Nice show of vehicles. I was given a 2002 Kia Sportage from someone at my church. I didn't have one for 10 1/2 years. That things looks small compared to all those Broncos. With you putting all that love and building yourself, I can't wait to see the finished project. God Bless
Jack there was a lot of nice Broncos there. That was a generous gift you received. I know you appreciate it and can for it like we all do the Broncos. Take care friend.
I've done complete brakes, rotors and drums. New Spark plugs, coils, and harness. A new valve cover gasket. Two new tires in back. Synthetic high mileage oil. A new IAC valve. Run high mileage sea foam through it. It only has 127,000 + miles on it, but the suspension is rusted pretty bad. When it goes, no more car. I've had it since Oct. 2020 and it's up to the Lord to hold it together. My daughter helped me with things, because I couldn't afford it. But I take it one day at a time. God Bless
Yes sir. I was looking at that earlier and the distance. Only 1250 miles for us. We have made almost the same drive once before. I would like to do it again.
Thanks for the great videos. I’ve just started cutting on a 69 bronco . I thought all I needed was passenger floor pan and rockers but you know how that goes. Somebody welded a piece of 1/8” plate over the rusted pass side floor, but the frames are good. Anyway It’s been a big help watching your videos to see how the panels go together.
Just found your channel a few weeks ago and have been enjoying watching the videos on your project. Glad you enjoyed the show been going the last few years but have been over in the swapmeet area selling parts for my Bronco project is on hold until I get me a little shop built to work on it because it sucks trying to drag the tools out to do a little work on it then having to drag them all back inside when done. If you come for the 2022 show I'll be there since I got roped into setting up the RC obstacle course area for the little kids & the Big kids (Adults) to have fun on showing off their skills.
Great pics of the celebration....I really liked the idea of the rear barn doors.... I might explore that option in the future. Thanks for the shout out. We are going to try to stay more local next year to the event. Thoughts for going super celebration west?
I wish we took more photos but we were too busy just looking around. I would love to go to the Super Cel West at some point. I will have to look into it.
Hey Jason, When were you in Townsend? We were at Douglas Lake from April 10-28. We went to Townsend and Cades Cove a couple of times. Hope we didn’t miss y’all. Would have enjoyed seeing y’all and all the Broncos. We are now at the Hofwyl-Broadfield Plantation Historic Site in Brunswick, Ga. We are here for three months as volunteers helping take care of this beautiful historic pre-civil war rice plantation. Have you finished yours and showing it?
@@garynorman8097 Hello Gary! We were there April 21st - 25th. We did not have our Bronco there. We just went to enjoy the show and check out all the cool rides. I hate we missed you two. Sounds like you are seeing some amazing places. Hope to see yall soon.
@@garynorman8097 It's a great place to visit before you start your build to get information and Inspiration. I had a blast riding in the new 2021 Bronco with Shelby Hall and got to talk with a lot of good people including Jason and Jonnie. Lots of great advice everyone there was passionate about their Bronco and eager to share knowledge.
@@danieljohnson5849 We are full time RVers. We are good friends with Jason and Jonie and their family. Jason is a truly gifted mechanic and engineer. We like looking at his work and others that have a passion for restoring vintage cars. Our passion was restoring a 1890 historic Victorian house several years ago. I did see some vintage Broncos around town but did not connect them to a big show. Had no idea there was such a following of vintage Broncos. Enjoy your journey!
incredible, thank you for bringing this to us. proof positive it's the people and families who keep it all going. maybe someday i'll get to that.
Joe everyone was so nice. It was a great experience for sure.
Looks like you all had a real nice time!
Yes sir, it was a great time.
Glad you guys made it out! Sorry I didn’t get to shake your hand!
You were wrapped up the whole time . We will be back and hopefully be able to talk with ya a bit. It was a great show.
Great family memories. I enjoyed the scenery as much as all the Broncos. Thanks for sharing.👍
It was such a nice area for sure. Thanks for watching.
I watched for you folks there ,sorry I missed you and glad you enjoyed it.
I hate we missed you. We can't wait to go back again.
What a beautiful place God bless u guys
Thank you! It was amazing.
GREAT PICTURES, Thank you so much for sharing! Such a beautiful family.
Thank you Lance! I am blessed beyond measure for sure.
Nice show of vehicles. I was given a 2002 Kia Sportage from someone at my church. I didn't have one for 10 1/2 years. That things looks small compared to all those Broncos. With you putting all that love and building yourself, I can't wait to see the finished project. God Bless
Jack there was a lot of nice Broncos there. That was a generous gift you received. I know you appreciate it and can for it like we all do the Broncos. Take care friend.
I've done complete brakes, rotors and drums. New Spark plugs, coils, and harness. A new valve cover gasket. Two new tires in back. Synthetic high mileage oil. A new IAC valve. Run high mileage sea foam through it. It only has 127,000 + miles on it, but the suspension is rusted pretty bad. When it goes, no more car. I've had it since Oct. 2020 and it's up to the Lord to hold it together. My daughter helped me with things, because I couldn't afford it. But I take it one day at a time. God Bless
Hang in there Jack! Sounds like you are taking care of it properly so it should last you a long time.
Great memories made! I hope I can make it to SC West in September.
Yes sir. I was looking at that earlier and the distance. Only 1250 miles for us. We have made almost the same drive once before. I would like to do it again.
Thanks for the great videos. I’ve just started cutting on a 69 bronco . I thought all I needed was passenger floor pan and rockers but you know how that goes. Somebody welded a piece of 1/8” plate over the rusted pass side floor, but the frames are good. Anyway It’s been a big help watching your videos to see how the panels go together.
Thanks for watching Harry. Yes people can get creative when patching panels. Good luck on your build.
Just found your channel a few weeks ago and have been enjoying watching the videos on your project. Glad you enjoyed the show been going the last few years but have been over in the swapmeet area selling parts for my Bronco project is on hold until I get me a little shop built to work on it because it sucks trying to drag the tools out to do a little work on it then having to drag them all back inside when done. If you come for the 2022 show I'll be there since I got roped into setting up the RC obstacle course area for the little kids & the Big kids (Adults) to have fun on showing off their skills.
Thanks for watching John. We hope to be there next year. I remember seeing the RC track this year too. Good luck on your shop and Bronco.
Great pics of the celebration....I really liked the idea of the rear barn doors.... I might explore that option in the future. Thanks for the shout out. We are going to try to stay more local next year to the event. Thoughts for going super celebration west?
I wish we took more photos but we were too busy just looking around. I would love to go to the Super Cel West at some point. I will have to look into it.
Was there many for sale?.. great video. I never get tired of looking at first generation broncos
Yes sir there were several out in the show area that had for sale signs on them.
We love Townsend. We love to camp at Little Arrow campground. Not to people E.
It would be neat to pull our camper up there and try it out. Thanks for watching.
Hey Jason,
When were you in Townsend? We were at Douglas Lake from April 10-28. We went to Townsend and Cades Cove a couple of times. Hope we didn’t miss y’all. Would have enjoyed seeing y’all and all the Broncos. We are now at the Hofwyl-Broadfield Plantation Historic Site in Brunswick, Ga. We are here for three months as volunteers helping take care of this beautiful historic pre-civil war rice plantation. Have you finished yours and showing it?
@@garynorman8097 Hello Gary! We were there April 21st - 25th. We did not have our Bronco there. We just went to enjoy the show and check out all the cool rides. I hate we missed you two. Sounds like you are seeing some amazing places. Hope to see yall soon.
@@garynorman8097 It's a great place to visit before you start your build to get information and Inspiration. I had a blast riding in the new 2021 Bronco with Shelby Hall and got to talk with a lot of good people including Jason and Jonnie. Lots of great advice everyone there was passionate about their Bronco and eager to share knowledge.
@@danieljohnson5849 We are full time RVers. We are good friends with Jason and Jonie and their family. Jason is a truly gifted mechanic and engineer. We like looking at his work and others that have a passion for restoring vintage cars. Our passion was restoring a 1890 historic Victorian house several years ago. I did see some vintage Broncos around town but did not connect them to a big show. Had no idea there was such a following of vintage Broncos. Enjoy your journey!
It would be an excellent video if you also show the rest of the Bronco generations. Maybe next time. 😔