
I want you to hook my 16 zx up
Do you wrap your exhaust headers?
No sir
So, will removing the charcol canister throw any codes?
The cannister wont but the purge valve will. Thats why this is all tuned via woolich. You can turn all the codes off with woolich.
You da man!
Been following this channel for 5+ years i still go back an watch these old videos. This channel made me pick a gen 6 zx10 over the gixer keep up the good work
Why remove the flapper? Why not just disable it?
Little less weight and a little better air flow, when removed. Better to do 100% of the work then 70%
So I'm guessing I will need power commander and tune after all this?
how would one go about contacting you as far as this sort of service being done? looking to have near to the same thing done to my KRT edition as well
Ejr performance. On either facebook or instagram
Good content!
Question do these zx-10,s have variable intake runners?
Also very interested in the “secret sauce”
😁
Hey man can you also tell me what is the secret sauce