This lock is only rated "klass 3" and it's for scooters and motorcycles, there is klass 4 and klass 5 also which a believe LPL can not pick. Here in Sweden many locks are certified by SBSC.
I finally bought myself a lockpick set off Amazon and have been trying it out on a few padlocks I had laying around. Apparently they're all unpickable.
The "key" to picking any lock is...practice, practice, & practice. Proper tensioning & feeling the feedback of a lock, can only be learned from experience. Keep trying & you'll get it!
John Larson Yeah, I’ve actually been able to open a couple, but not consistently. I’ll pick two or three times in a row then get stuck on it again. And one lock I’ve been able to rake open a few times, but I can’t pick it to save my life.
Luckily there is no way to mass produce the skills required to use the pick on these type locks. It takes so long to get good enough to open these locks and I'd argue that the talent required to get them open in the same speed as LPL is probably only attainable by the 1% of people who take up lock picking.
@@Quick_in_and_out Right. These cores are still quite good for most peoples' purposes, and as long as the lockmakers avoid putting in design flaws that allow people to bypass it, and put them inside of beefy lock bodies, they're well worth owning.
@@Quick_in_and_out Hell looking at how long it took LPL to pick this one even with him noticing things that an amateur would never even think of, I'd say this would be a good deterrent for any average burglar. Judging by the materials used the only viable attack would be a disc cutter and that would make it noisy enough for the lock to still have done its job perfectly.
Roughly two minutes of pick time is impressive when you're talking about someone who is highly skilled and has specialized tools on hand and is operating under ideal conditions.
It really isn't that difficult. The slop in the lock is what really helps these pickers. If everything was good and tight on the tolerances... It would be much much harder to pick. Almost impossible. If every piece was machined within .0001 tolerance you couldn't get it without a key. You have to think... With the slop in the tools, that slop directly connects to the slop in manufacturing. When they use a paper clip to open it... It's not even a lock lol. The disks in this video are stamped brass, if they used machined steel wafers they couldn't get it. Hell, you could laser cut them and have built a better core. i need to invent an un-pickable lock.
Yeah and especially given they are anything but cheap, with all these high-quality materials and mechanical complexity... LPL accepts only the finest of them all.
Good luck sourcing an Anchor Las, you can get one from securitysnobs and thats about it as far as I'm aware. They're pretty exclusive, excellent locks, well made and very secure. In the same bracket as Abloy. I'm after the 590-6 CEN6 a mere 225 bucks!👍😀😜
I'm German. I got RhinoBarbarians joke. And I get it if someone from another continent (yes, I assumed) mixes up some facts about European countries. So let me borrow a phrase from down under: no worries mate
You might want to change the [a] in your title to a [å] seeing as they a separate letters in swedish. Lås = Lock Las = abbreviation for Law of employee protection.
This lock is rated very good. I actually have to use this lock for my outside storage as it is one of the approved locks by my insurance company. Very nice to see it get a good approval.
When you are installing those disks they have a special number and a special pattern. If you look at the little nubb that's showing on all the disks. Btw. This is one of Sweden's most sold anchor locks sold in the world. Best regards a locksmith from Sweden
LPL and Bosnian Bill taught me everything I needed to know to pick the door lol on my hotel room in Amman. Turned out that the hotel gave me the only key to that door, so while they were desperately trying to find a solution l got it open. They were impressed!
Nah; unless you somewhere recorded your intention to commit a crime it shouldn't be admissable in court. I think. I'm not a lawyer. But LegalEagle is; you should check out his TH-cam channel.
Tom Herron+ Most of the EU have lock security requirements set by insurance companies. If the lock you want to use isn't on an approved list and rated for the insured risk, they deny your claim. I looked for Mater Lock padlocks on the Amazon UK site and the reviews I read indicate that the only people purchasing Master Padlock are lock sport pickers. The other reviews state, don't purchase to lock up anything you care about,
@@snarkylive It's sad to see people that stupid on the internet. I'd burn that NRA garbage toilet paper propaganda pamphlet if I were you instead of parroting it.
@@KuK137 yeah, people really don't seem to understand that property crime has financial motive. Most burglaries happen when the owner isn't even around... and firearms are some of the most valuable items to steal.
It's not Anchor Las - It is Anchor LÅS, as many others have pointed out. The one here is class 3, it's available in class 4 and 5 as well, model numbers 590-x
That ought to be a good lock. Anchor is a small Swedish producer of high quality, high cost locks. The simpler model without shackle protection is called 830-3 and costs around 90 US$. I have not found any price for 833-3, but it will surely be more expensive. On the other hand, you can expect the lock to last a lifetime and then some.
Cool, you've got an Anchor Las in your collection now. Jammy sod, those things are quite exclusive, hard to source only one place I know that sells them...securitysnobs. Anchor Las is on the same shelf as an Abloy in quality, strength and security. I'd love the Anchor Las 590-6 its their CEN 6 padlock...at $225 dreaming for now. Anyway, well done for picking that lock! 😀👍
I love how he burnt and unbaked a cake with 6. I applaud LPL for his ability to create an entertaining channel based on lock manipulation which isn't exactly action packed but once you understand it a little more you can be on the edge of your seat watching him pick a lock that employed magnets as an additional security measure. Well done sir.
This is the bad boy I have on my unit, I can sleep even better at night after watching this :) 2 minutes for a professional says that's gonna be unlikely your average tea leaf to be able to get through it.
@@lockpickinglawyer The last disc is actually there just to give the key tip a grip on the core, since disc detainer needs at least one 0 cut to work. I work alot with abloy locks, and newer ones also have 11 discs, where the oldest ones actually have only 10, and instead the top one, which nowadays is a spinner, was the 0 cut for the grip on the core, and the bottom of the core, which now holds the extra disc, instead was just a slot for the tip of the key. TL;DR: The 11th disc is just for tension
I work as a network engineer and was visiting a customer today to solve an issue they were facing. Sitting quietly peering into my terminal, finding how to solve the first half of the problem we had I muttered "I think we just had a nice click out of one..." and everyone around the table looked at me like I spoke words noone could understand. People don't understand problem solving the way it works inside my head these days.
First thing we're going to do is rotate all the disks clockwise as far as they will go- *Lock opens* And that's it for today. If you like our content, don't forget to subscribe, and as always.... Have a nice day
As always, great job. I do have a question: why do banks "drill" out safe deposit box locks when customer loses their key? Why not "pick" the lock by chaps like you? The keys look simple enough and the mechanism can't be that complicated. The locks aren't meant o be physically robust - they're in a controlled environment - so why not just "pick" them? I (we) await your answer.
Not sure about it but what is the point in preserving the integrity of a lock if all keys are lost? Starting from that premise I guess it's usually cheaper to just drill through the lock than paying an expert to actually pick the lock. As you said they're in a controlled environment, it's not as if they were stealing stuff where time and stealth are much more constraining.
So off topic from this video.....I recently watched your review of that Bangood cheap lock picking set. I took your advice and smoothed them out. I work in quality engineering at a huge mega factory. We have nothing but American locks all over the place. Well people lose keys all the time and we have to cut the shackles all the time. Well....I just picked my first lock!!! Your channel is amazing and this will help my company save money! Of course people end up finding their keys eventually so I can swap core between cut locks and missing key but eventually found key locks. lol.
Do you have any clear bodied practice disk locks? I don’t really understand how they work, would be nice to be able to see inside as you pick/unlock one.
"A bit of a challenge". That's what I heard you say. Well you started picking at 50 seconds and you are done picking at 2 minutes and 52 seconds so approximately 2 minutes to pick and get into whatever was of value. I would have saved myself the lock money and just wrapped a piece of coat hanger wire around a hasp to secure it. It would take you longer to either cut the wire or unwrap it than it did to pick this lock. You are amazing!
Bear in mind, that's two minutes of picking by one of the world's most skilled lockpickers, using a highly specialized custom made tool, under ideal conditions, AFTER he has done research and practice runs. Honestly that's kinda impressive. The average thief would not be able to do this, they'd try to force the lock or just try to break or bypass the door, instead.
I now saw several trays for pinnings, but they all cover the standard core design with two pins, a spring and maybe some master wavers. I'm a bit curious why there are no pinning trays for Disc Detainer locks yet ...
Hey LPL. I tossed this at Bill too. Ive not seen anyone use oscillating tools against locks. Like yeah there are electric picks that are essientially mini oscillating tools, but i mean full size power tool oscillating cutter type things. I think they might be successful against various locks used in various ways.
We need to make a action movie with all the best voices in acting like Morgan Freeman and Jeff Goldblum, LPL can show off his skills and can continue to be a disembodied voice.
I thought all of Anchors locks used Scandinavian oval cylinders, and not their own cores. Color me surprised. Note: The "-3" at the end of the designation means it is a class three on the 5-degree national Swedish scale. Level 3 is the highest anyone would normally go on a home or for example on a motorcycle. Class 4 and 5 is only really used in for example military installations or other very high security applications.
Picking the lock in less than a minute, still consider it to be a lock he would choose. Bloody hell. I envy your skills, Sir, and I salute you! I have four of these, they cost well over $100 each. A bit unsettling to see that they were so "easy" to pick. :/
What a coincidence, I'm a Swede and I noticed this was uploaded on my birthday, wow! I usually don't bring attention to it if I notice that a video has been uploaded on my birthday, but in this case I couldn't help it x3
If one watches LPL or BB videos from just a few years ago, you will see them talking about how they can't pick a lock of this design and how you could count on both hands the number of people in the world with that skill. I would suggest that this is a wonderful lock for 99.9% of consumers.
The shape of the disks (half moon) is because the key only has bitting on one side so those cutouts give the other side of the key somewhere to fit otherwise the back side of the key would turn the disks instead of the bitting.
I'm happy that you took it apart. I know you said "and of course I will take it apart," but we really can't take it for granted anymore. You really don't take apart almost any lock anymore, even the really interesting ones. I can understand why, but it's still not a given.
![[1453] VERY Clever “Loki” Puzzle Padlock Solved](http://i.ytimg.com/vi/OFvTzppfJnA/mqdefault.jpg)
![[1453] VERY Clever “Loki” Puzzle Padlock Solved](/img/tr.png)
![[576] LoboJack HS-21 Hidden Shackle Padlock Picked](http://i.ytimg.com/vi/KoIsJohXoLY/mqdefault.jpg)
![[919] Prison Break! Huge Prison Locks Opened in Seconds](http://i.ytimg.com/vi/dleQ_bcbMJo/mqdefault.jpg)
![[1591] The Replicant: Pocket Key Casting Perfected!](/img/n.gif)
I can see Anchor's advertising now. "Not a bad lock... Probably a lock that I would consider using" - LPL
I mean it's quite high praise. "Not a bad lock... Probably a lock that would consider using" LockPickingLawyer (Expert Lockpicker)
LPL's "Not a bad lock" is roughly equivalent to any other product review getting 8 stars out of 5.
He still doesn't need a key for it...
This lock is only rated "klass 3" and it's for scooters and motorcycles, there is klass 4 and klass 5 also which a believe LPL can not pick. Here in Sweden many locks are certified by SBSC.
I would advertise with that. LPL runs a thieves guild.
“A pick that i would consider using”
Anchor Lås: STONKS!
*stönks*
I'm buying these locks so stonks is right
I finally bought myself a lockpick set off Amazon and have been trying it out on a few padlocks I had laying around. Apparently they're all unpickable.
The "key" to picking any lock is...practice, practice, & practice. Proper tensioning & feeling the feedback of a lock, can only be learned from experience. Keep trying & you'll get it!
John Larson Yeah, I’ve actually been able to open a couple, but not consistently. I’ll pick two or three times in a row then get stuck on it again. And one lock I’ve been able to rake open a few times, but I can’t pick it to save my life.
Buy some masterlocks
Spiff; You are not cut out for it, also yourt destiny lies elsewhere, you mut become a chocolatier, or a rodeo.
That my friend, was funny.
LPL: Recommends 2 disk detainer locks in a row
Also LPL: Working with Sparrows to mass produce a pick for said locks
It's a conspiracy. Aaaaaaaaaaaah. Where is my tin foil?
Luckily there is no way to mass produce the skills required to use the pick on these type locks. It takes so long to get good enough to open these locks and I'd argue that the talent required to get them open in the same speed as LPL is probably only attainable by the 1% of people who take up lock picking.
@@Quick_in_and_out Right. These cores are still quite good for most peoples' purposes, and as long as the lockmakers avoid putting in design flaws that allow people to bypass it, and put them inside of beefy lock bodies, they're well worth owning.
@@Quick_in_and_out Hell looking at how long it took LPL to pick this one even with him noticing things that an amateur would never even think of, I'd say this would be a good deterrent for any average burglar. Judging by the materials used the only viable attack would be a disc cutter and that would make it noisy enough for the lock to still have done its job perfectly.
@@Quick_in_and_out OCCUPY LOCKPICKING!
Roughly two minutes of pick time is impressive when you're talking about someone who is highly skilled and has specialized tools on hand and is operating under ideal conditions.
@Hell's favorite Salty Masshole what
Absolutely... under non ideal conditions it would take him at least an additional 3 seconds.
A lock that I would consider using. Must be damn good. This Lock is now one of the few chosen ones.
If it takes LPL this long theres few people who can open it at all. And it looks quite sturdy.
It is worthy
And no BS about being unpickable, just a good lock
Imagine being a lock and hearing "this is the lock picking lawyer" 😔
F
Im gonna get some action with his tools tonight!
Why do i hear boss music?
😳😳😳
Even worse is when you then hear "Let's take this to the garage"
"Disk detainer...10 disks...each with false gates..."
Me: good lord that sounds completely impossible
LPL 2 mins later:
"Looks like I was wrong, looks like there are 11 disks... "
Also LPL: "One lock I'd consider using"
@@averagesongcontestan So the 11th disc just surrendered. :)
"*Disc*"
TheNoobPolice no, disk is correct
First Swedish lock I see him pick. First lock I hear him recommend. Gives a sense of pride. :)
Hehehe, mycket riktigt. Våra saker äro av kvalité!
@@moseskfrost "äro", dog av skratt. Kung é du
@@fisfisarenskanal Ha-ha, tackar. Ja, jag använder fortfarande våra arkaiska verbformer, tro det eller ej. ;-)
Rösta SD
2 minutes? Thats a solid lock!
2 minutes by (of) the most experienced disc detainer picker(s) in the world with the most specialized tool in the world.
@@tomhejda6450 Yeah! I said the same thing.
LpL not your average lock picker I would wager that there are only a handful people that could pick that lock that fast
WOW LOCK VERDICT
It really isn't that difficult. The slop in the lock is what really helps these pickers. If everything was good and tight on the tolerances... It would be much much harder to pick. Almost impossible. If every piece was machined within .0001 tolerance you couldn't get it without a key. You have to think... With the slop in the tools, that slop directly connects to the slop in manufacturing. When they use a paper clip to open it... It's not even a lock lol. The disks in this video are stamped brass, if they used machined steel wafers they couldn't get it. Hell, you could laser cut them and have built a better core. i need to invent an un-pickable lock.
Man another lock he would use! Guess I'm going broke this week...
Yeah and especially given they are anything but cheap, with all these high-quality materials and mechanical complexity... LPL accepts only the finest of them all.
Good luck sourcing an Anchor Las, you can get one from securitysnobs and thats about it as far as I'm aware. They're pretty exclusive, excellent locks, well made and very secure. In the same bracket as Abloy. I'm after the 590-6 CEN6 a mere 225 bucks!👍😀😜
It will be worth it.
@@claudiodiaz9752 depends what you are locking up and where it is, it may well be worth it, just as much as it could be not at all worth it.
Anchor Las Grade 4, 60mm x 28mm Shackle Hardened Steel Shouldered Padlock (833-3 B28) £95.57 INC VAT
"This Swedish lock was sent to me by Hans Christian in German."
Fitting since unpickable locks are a fairy tale.
Wrong countries.
To complement the above, if you were thinking of Hans Christian Andersen, he was Danish. The Brothers Grimm were German.
I'm German. I got RhinoBarbarians joke.
And I get it if someone from another continent (yes, I assumed) mixes up some facts about European countries.
So let me borrow a phrase from down under: no worries mate
@@al1rednam
Okay, the joke was about the guy's name, not where he was from. I was fully aware HCA was Danish and that the Brothers Grimm were German.
Is there anyone else here who has no idea how to pick a lock but is just fascinated by the concept and loves hearing him explain it? Yeah, me too
I'm just here for the comments. :D
As a former locksmith I am in awe of your picking skills. You´re a beast! :)
You might want to change the [a] in your title to a [å] seeing as they a separate letters in swedish.
Lås = Lock
Las = abbreviation for Law of employee protection.
How do you do that... cicle-a thing?
GreatgoatonFire
I dont Think anyone cares
@@sonarbuge7958 mean
@@sonarbuge7958 Seeing as I've gotten 83 upboats I wouldn't bet on that.
Well he is the Lock Pick [Lawyer]
LPL, the only man alive who is able to pick 11 disks instead of 10 without noticing the extra 1.
Honestly amazing how long it took , this is a solid contender for the best in its range.
This lock is rated very good. I actually have to use this lock for my outside storage as it is one of the approved locks by my insurance company. Very nice to see it get a good approval.
A rare nod of approval from LPL.
"This is a lock I would bother find the key instead of picking every day".
"I'm sure that's an anti-pick design, but it didn't seem to affect me much..."
So nice being a Swede, seeing how good the lock made me a teensy bit proud
When you are installing those disks they have a special number and a special pattern. If you look at the little nubb that's showing on all the disks.
Btw. This is one of Sweden's most sold anchor locks sold in the world.
Best regards a locksmith from Sweden
"That's some sort of anti pick design"
*AFTER PICKING IT*
"I guess they tried to stop me, I just didn't notice"
That half moon is just the easiest way for the key to grab and rotate the discs. All the trickery is on the outside of the discs.
Thank you for sharing your skills I learned so much from you and Bosnian bill in the past year...
I'm very appreciative
If I’m ever a suspect for a robbery, my youtube history will surely put me behind bars. Well at least i have some knowledge on how to pick my way out
LPL and Bosnian Bill taught me everything I needed to know to pick the door lol on my hotel room in Amman. Turned out that the hotel gave me the only key to that door, so while they were desperately trying to find a solution l got it open.
They were impressed!
Nah; unless you somewhere recorded your intention to commit a crime it shouldn't be admissable in court. I think. I'm not a lawyer.
But LegalEagle is; you should check out his TH-cam channel.
Wow! you can pick bars!?
Kudos to the contributor! ‘a lock I would consider using myself’ - must have a smile like a Cheshire Cat 🐱
Europe gets all the cool locks. We’ve got Master.
Mastersux
Tom Herron+
Most of the EU have lock security requirements set by insurance companies. If the lock you want to use isn't on an approved list and rated for the insured risk, they deny your claim.
I looked for Mater Lock padlocks on the Amazon UK site and the reviews I read indicate that the only people purchasing Master Padlock are lock sport pickers. The other reviews state, don't purchase to lock up anything you care about,
European supermarkets and hardware stores are filled with junk locks. Trust me there are a lot very bad (and cheap) locks.
@@snarkylive It's sad to see people that stupid on the internet. I'd burn that NRA garbage toilet paper propaganda pamphlet if I were you instead of parroting it.
@@KuK137 yeah, people really don't seem to understand that property crime has financial motive. Most burglaries happen when the owner isn't even around... and firearms are some of the most valuable items to steal.
It's not Anchor Las - It is Anchor LÅS, as many others have pointed out. The one here is class 3, it's available in class 4 and 5 as well, model numbers 590-x
Two endorsements in a row?!? You feeling ok LPL?
That ought to be a good lock. Anchor is a small Swedish producer of high quality, high cost locks. The simpler model without shackle protection is called 830-3 and costs around 90 US$. I have not found any price for 833-3, but it will surely be more expensive. On the other hand, you can expect the lock to last a lifetime and then some.
I picked my 833 up for £80 it was up for £100 But my haggling skills surpass my picking skills lol
Middle of the night: *Little click outta 1*
Me: Yo did you hear something?
*Nice click outta 5*
Me: Welp
Bosnian Bill, keep those guns ready, the lock is open!
What does "welp" mean? I see it a lot recently.
@@martinhodge921 a sign of resignation
Lmao
lol funny!😜
Cool, you've got an Anchor Las in your collection now. Jammy sod, those things are quite exclusive, hard to source only one place I know that sells them...securitysnobs. Anchor Las is on the same shelf as an Abloy in quality, strength and security. I'd love the Anchor Las 590-6 its their CEN 6 padlock...at $225 dreaming for now. Anyway, well done for picking that lock! 😀👍
And here, we see the lion, opening up its prey after a successful kill.
Oh dear god, it's horrifying
I love how he burnt and unbaked a cake with 6.
I applaud LPL for his ability to create an entertaining channel based on lock manipulation which isn't exactly action packed but once you understand it a little more you can be on the edge of your seat watching him pick a lock that employed magnets as an additional security measure. Well done sir.
Nice clear fingerprint on that lock body at the end. :)
I like how the shade of your skin acts like the heat map of the pressure you're putting on the lock and pick, finger nails tell a lot too
Svensk kvalitet!
Absolut!
Stämmer!
Man blir stolt!! 💪🇸🇪
För Sverige i tiden!
Bra skit
Its a pleasure to watch your finesse and gentle dexterity.
LPL, can you show me how to pick my way into her heart?
Antony A.V Did you start by turning all her discs as far clockwise as they will go?
@@RiggidyNick 🤣🤣🤣 Saw that coming but still LMAO! 😂
you don't need to pick it. the key is on the front of your debit card.
@Hyperbeeno , Was on Valentines day.
Use top of the key way tension
I just discovered this channel yesterday and I can't stop watching this videos. Someone please help me
You're ... locked in! Oh, is that my coat?
(And this guy's a lawyer, don't even think of the consequences of leaving :)
For 1000 videos you should unlock an unpickable lock
He has done plenty of unpickable locks, and shown a few true unpickable locks and shown why they are impossible to pick in the gutting
But is there such a thing though?
@@demonsrun3281 care to link to the true unpickable locks ?
th-cam.com/video/qV8QKZNFxLw/w-d-xo.html
@Candyman video 636
This is the bad boy I have on my unit, I can sleep even better at night after watching this :) 2 minutes for a professional says that's gonna be unlikely your average tea leaf to be able to get through it.
I started sweating when LPL took more than 1 minute to pick the lock
I didn't start sweating..... LPL's voice is just so calming!
that tool these guys have made likely has the industry sweating a little bit.
"It's a tricky pick" "I'd considert using it"
Damn, very high praise!
*_confused_* 11 discs? LSL picked 10 - so the 11th recognized it had no chance and surrendered?
Gerd Kah 😂😂😂 It was a 0 cut... when I rotated all the discs in the beginning, I set it.
@@lockpickinglawyer The last disc is actually there just to give the key tip a grip on the core, since disc detainer needs at least one 0 cut to work.
I work alot with abloy locks, and newer ones also have 11 discs, where the oldest ones actually have only 10, and instead the top one, which nowadays is a spinner, was the 0 cut for the grip on the core, and the bottom of the core, which now holds the extra disc, instead was just a slot for the tip of the key.
TL;DR: The 11th disc is just for tension
I work as a network engineer and was visiting a customer today to solve an issue they were facing. Sitting quietly peering into my terminal, finding how to solve the first half of the problem we had I muttered "I think we just had a nice click out of one..." and everyone around the table looked at me like I spoke words noone could understand. People don't understand problem solving the way it works inside my head these days.
First thing we're going to do is rotate all the disks clockwise as far as they will go-
*Lock opens*
And that's it for today. If you like our content, don't forget to subscribe, and as always....
Have a nice day
Yours faithfully, Master
That'll be a fun April 1 joke for someone to send him as a challenge lock: High end disc detainer with all 0 discs.
and ..... you left your thumbprint clearly on that lock for the whole world to see. good job.
As always, great job. I do have a question: why do banks "drill" out safe deposit box locks when customer loses their key? Why not "pick" the lock by chaps like you? The keys look simple enough and the mechanism can't be that complicated. The locks aren't meant o be physically robust - they're in a controlled environment - so why not just "pick" them? I (we) await your answer.
Most likely cheaper to just drill it out. The lock will have to be replaced anyhow.
Good question
Can't have someone on the outside who know how to open the safes? They might teach others?
Probably saves time to keep a drill on hand, and drill it quickly.
Not sure about it but what is the point in preserving the integrity of a lock if all keys are lost? Starting from that premise I guess it's usually cheaper to just drill through the lock than paying an expert to actually pick the lock. As you said they're in a controlled environment, it's not as if they were stealing stuff where time and stealth are much more constraining.
I like your voice. Half the reason I watch these
I had a nightmare, just me in front of my door and hearing the words on the other side: "Nothing on one, two is binding....
Why try to steal credit from the reddit post?
When I was in Russia, I noted all the residents in the provincial areas, have Swiss locks. Love to see you pick a Swiss lock, thanks!
Oh no you didn't 😆 Swedish != Swiss
6 minute LPL video and YOU KNOW something has gone terribly right for the lock maker.
So off topic from this video.....I recently watched your review of that Bangood cheap lock picking set. I took your advice and smoothed them out. I work in quality engineering at a huge mega factory. We have nothing but American locks all over the place. Well people lose keys all the time and we have to cut the shackles all the time. Well....I just picked my first lock!!! Your channel is amazing and this will help my company save money! Of course people end up finding their keys eventually so I can swap core between cut locks and missing key but eventually found key locks. lol.
*Villagers in Minecraft should use this*
to keep themselves safe from a Random Swedish guy kidnapping them using a boat
XD
AnderZEL does not kidnap. He cajoles.
"I'm anticipating a bit of a challenge." Picks lock in just over two minutes. Dude is scary good at this.
A lock that even LPL is struggling with?
*I'll take your entire stock!*
Hello from Sweden! Happy too see some of our locks are OK 👌😅
You should try 590-6 thats their klass 5 with extremely high security this is a klass 3
LPL I'm not sure if it's just me but I think showing the mechanism working with the key a couple times before you pick is weirdly satisfying
Do you have any clear bodied practice disk locks? I don’t really understand how they work, would be nice to be able to see inside as you pick/unlock one.
There are TH-cams on them, but very simple locks even a beginner can pop.
Banggood have cheap clear locks of all kinds.
It is so much fun watching these videos. Just keeping honest people honest.
Lås means lock in Swedish, so the text on the lock says "Anchor Lock"
Another hungarian in sweden :D
Riiight mister Blond? :)
@@vibraloop indeed :)
"A bit of a challenge". That's what I heard you say. Well you started picking at 50 seconds and you are done picking at 2 minutes and 52 seconds so approximately 2 minutes to pick and get into whatever was of value. I would have saved myself the lock money and just wrapped a piece of coat hanger wire around a hasp to secure it. It would take you longer to either cut the wire or unwrap it than it did to pick this lock. You are amazing!
Bear in mind, that's two minutes of picking by one of the world's most skilled lockpickers, using a highly specialized custom made tool, under ideal conditions, AFTER he has done research and practice runs.
Honestly that's kinda impressive. The average thief would not be able to do this, they'd try to force the lock or just try to break or bypass the door, instead.
"I am anticipating a challenge" *looks at video length ( I disagree )
Go figure that the Swedish lock needs an Alan key for disassembly.
Why? Its an IKEA-key.
we like alankeys
Whew what is it about this guy's voice that is so relaxing. Sheesh if it wasn't for ads I'd sleep to these.
4:10 "Not sure why there was the half-moon shape, because I DON'T GIVE A FUUUUUUUUUUUUUUUUUUUUUUUUUUU**!!"
Pretty sure the half moon is to make it easier to insert a key when the discs are out of place. Proof that the LPL never uses keys :D
Ask and ye shall receive. Sweet this is just what I wanted to see. German lock. lots of discs and false gates. Excellent. I am entertained sir.
Are you also able to pick Abloy protec2 core? Want to see that :)
Do you need to find out how to pick it for a job?
I love these videos, so interesting. So much so that I've ordered a noob kit to see if it's a hobby for me. Thanks LPL
Imagine beeing his wife and hearing: this is the lock picking lawyer...
She must be a very lucky woman...
Wow, that was an impressively quick pick, also beautifully made tool
What is the tray for gutting locks called?
Pinning tray iirc
Pinning tray
Thanks!
Here's a couple to look at if you're interested ;-)
www.sparrowslockpicks.ca/product_p/new4.htm
www.sparrowslockpicks.ca/product_p/sparrowsmat.htm
I now saw several trays for pinnings, but they all cover the standard core design with two pins, a spring and maybe some master wavers.
I'm a bit curious why there are no pinning trays for Disc Detainer locks yet ...
This channel is a true triumph of the human spirit. Yes, LPL, you may quote me on that.
A video that's longer than 2 min... Wait a minute... What have you done with the real LPL?!
Sorry im new here but can you explain what you mean by that thanks
@@Musawick Given how fast he picks most consumer grade locks, above 2 minutes means this core is way above average in terms of pick resistance.
@@johnathanmcdoe thanks
Just got the notification, and already 35,000 views.
LPL is an Icon!
"I'm anticipating a bit of a challenge"
2 minutes later
Open
Hey LPL. I tossed this at Bill too. Ive not seen anyone use oscillating tools against locks. Like yeah there are electric picks that are essientially mini oscillating tools, but i mean full size power tool oscillating cutter type things. I think they might be successful against various locks used in various ways.
"it didn't seem to affect me very much" totes. can't stop laughing
That picking device is the 😈
We need to make a action movie with all the best voices in acting like Morgan Freeman and Jeff Goldblum, LPL can show off his skills and can continue to be a disembodied voice.
Always enjoy watching your work. Thanks again.
Interesting pick, never saw u use this much strategy and explain it so detailed!
I have a masters in Engineering, and am completely lost, luv this channel....
I thought all of Anchors locks used Scandinavian oval cylinders, and not their own cores. Color me surprised. Note: The "-3" at the end of the designation means it is a class three on the 5-degree national Swedish scale. Level 3 is the highest anyone would normally go on a home or for example on a motorcycle. Class 4 and 5 is only really used in for example military installations or other very high security applications.
Excellent pronunciation of lås :)
Picking the lock in less than a minute, still consider it to be a lock he would choose. Bloody hell.
I envy your skills, Sir, and I salute you!
I have four of these, they cost well over $100 each. A bit unsettling to see that they were so "easy" to pick. :/
He sounds like my dentist. "10 is binding.. 2 feels loose"
What a coincidence, I'm a Swede and I noticed this was uploaded on my birthday, wow! I usually don't bring attention to it if I notice that a video has been uploaded on my birthday, but in this case I couldn't help it x3
These locks really have special picks . Wow!!!!!
If one watches LPL or BB videos from just a few years ago, you will see them talking about how they can't pick a lock of this design and how you could count on both hands the number of people in the world with that skill. I would suggest that this is a wonderful lock for 99.9% of consumers.
Someone send this man a completely clear crazy lock so he can pick it with this and show us what's happening
Finally some good LPL recommends for being a good padlock, congrats to the maker
The shape of the disks (half moon) is because the key only has bitting on one side so those cutouts give the other side of the key somewhere to fit otherwise the back side of the key would turn the disks instead of the bitting.
Greetings from Sweden 🇸🇪🇸🇪🇸🇪
I'm happy that you took it apart. I know you said "and of course I will take it apart," but we really can't take it for granted anymore. You really don't take apart almost any lock anymore, even the really interesting ones. I can understand why, but it's still not a given.
Everybody's impressed with his lockpicking skills, but I'm more impressed that he owns an entire side of the Atlantic Ocean.