HOW TO START ANY SNOWBLOWER ~Learn About Your Engine - TIPS & TRICKS

แชร์
ฝัง
  • เผยแพร่เมื่อ 28 ส.ค. 2024
  • Many of my Customers ask me to Teach them.
    In this video I will show How to Start a few machines. I go over the basics.
    Learn more about your engine so you know why you do these tasks
    What is a choke?
    Why do you need to choke & when
    tips & tricks
    Stay tuned!

ความคิดเห็น • 20

  • @Big_Johns
    @Big_Johns 2 ปีที่แล้ว +1

    Nice informative video Arch, have Brandon go check your blinker fluid. 🙂

    • @TheNovaJohn
      @TheNovaJohn  2 ปีที่แล้ว +1

      LOL,,,Or send him for the "wire and pipe stretcher" !!!

    • @Big_Johns
      @Big_Johns 2 ปีที่แล้ว

      LoL.... heck yeah!!! 🤣🤣

  • @francislang5075
    @francislang5075 2 ปีที่แล้ว +2

    good teacher

    • @TheNovaJohn
      @TheNovaJohn  2 ปีที่แล้ว

      Thanx!!!

    • @Big_Johns
      @Big_Johns 2 ปีที่แล้ว

      Francis has it warmed up any your way?

    • @francislang5075
      @francislang5075 2 ปีที่แล้ว +1

      @@Big_Johns - 8 c here this morning and going to rain tuesday and then again snow storm on wed

    • @Big_Johns
      @Big_Johns 2 ปีที่แล้ว

      Brrrrrrrrrrrrr 🙈

    • @francislang5075
      @francislang5075 2 ปีที่แล้ว +1

      @@Big_Johns what is your weather

  • @johnnytugs1021
    @johnnytugs1021 2 ปีที่แล้ว +1

    Hey Arch, I have a Murray 5hp tecumseh alot like yours with the plastic kill key. One day it ran fine the next day wouldn't start. It had a very weak spark. You could feel it but not see it. I changed the coil but still no difference. Switched champion plug to NGK. Still No spark.
    Any suggestions

    • @TheNovaJohn
      @TheNovaJohn  2 ปีที่แล้ว

      Did you Gap the Coil .010 - 012? Remove the grounding wire from the coil. Where the key goes, remove the airbox too so you can see.Try That,,,good luck

    • @johnnytugs1021
      @johnnytugs1021 2 ปีที่แล้ว

      @@TheNovaJohn i cleaned the bottom of
      the coil and where the bolts go to the engine. I gapped it with a business card. I now have spark and it still wouldn't start.
      I put antouch of gas behind the plug and tried with a shot of ether too.

    • @TheNovaJohn
      @TheNovaJohn  2 ปีที่แล้ว

      @@johnnytugs1021 Sounds like a compression issue. I had one years ago with a stuck valve too. Do a compression test. At the very least, especially if you have electric start, pull the plug, put ya finger or thumb over the spark plug hole, when the engine is pulled over it will blow ya finger off.

  • @christopher6969
    @christopher6969 2 ปีที่แล้ว +1

    New friend here, full support for you👍🔔
    Full watch more than 2 minutes so my sub registers to you
    Great turorial👍

    • @TheNovaJohn
      @TheNovaJohn  2 ปีที่แล้ว

      Thanx,,,and thanx fer watchin!!