Can anyone tell me if we can bind two 2 receivers to one controller, I tried and lost my truck but binded my trailer do I need to put a pin in both recivers at the same time. I have set trailer as a second model on controller but I realised that it won't work as the lights are on different set up.... In short how do I bind TRUCK and TRAILER so lights work on both indicators and break light's. This may seem a dumb question to sum but I'm 54 and have some mental issues with learning which is why I got into this hobby trying to keep my brain engaged 😊
Hello .I don't know exactly how much oil I put in, but I added little by little until the ramps on the trailer started to rise. I will make a trailer video tomorrow, as someone asked me before and I promised to make a hydraulic video. I used oil from rc4wd ISO 32 just like with the rc loader you can see video with unboxing with the komatsu loader how the oil looks👍👍
@@RC.G.M.DTruckconstruction Thank you very much for your reply. I will be paying close attention to your videos, I like them a lot. Do I apply the oil where the yellow screw is?
Need more info im up to joining the pump and its impossible to tell which wire is which one side colour coded other all black how stupid the designers are, also it a converluted wiring set up....
when you plug the cables to the hydraulic pump, you will have to put the hydraulic oil in the tank and if it is connected the other way around, it will release pressure on the screw from the oil tank, it will release the oil, if it is installed correctly, it will not release the oil, I hope it helps you
@@RC.G.M.DTruckconstruction wow and cheers, because of the stupid diagrams and useless instructions I'm still trying to do the wiring, I've got all leds ready and soldered the power supply ready for battery BUT not sure wear all the connectors go the 3 wire harnesses, like the servo and reciver. Point is if any one has made a map of it correctly connected I'd be extremely grateful, I'm no dumby when it comes to wiring diagrams but this is ludicrous, and I'm definitely not the only one. What is annoying is I bought this just before the pandemic but I didn't get I'll I've got extreme depression so between painting and bad instructions/diagrams I'm still at it, not mentioning I paid $2000.00 Aus for it and can buy one put together for almost half price from TOUCAN now which doesn't help my mood 😕😞 😖
@@RC.G.M.DTruckconstruction my instructions do not show which wires go to wear on channel reciver and I am very concerned about shorting it out I can't afford more Ruddy parts, and going by the response on the internet I'm not the only one, if any one out there can draw a basis diagram I think I lost of people would be thankful if I do figure this out I WILL POST MY OWN
You said it mate feel exactly the same way, instructions are useless and now it's sold out together for the price I paid as a kit, also no stickers total rip off
I don't suppose you could draw a diagram showing what colour goes to wear especially joining reciver. It would be greatly appreciated 👍 I've blown up way to much stuff on other projects and I can't afford to do that here, cheers
@@RC.G.M.DTruckconstruction cheers mate bit late for me, won't be able to do anything for 3 weeks now as I burnt one of my speed controller, I've ordered 2 one for the leg's (burnt out) and a spare for the oil pump just in case I've ruined that.... This is why I've been searching the Net to try and avoid this from happening, PLEASE HELP OTHERS SO THEY DON'T GO THROUGH THIS, it's getting to expensive for small mistakes. CHEERS 🥳
![เปิดบ้านสุดหรู "เเจ็ค the ghost" ลั่นถ้าป๋องกพลลำบากผมเลี้ยงเอง!! l [Nickynachat]](http://i.ytimg.com/vi/1xbW4vULqGc/mqdefault.jpg)
This is just what i needed!! I'm currently building this. Excellent. Thanks! Thumbs up!
Also i recommend using electrical tape to hold wires in place 🙂
Can anyone tell me if we can bind two 2 receivers to one controller, I tried and lost my truck but binded my trailer do I need to put a pin in both recivers at the same time.
I have set trailer as a second model on controller but I realised that it
won't work as the lights are on different set up....
In short how do I bind TRUCK and TRAILER so lights work on both indicators and break light's.
This may seem a dumb question to sum but I'm 54 and have some mental issues with learning which is why I got into this hobby trying to keep my brain engaged 😊
you need a controller that works 2 receivers not all work I use paladin pl18
I mixed the channels on the trailer with the truck from the remote control, I'm sure AS I showed in the video
Hello. How much oil do you put in the tank? And what kind of oil? Where do you apply it? Any video to watch?
Hello .I don't know exactly how much oil I put in, but I added little by little until the ramps on the trailer started to rise. I will make a trailer video tomorrow, as someone asked me before and I promised to make a hydraulic video. I used oil from rc4wd ISO 32 just like with the rc loader you can see video with unboxing with the komatsu loader how the oil looks👍👍
@@RC.G.M.DTruckconstruction Thank you very much for your reply. I will be paying close attention to your videos, I like them a lot. Do I apply the oil where the yellow screw is?
@juret-i2t Yes. yellow screw
my friend please can you put the translation into Italian I thank you I would be interested in your videos🙏🙏🙏
you should have option in youtube for italian translation
@@RC.G.M.DTruckconstruction ok🙏
Need more info im up to joining the pump and its impossible to tell which wire is which one side colour coded other all black how stupid the designers are, also it a converluted wiring set up....
when you plug the cables to the hydraulic pump, you will have to put the hydraulic oil in the tank and if it is connected the other way around, it will release pressure on the screw from the oil tank, it will release the oil, if it is installed correctly, it will not release the oil, I hope it helps you
@@RC.G.M.DTruckconstruction wow and cheers, because of the stupid diagrams and useless instructions I'm still trying to do the wiring, I've got all leds ready and soldered the power supply ready for battery BUT not sure wear all the connectors go the 3 wire harnesses, like the servo and reciver.
Point is if any one has made a map of it correctly connected I'd be extremely grateful, I'm no dumby when it comes to wiring diagrams but this is ludicrous, and I'm definitely not the only one.
What is annoying is I bought this just before the pandemic but I didn't get I'll I've got extreme depression so between painting and bad instructions/diagrams I'm still at it, not mentioning I paid $2000.00 Aus for it and can buy one put together for almost half price from TOUCAN now which doesn't help my mood 😕😞 😖
@leewilliams9904 keep calm take your time look carefully at the instructions it's more fun when you build it 👍👍👍
@@RC.G.M.DTruckconstruction my instructions do not show which wires go to wear on channel reciver and I am very concerned about shorting it out I can't afford more Ruddy parts, and going by the response on the internet I'm not the only one, if any one out there can draw a basis diagram I think I lost of people would be thankful if I do figure this out I WILL POST MY OWN
@@RC.G.M.DTruckconstruction PS I live in the country no were near any help, that is why I have asked a fellow RC builder for help
It pissed me off when i found out they didn't provide that part for the price of these trailer and now real quilty instructions
You said it mate feel exactly the same way, instructions are useless and now it's sold out together for the price I paid as a kit, also no stickers total rip off
I don't suppose you could draw a diagram showing what colour goes to wear especially joining reciver. It would be greatly appreciated 👍 I've blown up way to much stuff on other projects and I can't afford to do that here, cheers
@leewilliams9904 i will try to do today👍
@@RC.G.M.DTruckconstruction cheers mate bit late for me, won't be able to do anything for 3 weeks now as I burnt one of my speed controller, I've ordered 2 one for the leg's (burnt out) and a spare for the oil pump just in case I've ruined that....
This is why I've been searching the Net to try and avoid this from happening, PLEASE HELP OTHERS SO THEY DON'T GO THROUGH THIS, it's getting to expensive for small mistakes.
CHEERS 🥳