I need to do some more 3x110mm skating on my Endless frames. I have been mainly using them for 4x90. I didn't read their instructions well and found that my 110mm urban profile wheels didn't fit. I now have some speed-profile 110mm to use on them. Glad you are enjoying the frames!
It depends very much on your type of skating, which setup you'll skate most. 3x110 is great for working out, which I enjoy after a long day in the office. Your urban profile wheels might fit one day, after you've used them on different skates or frames for a while :D
I enjoy 3-wheel skating too. Great review to find. I ordered mine through the endless site recently after watching your review. The trinity 3-mounting point + endless tech looks like a good idea.
Hi. Glad to hear, that the review helped and you're happy with the decision. I don't regret it either and look forward to skating this setup again after the winter. Currently, I spend most of my time on offroad and rain wheels in the rain, wind and darkness - not ideal for filming :D
Prima Review! Das sieht nach einer endlos rollenden Harmonie zwischen Schuh und Rahmen aus... da haben die Vögel im Hintergrund sicher nach ein paar Zugaben verlangt:) Beste Wandersockengrüße und Happy Skating!
Dankeschön, liebe Wandersocken. Ja, was man an den Füßen trägt, darf sich keinesfalls irgendwie akustisch oder bezüglich Komfort unangenehm bemerkbar machen. Davon könnt Ihr sicher auch ein Lied singen :D Fröhliches Wandern und einen sonnigen Spätsommer mit viel Gelegenheit dazu.
Hi !! 1:04 I have the same problem on my Endless 90/110 with RB Hydrogen 110m... the wheels make a bouncing noise, it is not pleasant at all. They are equipped with WICKED (Abec9) bearings and and standard Spacers... Where did the problem come from for you?
Hello. Unfortunately I couldn't figure out the exact source of the noise. Maybe the bearings, maybe the spacers or the wheels - probably the combination of all three items. Little imprecisions in any of the cheaper components can add up and cause gaps. A stiff, precisely-manufactured frame cannot close them, even if you tighten up the screws as much as you can. The higher quality wheels might have solved the problem for me. I still use them with cheap (but different) bearings and spacers.
Thank you, I totally forgot to mention: they don't have a rocker and will hopefully remain flat for a while, depending on the durability of the wheels :D
For what you love doing, this 3x110 is much better suited for you 😉. So strange about the Supreme wheels. I actually hold them in pretty high regard. maybe the bearings and spacer were the issue? Anywho, I don't think you would have been the same skater you are today if you had these frames from the get-go. It's like the story of the warrior who wished to jump higher than anyone else. So he started putting weights and rocks on him and he learned how to jump good like that. After years of practice he takes the rocks down and then he becomes the greatest warrior, in your case, witch 😏, that ever existed. So, you should definitely cherish your past skate setups because they refined you and the moves that you will be doing using the Endless 😎
That was one beautiful and encouraging parable. Thank you Wheeler. I definitely don't regret anything and my past setups still have their advantages, like the 125mm wheels for rough asphalt. Even the Supreme wheels might be great for something, once I found the right spacer and bearing combo :D
When its cold and rainy I sometimes revisit clips from you to get in a good mood! It worked again this time! :) Can you please recommend any good webshop selling the G13 Matter (84a) wheels at a good price?
Glad to hear that :D It's gotten cold and rainy here as well in the meantime. I bought my Matter wheels at this German Skateshop www.der-rollenshop.de, but I'm not sure, if the price is still good, if they have to ship them abroad.
I don't have much experience with other wheels apart from the Big storm surge rain wheels by MPC, which are great, and the undercover 90mm 85A. Also nothing to complain about.
The axel looks 6mm, but i am guessing its 8mm. What size is your boot? just so that i can compare the frame length to my own boot (mine is 43/44) rather than just think of the frame length. Your so lucky to have that nice long freshly surfaced smooth road to skate.. i bet that was good. nice outtake at the end. haha. least it wasnt close up. Take care all the best.
I haven't measured them, but it's still the same axles I used for the 4x90mm setup. The black ones, which came with the frames. My boot is size 39 (EU). Good idea to keep the boot frame ration in mind as well. In regards to paved bike trails we're lucky here, that the federal state covers about 80 percent of the building costs, which is a huge incentive for the counties and towns to build them. That outtake is a few seconds of the real me :D I hope it helped at least to scare the advertisers away (edit: just checked, unfortunately it didn't) It sucks that the ads pop up now just about everywhere, even on small channels.
@@WitchonWheels I didn’t see any ads on your video ( however my laptop has started cutting the ads short so they only pop up for 1 second) I don’t know why it’s started doing that. my phone still plays ads until “skip” appears There is supposed to an initiative here to build a network of cycle paths, that is going to start soon. There are only 2 near here one goes through a park ( about 800m long) and the other is down a long hill next to a road and ends abruptly where the road intersects. Quite steep as well and only 1m wife. Take care All the best
@@klisher Finally a useful bug in the software :D Same here with steep downhills. They always end either at an intersection or in a curve hidden from view. Have a great weekend.
I haven't skated all, not even most of the wheels available on the market. When I asked the staff of the skate-shop for the best wheels for my specific purpose (long distances on partly rough asphalt), they recommended these wheels and I was most pleasantly surprised :D
Your Supreme wheels are fine, you just need some other spacers. Its a normal problem not every spacer fits to every bearings and wheel kombo. Viele Grüße 😉
Here comes the hard question I've avoided so far :D It very much depends on the type of skating. I mainly skate for working out after long days of mostly sitting in the office. Therefore, you'll probably see more videos with the 3x110mm flat version, which does not mean, however, that I don't enjoy the 4x90 rockered setup just as much, whenever I mount it.
![ค้าง (STILL) - GEMINI [ OFFICIAL MV ]](http://i.ytimg.com/vi/Ftxx3hk5vkU/mqdefault.jpg)
![ILLSLICK X YOUNGOHM - We're The same [Official Video]](http://i.ytimg.com/vi/yUJNkobYR0E/mqdefault.jpg)
You can also do 3x100 on these frames. I use the Endless 90 LR with the 3x100 configuration. They are Low Rider so they are too low for 3x110.
Good idea and a great option to reuse my 100mm wheels - though they might be down at 90 by now :D
@@WitchonWheels let us know if you try out the 3 x 100. And what you think 😜
Very Nice video! The difference between the wheels was so interesting to see, nice riding !!
Thanks Isaac. Varying wheels keep it interesting :D
I need to do some more 3x110mm skating on my Endless frames. I have been mainly using them for 4x90. I didn't read their instructions well and found that my 110mm urban profile wheels didn't fit. I now have some speed-profile 110mm to use on them. Glad you are enjoying the frames!
It depends very much on your type of skating, which setup you'll skate most. 3x110 is great for working out, which I enjoy after a long day in the office. Your urban profile wheels might fit one day, after you've used them on different skates or frames for a while :D
Thanks for the nice review and what a beautiful place to skate ! You make me want to try out the 3 x 110 setup of my endless as well now..
Very much appreciated. The 3x110 option has become one of my favorite setups, which I can only recommend. Who would have thought 😄
“A bit of a diva” 😂 I love it
;)
I enjoy 3-wheel skating too. Great review to find. I ordered mine through the endless site recently after watching your review. The trinity 3-mounting point + endless tech looks like a good idea.
Hi. Glad to hear, that the review helped and you're happy with the decision. I don't regret it either and look forward to skating this setup again after the winter. Currently, I spend most of my time on offroad and rain wheels in the rain, wind and darkness - not ideal for filming :D
Prima Review! Das sieht nach einer endlos rollenden Harmonie zwischen Schuh und Rahmen aus... da haben die Vögel im Hintergrund sicher nach ein paar Zugaben verlangt:) Beste Wandersockengrüße und Happy Skating!
Dankeschön, liebe Wandersocken. Ja, was man an den Füßen trägt, darf sich keinesfalls irgendwie akustisch oder bezüglich Komfort unangenehm bemerkbar machen. Davon könnt Ihr sicher auch ein Lied singen :D Fröhliches Wandern und einen sonnigen Spätsommer mit viel Gelegenheit dazu.
Hi !! 1:04 I have the same problem on my Endless 90/110 with RB Hydrogen 110m... the wheels make a bouncing noise, it is not pleasant at all. They are equipped with WICKED (Abec9) bearings and and standard Spacers... Where did the problem come from for you?
Hello. Unfortunately I couldn't figure out the exact source of the noise. Maybe the bearings, maybe the spacers or the wheels - probably the combination of all three items. Little imprecisions in any of the cheaper components can add up and cause gaps. A stiff, precisely-manufactured frame cannot close them, even if you tighten up the screws as much as you can. The higher quality wheels might have solved the problem for me. I still use them with cheap (but different) bearings and spacers.
Great review and gorgeous frames! Does the 3x110 set up not have the rocker to them? I don’t think you mentioned if they did.
Thank you, I totally forgot to mention: they don't have a rocker and will hopefully remain flat for a while, depending on the durability of the wheels :D
For what you love doing, this 3x110 is much better suited for you 😉. So strange about the Supreme wheels. I actually hold them in pretty high regard. maybe the bearings and spacer were the issue?
Anywho, I don't think you would have been the same skater you are today if you had these frames from the get-go. It's like the story of the warrior who wished to jump higher than anyone else. So he started putting weights and rocks on him and he learned how to jump good like that.
After years of practice he takes the rocks down and then he becomes the greatest warrior, in your case, witch 😏, that ever existed. So, you should definitely cherish your past skate setups because they refined you and the moves that you will be doing using the Endless 😎
That was one beautiful and encouraging parable. Thank you Wheeler. I definitely don't regret anything and my past setups still have their advantages, like the 125mm wheels for rough asphalt. Even the Supreme wheels might be great for something, once I found the right spacer and bearing combo :D
When its cold and rainy I sometimes revisit clips from you to get in a good mood! It worked again this time! :) Can you please recommend any good webshop selling the G13 Matter (84a) wheels at a good price?
Glad to hear that :D It's gotten cold and rainy here as well in the meantime. I bought my Matter wheels at this German Skateshop www.der-rollenshop.de, but I'm not sure, if the price is still good, if they have to ship them abroad.
Genia!! 🇦🇷
Thank you :)
What other wheels do you like other than the Matter ones you mentioned?
I don't have much experience with other wheels apart from the Big storm surge rain wheels by MPC, which are great, and the undercover 90mm 85A. Also nothing to complain about.
I have the same problem of loose noisy Supreme wheels on my Endless 90/110 frames. It's so annoying.
I agree, this skate-wheel-combination sucks. A wheel upgrade might be the solution for you as well.
@@WitchonWheels I switched to Hydrogen wheels and no longer have the problem.
@@nomadicnewbie That's great. I'll keep this in mind.
I know you're a three wheel skater, but which set up did you enjoy the most and for what reasons?
The axel looks 6mm, but i am guessing its 8mm. What size is your boot? just so that i can compare the frame length to my own boot (mine is 43/44) rather than just think of the frame length.
Your so lucky to have that nice long freshly surfaced smooth road to skate.. i bet that was good.
nice outtake at the end. haha. least it wasnt close up.
Take care
all the best.
I haven't measured them, but it's still the same axles I used for the 4x90mm setup. The black ones, which came with the frames. My boot is size 39 (EU). Good idea to keep the boot frame ration in mind as well.
In regards to paved bike trails we're lucky here, that the federal state covers about 80 percent of the building costs, which is a huge incentive for the counties and towns to build them.
That outtake is a few seconds of the real me :D I hope it helped at least to scare the advertisers away (edit: just checked, unfortunately it didn't) It sucks that the ads pop up now just about everywhere, even on small channels.
@@WitchonWheels I didn’t see any ads on your video ( however my laptop has started cutting the ads short so they only pop up for 1 second) I don’t know why it’s started doing that. my phone still plays ads until “skip” appears
There is supposed to an initiative here to build a network of cycle paths, that is going to start soon. There are only 2 near here one goes through a park ( about 800m long) and the other is down a long hill next to a road and ends abruptly where the road intersects. Quite steep as well and only 1m wife.
Take care
All the best
@@klisher Finally a useful bug in the software :D Same here with steep downhills. They always end either at an intersection or in a curve hidden from view. Have a great weekend.
Hey, do you prefer the 110s or the 125s more? Thanks
It depends on the distance. For shorter trips I prefer the 110s, for longer ones the 125s 🙂
@@WitchonWheels if you had to choose one set up forever, which would you pick? :p
@@Hjw673 It's getting more and more difficult :D 125mm - hoping I can keep skating my current distances forever ;)
Would you say matter are the best wheels you can buy
I haven't skated all, not even most of the wheels available on the market. When I asked the staff of the skate-shop for the best wheels for my specific purpose (long distances on partly rough asphalt), they recommended these wheels and I was most pleasantly surprised :D
@@WitchonWheels Wäre ganz toll wenn du mal Powerslide Spinner Wheels in der Härte 88 A testen würdest. Ich bin gespannt auf das Ergebnis.
Your Supreme wheels are fine, you just need some other spacers. Its a normal problem not every spacer fits to every bearings and wheel kombo.
Viele Grüße 😉
Thanks for your tip :) I already suspected it to be something like that. Ebenfalls viele Grüße
Nice again! So...which set up do you like the most? 4x90 rockered or 3x110 straight?
Here comes the hard question I've avoided so far :D It very much depends on the type of skating. I mainly skate for working out after long days of mostly sitting in the office. Therefore, you'll probably see more videos with the 3x110mm flat version, which does not mean, however, that I don't enjoy the 4x90 rockered setup just as much, whenever I mount it.
Natürlich das böse "A" - Wort... gleich noch am Schluß 😂
Ansonsten excellenter Review👏😄
Vielleicht hilft es, dass keine Werbung eingeblendet wird :D Danke jedenfalls fürs Mitrollern und Filmen
I just never like the look of the g13. green is an awful color. wish they have a different colour