Si ese rifle es muy bonito , me gusta en 500mm para cacería caminando en El Monte .. el de 700mm sería más para mesa o tiro largos .. pero muy bonito rifle . Un abrazo
I have the V3 in .177, it is very nice, only a few negatives. 1: have to bleed bottle and gun if you want to reach regulator, fixed by installing FX hardware and bottle, but still loose a lot of air in big plenum. 2: have to take off stock to reach hammer spring adjustment, but it is same size hex key, so not a huge problem.
Yes I know . if you compare it with an impact you will always see it as more backward... but from one point of view they are a very good rifle for people who don’t know how to tun a rifle.. but the material is better than fx
@@Cazpesca I have a Maverick too, and a 2012 FX Cyclone. My Maverick was problematic at first, did not shoot well at speed, but Monster redesign pellets was like a laser at 575 FPS ( hammer wheel at MAX and factory 90 bar on the regulator) , but at 800 - 950 FPS they was bad, only good pellet at those speeds was the Beast. I have now changed from the 600 mm barrel to a 700 mm one, and now the Maverick shoot well at speeds and also with pellets, though i do mainly shoot slugs. It is true the FX Maverick and others you can soon mess up settings, but out of the box they should also shoot well, mine did just very slow and just 1 pellet model. The Vulcan 3 are much more forgiving in what pellets / slugs you feed it, and you can not easy mess up its settings as only the hammer adjustment are "easy" to access. People new to PCP airgun, getting a advanced gun, we can not urge strong enough to be very very careful in doing changes on regulators and hammer spring.
@@Cazpesca Yes, i shoot up and around 100 M with .177 13 grain, and it is very nice. Of course not grouping as it would at 50 M due to the always present winds in Denmark. But for sure you will not get me to sit behind a wall at the end of the 80 M range and stick out just my little nose, cuz there would be a good chance i would loose it then. Just got new shoot N C targets, this time in 2" size, which should be fine for most of the shots, and those outside will be visible on the cardboard backing. The Vulcan 3 with its 200 mm shorter barrel also do just fine on the 70 / 80 M range, i would have no problems trying it at 100 M too
uff excelente , me gusto para usarlo en 22 seria factible en taparete? Aun que en cuanto a su similud con el cricket es muy poca la diferencia el mismo cañon y casi todos los componentes similares
Boa noite amigo! Saudações do Brasil. Belíssima rifre pcp, parabéns. Uma pergunta que gostaria de fazer: Você testou chumbo slug na Vulcan 3 com o cano de 500mm. Foi bem o slug nela e qual voce utilizou. Obrigado
El rifle anda bien con 500mm para cacería . No necesita supresor .. Y si anda muy bien en el rango de la cacería 30 metros a los 80 90 metros . Un abrazo 🤗
Saludos y bendiciones animo y acia adelante amigo poco a poco hermano bendiciones
Vmssss amigooo connla ayuda de DIOS . Te felicito por el video saludos de argentina.
Tengo uno amigo un vulcan cal 25 cañón de 700 , es una belleza de rifle..saludos desde Ecuador 🇪🇨
Si ese rifle es muy bonito , me gusta en 500mm para cacería caminando en El Monte .. el de 700mm sería más para mesa o tiro largos .. pero muy bonito rifle . Un abrazo
Hola amigo muy lindo ese rifle ya también cazo en República Dominicana 🇩🇴
Ke máquina k dios te los deje gozar helmano,soy un ceguidor nuevo y me gusta las caza
Gracias por el Apollo 🙌
I have the V3 in .177, it is very nice, only a few negatives.
1: have to bleed bottle and gun if you want to reach regulator, fixed by installing FX hardware and bottle, but still loose a lot of air in big plenum.
2: have to take off stock to reach hammer spring adjustment, but it is same size hex key, so not a huge problem.
Yes I know . if you compare it with an impact you will always see it as more backward... but from one point of view they are a very good rifle for people who don’t know how to tun a rifle.. but the material is better than fx
@@Cazpesca I have a Maverick too, and a 2012 FX Cyclone.
My Maverick was problematic at first, did not shoot well at speed, but Monster redesign pellets was like a laser at 575 FPS ( hammer wheel at MAX and factory 90 bar on the regulator) , but at 800 - 950 FPS they was bad, only good pellet at those speeds was the Beast.
I have now changed from the 600 mm barrel to a 700 mm one, and now the Maverick shoot well at speeds and also with pellets, though i do mainly shoot slugs.
It is true the FX Maverick and others you can soon mess up settings, but out of the box they should also shoot well, mine did just very slow and just 1 pellet model.
The Vulcan 3 are much more forgiving in what pellets / slugs you feed it, and you can not easy mess up its settings as only the hammer adjustment are "easy" to access.
People new to PCP airgun, getting a advanced gun, we can not urge strong enough to be very very careful in doing changes on regulators and hammer spring.
@@pliashmuldba I had a maverick snipers with superior heavy liner and power kit .. shooting nsa slugs .217 27.5 laser.. very accurate..
@@Cazpesca Yes, i shoot up and around 100 M with .177 13 grain, and it is very nice.
Of course not grouping as it would at 50 M due to the always present winds in Denmark.
But for sure you will not get me to sit behind a wall at the end of the 80 M range and stick out just my little nose, cuz there would be a good chance i would loose it then.
Just got new shoot N C targets, this time in 2" size, which should be fine for most of the shots, and those outside will be visible on the cardboard backing.
The Vulcan 3 with its 200 mm shorter barrel also do just fine on the 70 / 80 M range, i would have no problems trying it at 100 M too
Did you put an FX valve in the AGT bottle? Please explain what you did exactly. Thanks
uff excelente , me gusto para usarlo en 22 seria factible en taparete? Aun que en cuanto a su
similud con el cricket es muy poca la diferencia el mismo cañon y casi todos los componentes similares
Si un éxito para taparete en 22
Saludo buenas tardes quiero hacerle una pregunta como usted pide eso rifle en qué página si me puede decir por favor
Boa noite amigo! Saudações do Brasil.
Belíssima rifre pcp, parabéns.
Uma pergunta que gostaria de fazer: Você testou chumbo slug na Vulcan 3 com o cano de 500mm.
Foi bem o slug nela e qual voce utilizou.
Obrigado
parabéns pelo video. vc ganhou mas um escrito. sou do brasil
Bonito rifle
Hey Orlando, qué tal? Mas o menos cuantos tiros haces con esa botella? Haste un video para ver la precisión a unos 60 u 80 metros. Saludos desde RD….👋
Gracias … cuando tenga esos datos te los daré .. pero creo que anda de 80 a 90 llenado a 300bar .. eso depende de la velocidad que le ponga ..
Olá amigo qual o peso dessa vulcan 3 cano de 500mm
7 1/2 síguem en mi otro canal de TH-cam orlando caza y pesca @orlandocazaypesca
Olá amigo ainda está com a Vulcan 3 de 500mm? Necessita de supressor? Será que vai bem nos 100 metros?
El rifle anda bien con 500mm para cacería .
No necesita supresor ..
Y si anda muy bien en el rango de la cacería 30 metros a los 80 90 metros . Un abrazo 🤗
@@Cazpesca Obrigado!
Olá amigo, saudações do Brasil 🇧🇷, você não quis pegar a 700mm? Será que muda muito para tiros a longa distância?
Si el 700mm es mejor para tiro de larga distancia .. pero para cacería caminando en los montes el 500mm es más cómodo ..
@@Cazpesca Obrigado Pela Resposta!
OLÁ AMIGO! DESCULPA INCOMODAR NOVAMENTE, SERÁ QUE CONSIGO UNS 70 OU 80 DISPAROS COM SLUG DE 25 GRAINS NA VELOCIDADE DE 290MS COM A VÁLVULA EM 130 BAR?
Claro que si .. consiguieras 70 o más disparo
@@Cazpesca Muito Obrigado! Abraços Do Brasil! 🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷
🇩🇴siempre a la orden 🫡
HOLA ORLANDO. SOY DE SANTIAGO, ES POSIBLE PEDIR POR INTERNET CUALQUIER RIFLE Y NO SER RETENIDO POR ADUANA GRACIAS
😂😂😂