My sight glass to fill my Mac 5200 for whatever reason is not reading on the Red Dot so how many ounces do I actually need to put in when changing the oil
I think the original bottle was about 10 ounces but not sure. I don't have access to that compressor and I don't know remember what I did in the video.
@@DimplesDon9 wala akong video na magtrip yong house breaker . Pag nag trip yong compressor, baka may tubig sa tank, marumi yong filter or bad capacitor
yeah its loud...but she packs quite a bit of power for the pricetag.6.5 scfm is pretty damn good.she will run an air hammer no problem...except it would have to be like 10 second bursts.
Honestly couldn't tell you, we only use it for staple guns. The thing I don't like on this one though, is that the tank is small , that starts to refill right away and it's loud
This compressor is defective trash. Look up "Makita MAC5200 keeps shutting off" or "tripping reset" or variations. I had used mine for less than an hour when it stalled upon attempting to refill its tank and blew its own (not the household) circuit breaker. It turns out that this is a widespread occurrence with this model. I had it serviced under warranty. The only thing to attempt was replacing the check valve. After the repair I used the compressor for 10 minutes or so until it stalled and blew its circuit breaker again. It is topped up with oil and used in an extremely undemanding environment. This product is known to be fatally flawed and should have been pulled from the market years ago. Makita is banned from my shop now. AVOID.
Those quick couplers on the machine that come with the compressor will fail over time. Probably one and a little later, both. Just replace from the start with quality US made quick couplers.
That is loud will be much louder if it was being used in a single or double car garage. Makita should have included ear protection since it has storage for it.
Thanks. Exactly what I was hoping to find online before I ran through initial startup.
Glad it was helpful
My sight glass to fill my Mac 5200 for whatever reason is not reading on the Red Dot so how many ounces do I actually need to put in when changing the oil
I think the original bottle was about 10 ounces but not sure. I don't have access to that compressor and I don't know remember what I did in the video.
Actually compared to other compressors, and I have had many different like Craftsman, MP, this one is relatively quiet.
Nice naman po thank you for sharing your beautiful blogging
Salamat
Just bought one. Thanks for the overview. God bless.
Okay ba itong iplug sa 15 amp outlet circuit breaker? Hindi ba mag trip off ang power?
15amp yong circuit na ginagamit namin. Don't use any other appliance or heavy draw tools on the same circuit.
@@masguapoako meron kang video na nag tri-trip yung power niya anong dahilan?
@@DimplesDon9 wala akong video na magtrip yong house breaker . Pag nag trip yong compressor, baka may tubig sa tank, marumi yong filter or bad capacitor
@@masguapoako 👍 salamat.
@@masguapoako yeah nakita kna uli yung video mo about mac5200 keep shutting off. Pano nagkaron ng water sa tank? Tips to avoid?
maayung adlaw. nice sharing unboxing items. full watched.
yeah its loud...but she packs quite a bit of power for the pricetag.6.5 scfm is pretty damn good.she will run an air hammer no problem...except it would have to be like 10 second bursts.
The motor kicks in a lot when stapling
I dont suppose you ever downloaded a decibel app to your phone to check the actual decibels, did you?
no, but I think it's around 90db
Is it normal to feel a draft of air on the side of this air compressor while its compressing air?
yes mine does the same thing, there's also an air filter sucking air
@@masguapoako cool thanks I was just checking to be safe. I'm relieved its normal
Would have been nice if you explained what size hoses you could use, what tools you could run and at what PSI.
Those topic could be a book on it's own. Seems too much to ask for a 7 mins video.
@@foodparadise5792 agree
Would this run two framing guns at the same time? What about two roofing guns at the same time?
Honestly couldn't tell you, we only use it for staple guns. The thing I don't like on this one though, is that the tank is small , that starts to refill right away and it's loud
Thank you for sharing👍
Thank you too
nice engine machine hanep!! tfs po
salamat
Thanks, great video. I just picked up this compressor a few days ago 😎👍
Nice 👍
Noisy. Thanks.
may I ask if you paint funiture among other objects? - thanks Fri-12/2021
sorry I haven't use it for painting, only nailing and stapling
This compressor is defective trash. Look up "Makita MAC5200 keeps shutting off" or "tripping reset" or variations. I had used mine for less than an hour when it stalled upon attempting to refill its tank and blew its own (not the household) circuit breaker. It turns out that this is a widespread occurrence with this model. I had it serviced under warranty. The only thing to attempt was replacing the check valve. After the repair I used the compressor for 10 minutes or so until it stalled and blew its circuit breaker again. It is topped up with oil and used in an extremely undemanding environment. This product is known to be fatally flawed and should have been pulled from the market years ago. Makita is banned from my shop now. AVOID.
Thanks for sharing!!
👍👍👍
Hm po yang ganyan machine boss?
Wow excellent unboxing with this very famous and powerful makita
Those quick couplers on the machine that come with the compressor will fail over time. Probably one and a little later, both. Just replace from the start with quality US made quick couplers.
Wow! awesome, thanks for sharing this video,stay safe and God bless 🙏
Thanks for visiting
Thanks for the overview. The directions that come with this is definitely not this detailed.
Thanks, glad it was helpful!
That is loud will be much louder if it was being used in a single or double car garage. Makita should have included ear protection since it has storage for it.