@Belal Motawe Really cheap ass shit for spamming an advertisement in like that. Really slick, you complete and total tool. Please, nobody Google "Magic Mender Wizard", or give them one dollar of your money. Go spend money on advertising, shit head.
6 years later, I am seeing this. I work at a lead acid battery factory. I am a cell burner, so I line up the positive and negative plates and melt the posts with the terminals on them to the plates. But we make large industrial batteries where the individual cells weigh 25 to 240 pounds each. I enjoy it, and I enjoyed this video Cody. Thank you
@@iowafarmboy yes, I'm aware they do... molten lead doesn't have a high vapor pressure at it's melting point (327°C), so the main concern isn't the vapor, but lead oxide dust (the paste coated on the plates). But on a large scale, there's considerable exposure.... they're tested for it over the course of a few months. Exaust fans and such are used to protect them.
Best person for a post apocalyptic world to restart this planet. Happy, energetic, kind, thoughtful, smart and a troubleshooter. Plus, he works hard, and that's the most important part.
@@NwoDispatcher The answer is, have them participate from the time that they start developing an attention span and teach them everything you know as they grow up! It isn't rocket science... - Max Giganteum
Interesting video. From what I'm reading in the comments section of a lot of other videos, the reason to use sulfuric acid is because it freezes at a much lower temp than epsom salts etc. So low freezing point is a factor to consider here. Before watching your vid, I assumed the lead plates in batteries were simply thin squares of pure lead. Now I know they are a lot more complicated than that, I realize making or reconditioning an automotive battery is no simple matter.
Cody, thanks for the videos. They are entertaining and... well... I've learned a lot. I really enjoy how you do this stuff from odds and ends you have rather than running to the store every five minutes and buying things. Please keep it up.
Best video yet that I've found so far, for this type of hands on information. I'm thinking about making my own batteries. Just trying to understand what is involved, it's videos like this that will save me time & money. Thanks
Instead of quoting a mistake and emphasizing on it, you would do well in explaining, that Voltage is measured in volts, and Current is measured in Ampere. Voltage is the potential / level, and Ampère is the amount of current in the thread. The effect you get out is calculated by Volt times Ampere...
If only that was the biggest mistake in this video... During his explanation in the first couple minutes of the video, he didn't even get the reaction right.
That was totally awesome, and I believe it was one of your best videos yet! I think you are really improving a lot on your video-making skills and editing skills as well!
quite sure i was reading Megaohms on that multimeter not ohms XD, and btw usually multimeters can't give the proper resistence when you test directly the battery, try using a known resistor in series then measure the current passing through it, measure the voltage, then you just have to solve V=(Rr+Rb)*I => Rb=V/I-Rr that works much better and gives you a kinda accurate value of internal resistence of the battery
Lmao I love how you have your pre-properly-done solar panel, the ancestor of your current one. I've watched you forever now, and I really envy your lifestyle. Keep being a cool guy man, and keep making stuff you find interesting!
Nice tutorial, I did something similar a few years back, sort of a DIY solar charger and battery experiment, good work. I did find the irony a bit funny though with a tutorial about building a battery, right at a bank of batteries, near a generator, and your cam's battery dead ;)
Have you ever built Copper Aluminum batteries? I've seen interesting videos about them in the past and would love to see your take on them. Thanks for making all the great content!
Great video. There are declassified Navy training videos that go into detail on how the chemical reaction works on TH-cam. These videos were very informative.
Geez, that wrench you laid up by the batteries (around 17:30) is nearly giving me a heart attack. If it shorts across the terminals bad things could happen in a *flash*.
I have a question for a Cody level brain. I've been wondering about ways to store lead acid batteries long term. Let's say I buy a new battery, preferably "dry", but either way, then drain the acid, wash it out with distilled water, then dry it thoroughly. If I then placed this in a cool, dry place for 20 years, could I then add battery acid and expect it to function? Function like new? Even better, I could flood the battery case with nitrogen or some inert gas and then vacuum seal it, so there would be no oxidation during the storage period.
+Cody'sLab haha. And I thought nobody else was doing this because I couldn't find it on google. I should have known! Thanks man. So there's no concern with oxidation at all? This is for my golf cart battery bank. I would t want to buy $650 worth of batteries and reduce their life or capacity.
I've read MANY of the comments and answered a few. It seems to me that many people are just lazy and don't/won't do any of their own research. Some are just ridiculous like the one below about using mercury for a battery. Cody can't be expected to spend enormous amounts of time reading and answering questions from people that are to lazy to gain a basic understanding of the topic. Granted; schools don't teach much well anymore, but, i think it was Edison that said, if you read about something for 15mins. a day, within a year you'll be an expert! And i've found that to be true. With Google and the internet, if you can read, you can learn anything. With TH-cam you don't even need to be able to read well. You just have to be willing to put in the time and effort.
this video could be a guide of how to make this style of video, because he's giving us important information that people tend to forget. like telling us that a 12v battery charges at 14.4 volts, something most people forget to mention. or showing the plates and talking about surface area. these are very helpful for someone who didn't know this, instead of just saying there's lead plates and it's a 12v, battery charger. of course eventually people find these things out on their own but when you're totally clueless little things like that make a difference in understanding it. if i didn't know and i was charging something and then i measured it at 14.4 volts from the charger i might start to worry.
cody doesnt have college, he just started college recently because he found out he couldnt go to space if he didnt have degrees backing up his knowledge, thats how it works
Suppose education always equals intelligence? Just like education always equals manners and self discipline? Apparently not. Remember this when you interview for your next job breaking down old batteries. 😉
i dont think you can measure the internal resistance of a battery with an ohmmeter like that? considering the meter does the measurement by applying a voltage across the resistance to be tested. (your meter appears to say megaohms, not ohms)
The Ohmmeter puts a small current through the test object and measures the resulting voltage. Resistance is then calculated as R=U/I. Any voltage that's already across the test object will add to the above mentioned voltage, void the reading and can damage the ohmmeter (which is expecting only the small test voltage). Even if he'd manage to discharge the battery (to real zero volts), he can't do it like that, because the internal resistance is not like a normal resistor; it varies depending on different variables.
Thanks for solving one mystery for me. I always wondered why people do not recycle lead acid batteries. Melt the lead and make it new. I melt lead as a child too. But as you proved, obtaining performance is not child play. I will not complain anymore that batteries are expensive.
Hey Cody, I'm designing a led/acid battery for a school project. Does the volume of the cell matter? It's to my understanding that its the amount of surface area of the electrode which comes in contact with the electrolyte solution which matters but I wanted to check with you. Also do you know of ways to increase the voltage per cell? I want to make my cells as small/light as possible, thanks!
I was about to comment and say the same thing... I think I heard the firing rate decrease slightly after he disconnected the battery charger, so I'm thinking maybe hit-and-miss. Or old diesel with a huge flywheel. I'd love to see it though, I'm sure it's interesting regardless of what it is.
Thanks for the experiment! I plan to try this within the week. I need to buy some lead, there is a company in town that sells it. You say surface area is important, but your strips were narrow. Any reason why you didn't maximize the space inside the jars?
I would love to see that genny you have poppin in the background I have been working on achieving that exact sound/ speed I have a 3 1/2 briggs internally governed with an aprox 12 or 14 inch diameter driver and a delco alternator works but seems to have a conflictive issue with the governers .interaction/operation of fuel keeps trying to increase and I keep holding it in so its noise is internal and louder than its exhaust like a rod knock/wrist pin slap n yours sounds so sweeeet n steady would love to see it in action and with your ok reproduce one for myself I subscribed and really liked your video laiden jars I think they are called we find them in old farm houses for the phones usually sitting in floor joists or foundations top ledge its good to see someone else who tries to create and inspire others to do so as well as we are becoming a rare thing and almost a crime to do feel or be creative,inovative or challenge the status quo and have the gall to think for yourself they just wont let you do it here and go to great effort to control or remove you if you buck with em near 30 yrs I been fighting it n them and no end in sight and your genny would ease my load outta sight outta mind I live on solar/ gen they wont hook my power up no gas either cause I have an rv on my land to live in which I wouldn't be in if they hadent made my landlord and a sherriff at all but gun point evict me not for monies owed or any other reason but my junk collection and machines I build so watch out if they aren't on ya they will be and again thanks
Cody is there a way yo incorporate the added surface area in order to make electrolysis faster on the stainless steel used for hydrogen generators? Like add a paste to the stainless steel, higher surface area more electrolysis?
You've mentioned having a bigger voltage solar panel(14V) in your video make 'em charge the battery. But can I also work on equal? 12v solar panel to charge those up? I asked coz It be universal to use a 12V panel to direct electronic equipment vs a 14Volt one. Thanks!
I wonder how much it would increase the capacity if you made some thin sheets and rolled the electrodes into a cylinder with fiberglass in between so it was rolled like a capacitor is, what do you think?
Wow Cody your videos are fascinating I am becoming a fan. TH-cam recommended a video of yours. Thanks I am subscribing to your channel now. "THANKS TH-cam". I ALSO LIKE BIGCLIVE AND AvE VIDEOS. AvE VIDEOS ARE THE FUNNIEST.
Hey Cody, Could you do a video on how to restore a car battery? And explain how the indicator lights on the top work? (Heard lots of (mis)information about draining the fluid, adding Epsom salt solution, draining again and then filling with distilled water again would this work? Aren't you removing the acid?)
Easy way to remember volts are not the same as current, current being measured in Ampere. Voltage is like a water tower, storing x amount of water and by being held higher than all the houses it feeds, uses gravitational energy to pressurize your water lines at home. Voltage is akin to water pressure in this case. Your regulator on your water meter is like the transformer on your power pole, bringing the "pressure" from the tower down to something usable. When you turn on your faucet, the amount of water coming out of it is akin to the current of electricity. So voltage is potential and current is flow. I could be lying tho
I have a few questions. I thought you had to start with two dissimilar metals. Also thought that full strength electrolyte provided full charge without charging. Thanks for the info on non acid electrolyte. I have a few dead battery's I would like to salvage Good video.
The way i understand it is, with his method, charging creates the second metal by creating a layer of lead oxide on one plate. The batteries you buy from the store are already 2 different metals. 1 set of plates are lead and the other set are lead oxide or some other lead compound.
@@justthinkalittle8913 Ya, I still care. :) As best as I can find, your description is all that really matters. Better ones use fiberglass. Cheaper ones use paper. The few that I've torn down so far used some plastic that got brittle and basically fell apart. It looks like that's why those particular batteries died. They build them to be replaced in 2 to 5 years, not last until the plates break down.
I'm curious, I've played around making batteries of different types as a kid, never a lead/acid batt though. I never had luck making one that was usable. Are these cells useable?
Reading over this again. Cody gave a general idea of how this works. Ya his was not very good but I got the idea. That was his plan. I knew one of the material engineers from the Gemini space program. He helped create the heat shield material. I can tell that him and Cody think a lot alike. Now then for this battery I'm thinking that we must grind the lead to a consistency of coffee grounds, and mix those grounds with fiberglass insulation. Maybe something like the old table top hand meat grinder would mix them into a paste like substance, I'm not sure but I think in order to get enough surface this material has to be broken down.
How do these batteries differ from deep cycle LA batteries? Would a permeable polyethylene, like landscape fabric for example, work well to separate the plates?
Cody let me start by saying I'm a big fan. I have an unrelated question. did you add the acid battery ad below the video? or TH-cam did that automatically?
![[Vowel]물고기는 물에서 살아야 해🐟🤣Fish have to live in the water #funny](http://i.ytimg.com/vi/3G9MH063Cx4/mqdefault.jpg)
My science teacher shows your videos in class all the time
lol
Well said. Thumbs up.?
I try to use your information
@Belal Motawe Really cheap ass shit for spamming an advertisement in like that. Really slick, you complete and total tool. Please, nobody Google "Magic Mender Wizard", or give them one dollar of your money. Go spend money on advertising, shit head.
Wow mad respect to cody and lol good way for ur teatcher to take shortcuts 👍🏽
Wat gread r u in?
6 years later, I am seeing this. I work at a lead acid battery factory. I am a cell burner, so I line up the positive and negative plates and melt the posts with the terminals on them to the plates. But we make large industrial batteries where the individual cells weigh 25 to 240 pounds each. I enjoy it, and I enjoyed this video Cody. Thank you
That sounds like a cool job
@@tek4 until you realize how dangerous it is... well, lead poisoning is the main concern.
thank you for your service
@@Ryan-lc4blI'd assume they have some really good respiratory protection and such
@@iowafarmboy yes, I'm aware they do... molten lead doesn't have a high vapor pressure at it's melting point (327°C), so the main concern isn't the vapor, but lead oxide dust (the paste coated on the plates).
But on a large scale, there's considerable exposure.... they're tested for it over the course of a few months.
Exaust fans and such are used to protect them.
Best person for a post apocalyptic world to restart this planet. Happy, energetic, kind, thoughtful, smart and a troubleshooter. Plus, he works hard, and that's the most important part.
The question is, how do you raise children like that?
@@NwoDispatcher The answer is, have them participate from the time that they start developing an attention span and teach them everything you know as they grow up! It isn't rocket science...
- Max Giganteum
Interesting video.
From what I'm reading in the comments section of a lot of other videos, the reason to use sulfuric acid is because it freezes at a much lower temp than epsom salts etc. So low freezing point is a factor to consider here.
Before watching your vid, I assumed the lead plates in batteries were simply thin squares of pure lead. Now I know they are a lot more complicated than that, I realize making or reconditioning an automotive battery is no simple matter.
i love the crudeness of your process and the way you do things, just to see if you could. Very cool man. keep up.
"That's a good way to lead yourself"
-Cody 2016
That was great! So much practical information made easy to digest. Thanks so much!
can you explain more about your battery ?
thanks , Kathrine !
Nice to see you here! Although I shouldn't be the least surprised. Hope the fortress roof is going well! :)
Cody, thanks for the videos. They are entertaining and... well... I've learned a lot. I really enjoy how you do this stuff from odds and ends you have rather than running to the store every five minutes and buying things. Please keep it up.
Best video yet that I've found so far, for this type of hands on information. I'm thinking about making my own batteries. Just trying to understand what is involved, it's videos like this that will save me time & money. Thanks
"And now the current I'm getting is like 4 volts."
Oh Cody...
immibis 4volts of current..
he is majoring in geology and minoring in chem. I wouldn't blame him for making such a small mistake.
Instead of quoting a mistake and emphasizing on it, you would do well in explaining, that Voltage is measured in volts, and Current is measured in Ampere. Voltage is the potential / level, and Ampère is the amount of current in the thread. The effect you get out is calculated by Volt times Ampere...
@@DigitalAgeInstitute He makes these mistakes on purpose just to screw with people.
If only that was the biggest mistake in this video... During his explanation in the first couple minutes of the video, he didn't even get the reaction right.
That was totally awesome, and I believe it was one of your best videos yet! I think you are really improving a lot on your video-making skills and editing skills as well!
Thanks so much Buddy to share with us your knowledge, very clear explanation. Terrific job !
quite sure i was reading Megaohms on that multimeter not ohms XD, and btw usually multimeters can't give the proper resistence when you test directly the battery, try using a known resistor in series then measure the current passing through it, measure the voltage, then you just have to solve V=(Rr+Rb)*I => Rb=V/I-Rr that works much better and gives you a kinda accurate value of internal resistence of the battery
Nice short summary of how a battery works
Always a great time going back into the oldies!
A very good video explaining how lead acid battery works.
So glad to see this! Can't believe i haven't seen this one before. Thanks for the tutorial on making a battery
Super great explination and an easy to understand build
Very much appreciated.
Subbed because I learned more about lead acid batteries in 20 minutes than ever before! 😄😎👍❤️
Great work , love how you teach .
Lmao I love how you have your pre-properly-done solar panel, the ancestor of your current one. I've watched you forever now, and I really envy your lifestyle. Keep being a cool guy man, and keep making stuff you find interesting!
Thanks Cody,
Saw this but never made a comment,will be watching more of your stuff.take care and be safe
Good show. Thanks for the effort you put at demonstrating things for us. And with one hand! :-)
This video was very informative, thanks for sharing your knowledge in this great walkthrough.
Nice tutorial, I did something similar a few years back, sort of a DIY solar charger and battery experiment, good work. I did find the irony a bit funny though with a tutorial about building a battery, right at a bank of batteries, near a generator, and your cam's battery dead ;)
Awesome Cody, thanks that answered so many of my questions :)
Prof cody.. i learn a lot from you..keep it up
Hey Cody sounds like you have a lister genset running in background, it sounds like the one I have. Thanks for your videos keep up the good work.
I have a chemistry project about this for a finals project
This has helped a lot
Robert murray smith got me into batteries recently and how usefull they are so now im watching this again years later
im over here studying lead acid batterys for a project im working on and i find out one of my favorite youtubers has a video on them
very well explained!
i thought ppl said arsenic smelled like almonds and dirty socks?? im friken addicted to ur vids man def gets a like from me
that is cyanide
*****
ahhh thats right,
Arsenic smells like old lace.
Number 1 in Sherlock Holmes's chemistry lab! Prussic acid (hydrogen cyanide) smells like bitter almonds. A bit of a mad Holmes fan I'm afraid.
Almonds smell like cyanide, cyanide doesn't smell like almonds.
Have you ever built Copper Aluminum batteries? I've seen interesting videos about them in the past and would love to see your take on them.
Thanks for making all the great content!
Dude, That was awesome! Keep that up!
Good vid, Ive been searching for this.
You have the best channel
This is what i would expect the Professor to demonstrate from a episode of Gilligan’s Island!
I Appreciate the video. Thanks for the info!
Great video. There are declassified Navy training videos that go into detail on how the chemical reaction works on TH-cam. These videos were very informative.
I found your comment interesting, you could tell us where to see this information, thank you very much :)
Got a link❓
love your videos...keep'em com'in
Geez, that wrench you laid up by the batteries (around 17:30) is nearly giving me a heart attack. If it shorts across the terminals bad things could happen in a *flash*.
I have a question for a Cody level brain. I've been wondering about ways to store lead acid batteries long term. Let's say I buy a new battery, preferably "dry", but either way, then drain the acid, wash it out with distilled water, then dry it thoroughly. If I then placed this in a cool, dry place for 20 years, could I then add battery acid and expect it to function? Function like new? Even better, I could flood the battery case with nitrogen or some inert gas and then vacuum seal it, so there would be no oxidation during the storage period.
th-cam.com/video/DMxIorjaFIM/w-d-xo.html
+Cody'sLab haha. And I thought nobody else was doing this because I couldn't find it on google. I should have known! Thanks man. So there's no concern with oxidation at all? This is for my golf cart battery bank. I would t want to buy $650 worth of batteries and reduce their life or capacity.
@@theCodyReeder dont get any lead on you touching it or breath any lead dust etc. it car reak havoc on the body. I Love your videos 👍
Cody, many of your fans have asked you many questions that you haven't answered. The answers would greatly add to the education provided.
I've read MANY of the comments and answered a few. It seems to me that many people are just lazy and don't/won't do any of their own research. Some are just ridiculous like the one below about using mercury for a battery. Cody can't be expected to spend enormous amounts of time reading and answering questions from people that are to lazy to gain a basic understanding of the topic. Granted; schools don't teach much well anymore, but, i think it was Edison that said, if you read about something for 15mins. a day, within a year you'll be an expert! And i've found that to be true. With Google and the internet, if you can read, you can learn anything. With TH-cam you don't even need to be able to read well. You just have to be willing to put in the time and effort.
this video could be a guide of how to make this style of video, because he's giving us important information that people tend to forget. like telling us that a 12v battery charges at 14.4 volts, something most people forget to mention. or showing the plates and talking about surface area. these are very helpful for someone who didn't know this, instead of just saying there's lead plates and it's a 12v, battery charger. of course eventually people find these things out on their own but when you're totally clueless little things like that make a difference in understanding it. if i didn't know and i was charging something and then i measured it at 14.4 volts from the charger i might start to worry.
This is what would of happened if the Trailer Park Boys went to college...
Cody sometimes sounds sooo much like Bubbles though!
cody doesnt have college, he just started college recently because he found out he couldnt go to space if he didnt have degrees backing up his knowledge, thats how it works
You cannot do this kind of shit up you choof or game 24/7 - the amount of work just getting this stuff together... phew!
Suppose education always equals intelligence? Just like education always equals manners and self discipline? Apparently not.
Remember this when you interview for your next job breaking down old batteries. 😉
@@GamingAmbienceLive what? You say i can't go to Mars without wasting 4 years of life on a bullshit college degree?
Fun cody is better than depressed cody. Reignite the fire cody! You are still an inspiration.
Nice..... Learned a lot!!!
i dont think you can measure the internal resistance of a battery with an ohmmeter like that? considering the meter does the measurement by applying a voltage across the resistance to be tested. (your meter appears to say megaohms, not ohms)
Yes. Fully agree with jonsykkel. Can't do that. The battery volts will make a mess of your Ohms reading.
Exactly, you need a LOAD resistance and measure the open and closed circuit to get internal resistance.
jonsykkel you are correct
Normally, you can't measure internal resistance using an ohmmeter. That's why he discharged the battery before doing the measurement.
The Ohmmeter puts a small current through the test object and measures the resulting voltage. Resistance is then calculated as R=U/I.
Any voltage that's already across the test object will add to the above mentioned voltage, void the reading and can damage the ohmmeter (which is expecting only the small test voltage).
Even if he'd manage to discharge the battery (to real zero volts), he can't do it like that, because the internal resistance is not like a normal resistor; it varies depending on different variables.
you are very talented and I can tell that you listened in science class
I got it now Cody . 👍 Thanks 😊
If he ever runs low on ideas I would love to see him recreate these videos in higher quality
i love your vids cody
Thanks. Great job :-)
Thanks for solving one mystery for me. I always wondered why people do not recycle lead acid batteries. Melt the lead and make it new. I melt lead as a child too. But as you proved, obtaining performance is not child play. I will not complain anymore that batteries are expensive.
btw: you cant messure the batteries internal resistance directly with a DMM in ohms mode
I was just looking for cheap offgrid batteries this makes me wanna try to make my own...
That was really cool
Thank you so much for this video
This is fascinating. I've been living on a lead acid battery over a couple of years. It's always empty let me tell ya
Hey Cody, I'm designing a led/acid battery for a school project. Does the volume of the cell matter? It's to my understanding that its the amount of surface area of the electrode which comes in contact with the electrolyte solution which matters but I wanted to check with you. Also do you know of ways to increase the voltage per cell? I want to make my cells as small/light as possible, thanks!
you inspire me to create something huge ;)
just kidding dont try this at home kids
Well done.
Cody you're so smart
great vid.
What kind of generator is that you are running? It sounds like a steam engine. Or an old hit and miss engine.
Sounds like a low spark rate engine, probably with a flywheel. Sounds pretty efficient.
Craig Arnold My bet would be on a Lister diesel clone from India "Listeroid".
Those reasons are gone
+Dogurasu You probably should've googled or searched youtube for "lister clone" before you made that comment.
I was about to comment and say the same thing... I think I heard the firing rate decrease slightly after he disconnected the battery charger, so I'm thinking maybe hit-and-miss. Or old diesel with a huge flywheel. I'd love to see it though, I'm sure it's interesting regardless of what it is.
Thanks for the experiment! I plan to try this within the week. I need to buy some lead, there is a company in town that sells it. You say surface area is important, but your strips were narrow. Any reason why you didn't maximize the space inside the jars?
So when the apocalypse hits, I'm just gonna find Cody and do whatever he's doing. This is functional chemistry at its finest.
Strong uploads god bless
I would love to see that genny you have poppin in the background I have been working on achieving that exact sound/ speed I have a 3 1/2 briggs internally governed with an aprox 12 or 14 inch diameter driver and a delco alternator works but seems to have a conflictive issue with the governers .interaction/operation of fuel keeps trying to increase and I keep holding it in so its noise is internal and louder than its exhaust like a rod knock/wrist pin slap n yours sounds so sweeeet n steady would love to see it in action and with your ok reproduce one for myself I subscribed and really liked your video laiden jars I think they are called we find them in old farm houses for the phones usually sitting in floor joists or foundations top ledge its good to see someone else who tries to create and inspire others to do so as well as we are becoming a rare thing and almost a crime to do feel or be creative,inovative or challenge the status quo and have the gall to think for yourself they just wont let you do it here and go to great effort to control or remove you if you buck with em near 30 yrs I been fighting it n them and no end in sight and your genny would ease my load outta sight outta mind I live on solar/ gen they wont hook my power up no gas either cause I have an rv on my land to live in which I wouldn't be in if they hadent made my landlord and a sherriff at all but gun point evict me not for monies owed or any other reason but my junk collection and machines I build so watch out if they aren't on ya they will be and again thanks
This is awesome
Hi Cody, can you pls reshoot some of the older stuff in better quality?
Cody is there a way yo incorporate the added surface area in order to make electrolysis faster on the stainless steel used for hydrogen generators? Like add a paste to the stainless steel, higher surface area more electrolysis?
You've mentioned having a bigger voltage solar panel(14V) in your video make 'em charge the battery. But can I also work on equal? 12v solar panel to charge those up? I asked coz It be universal to use a 12V panel to direct electronic equipment vs a 14Volt one. Thanks!
so, batteries are just capacitors but the plates have higher resistence than the ones used in common capacitors?
"Or you could pause the video". Love this line.
I wonder how much it would increase the capacity if you made some thin sheets and rolled the electrodes into a cylinder with fiberglass in between so it was rolled like a capacitor is, what do you think?
Wow Cody your videos are fascinating I am becoming a fan. TH-cam recommended a video of yours. Thanks I am subscribing to your channel now. "THANKS TH-cam". I ALSO LIKE BIGCLIVE AND AvE VIDEOS. AvE VIDEOS ARE THE FUNNIEST.
And I thought I was smart because I made a potato clock, this saddens me greatly :(
Yet he can kill himself with half of the things he does
Very cool.
Hey Cody, Could you do a video on how to restore a car battery? And explain how the indicator lights on the top work?
(Heard lots of (mis)information about draining the fluid, adding Epsom salt solution, draining again and then filling with distilled water again would this work? Aren't you removing the acid?)
Great video, as always! I'm just curious, how many car batteries do you have laying around?😀
Yes.
hydrogen and sparks...hmmmm...
meh hydrogen in open air diffuses at such a fast rate that no explosive concentrations will be reached, especially at the rate he is charging at.
fun
in the open air? nothing to worry about.
did anyone else see the the irony in him working on a battery and him saying him saying his cameras battery is dying
I saw more irony in Him doing a battery info vid while the generator is charging the battery set the whole time. Kinda nulls the whole thing.
There's no irony. Only lead.
Deadaunt telivision i was just about to say something
Easy way to remember volts are not the same as current, current being measured in Ampere. Voltage is like a water tower, storing x amount of water and by being held higher than all the houses it feeds, uses gravitational energy to pressurize your water lines at home. Voltage is akin to water pressure in this case. Your regulator on your water meter is like the transformer on your power pole, bringing the "pressure" from the tower down to something usable. When you turn on your faucet, the amount of water coming out of it is akin to the current of electricity. So voltage is potential and current is flow. I could be lying tho
not lying, you can say that again
I have a few questions. I thought you had to start with two dissimilar metals. Also thought that full strength electrolyte provided full charge without charging. Thanks for the info on non acid electrolyte. I have a few dead battery's I would like to salvage Good video.
The way i understand it is, with his method, charging creates the second metal by creating a layer of lead oxide on one plate. The batteries you buy from the store are already 2 different metals. 1 set of plates are lead and the other set are lead oxide or some other lead compound.
can this trick of reversing the polarity of charging work on normal battery to change its plate into each other ??
You should try ALUM, pickling alum. Look up John bedini alum battery videos, that will help. Thanks great vid.
Cody, question about real batteries. When you're rebuilding, what do you use to replace damaged separator/divider/sleeves/membranes?
if you still care; you can use anything that can survive the environment inside the battery that is also non conductive and porous.
@@justthinkalittle8913 Ya, I still care. :) As best as I can find, your description is all that really matters. Better ones use fiberglass. Cheaper ones use paper.
The few that I've torn down so far used some plastic that got brittle and basically fell apart. It looks like that's why those particular batteries died. They build them to be replaced in 2 to 5 years, not last until the plates break down.
does the battery still work if a neodymium magnet accidentally dropped in? is it better or worse or no difference... 🤔🤗
I'm curious, I've played around making batteries of different types as a kid, never a lead/acid batt though. I never had luck making one that was usable. Are these cells useable?
Reading over this again. Cody gave a general idea of how this works. Ya his was not very good but I got the idea. That was his plan. I knew one of the material engineers from the Gemini space program. He helped create the heat shield material. I can tell that him and Cody think a lot alike. Now then for this battery I'm thinking that we must grind the lead to a consistency of coffee grounds, and mix those grounds with fiberglass insulation. Maybe something like the old table top hand meat grinder would mix them into a paste like substance, I'm not sure but I think in order to get enough surface this material has to be broken down.
Is that mean I can restore Pb battery by reversing the charge in order to lower internal resistence ?
Nilered has videos on a sort of lead sponge he made. I want to see it in a battery like someday. Even more now I've seen this!
How do these batteries differ from deep cycle LA batteries?
Would a permeable polyethylene, like landscape fabric for example, work well to separate the plates?
Cody, you should do a video and make a diy nickel iron battery!
So if you want high current should you add as much electro light as that is soluble because it would decrease the resistance
21:03 made my heart skip a beat haha
Cody let me start by saying I'm a big fan. I have an unrelated question. did you add the acid battery ad below the video? or TH-cam did that automatically?
Hi cody did you make a video on how the lead acid battary works ?