TS100 Soldering Iron - How to Fix OLED Display. Tutorial for repairing

แชร์
ฝัง
  • เผยแพร่เมื่อ 26 ก.ย. 2024
  • 👉 Don't forget to subscribe now to my channel so you don't miss anything. Click here:
    👉 www.youtube.co...
    Welcome to the channel! In this video tutorial, I will show you, step by step and in detail, how to fix the problem of the OLED display on your TS100 soldering iron not displaying correctly. If you are having difficulty with the display on your favorite soldering tool, this is the right video!
    👉 Find the TS100 soldering iron display I used here: aliexpress.com...
    In this tutorial, you will learn:
    🏅 Common causes of OLED display problems on the TS100 soldering iron.
    🏅 Tools needed to perform the repair.
    🏅 Detailed instructions and helpful tips for safely disassembling the unit.
    🏅 Precise steps to identify and replace defective components.
    🏅 Tips on how to avoid future problems with the OLED display.
    🏅 Don't worry if you're not an electronics expert, this tutorial is designed for beginners and enthusiasts alike! Follow the instructions carefully, and you'll be enjoying a fully functional TS100 soldering iron in no time.
    Remember to like the video and subscribe to the channel to receive more repair tutorials and tips on electronic tools. Share this video with friends who also have a TS100 to help them troubleshoot their OLED display problems.
    If you have any questions or comments, leave them in the comments section below. Thanks for watching this tutorial to the end and trusting me to solve your soldering problems!
    #SolderingTS100
    #WelderRepair
    #OLEDScreen
    #RepairTutorial
    #Electronics
    #Soldering
    #SolderingFix
    #DisplayProblems
    #TS100
    #ElectronicTools
    #TechnicalTips
    #EquipmentMaintenance
    #ProblemSolving
    #DIYElectronics
    #TechnicalTutorials
    #ProfessionalSoldering
    #OLEDFixing
    #RepairTechniques
    #SolutionDisplayDoesNotWork
    #EasyRepair

ความคิดเห็น • 4

  • @paulorobertoevangelista7120
    @paulorobertoevangelista7120 3 หลายเดือนก่อน

    Thank you so much. Just followed all the instructions and my ts100 is working again. It is easiest than look.

  • @ErikBongers
    @ErikBongers 3 หลายเดือนก่อน

    I repaired mine as well. Just be careful when desoldering. I pulled too hard on the old display and ripped off 3 pads from the pcb! Took me hours to fix that with wire strand bridges (like with broken trace repairs).

  • @TimJackson-q8w
    @TimJackson-q8w หลายเดือนก่อน

    Just tried this on one of my tired old TS100s. No problem in obtaining and soldering on a new one, but wrong size screen. All the advertised screens have a 0.69" long active area and 16 * 96 pixels. The one in my iron is about 0.88", same outside dimensions and connector but I think 32 * 128 pixels. Electrically compatible but of course not software compatible and the image is scrambled up. I presume mine was a later version of the iron. Maybe if I upgrade the software it might be back compatible....?

  • @yuriiserdiuk3918
    @yuriiserdiuk3918 21 วันที่ผ่านมา

    its not fix, its replasce display