Thank you Dear Babu, share this with your friends, Check our other lectures and subscribe to get alerts on new uploads at th-cam.com/users/PiSquareAcademyvideos?sub_confirmation=1 If you have any doubts on this topic, join live interactive session to have a direct interaction with Sekhar sir & get your doubt clarified. Check our fb page for more details facebook.com/bbs.pisquare/
thank you sir now I have understood 3-point starter in deeply after watching this video. Your explanation is best sir and also help me with complete animination 👌💕💕
Sir Its pleasures to learn from you. Thank you so much. N i request to make more video lecture on interview questions that ll help us for gpsc interview.
Thank you Dear Neeraj, Check our other lectures and subscribe to get alerts on new uploads at th-cam.com/users/PiSquareAcademyvideos?sub_confirmation=1 If you have any doubts on this topic, join live interactive session to have a direct interaction with Sekhar sir & clarify your doubt. Check our fb page for more details facebook.com/bbs.pisquare/
Pi square academy..thanku sir..u made such a wonderful videos which really helped me a lot..sir please make some more videos on the topic which related to power system analysis,switchgear protection..please sir upload more videos as soon as possible sir..
Thank you. Check our other lectures and subscribe to get alerts on new uploads at th-cam.com/users/PiSquareAcademyvideos?sub_confirmation=1 and please share this with your friends
Thank you stay tuned to our channel for more such videos, the more you Share these free lectures "more we Upload". For every 100 clicks on share we will upload a new interesting lecture.
Excellent explaination sir.but now due to economic reasons brass bar has been removed and the upgraded version is even better.this is srikanth and we spoke on phone once.
Yes Srikanth, you are right, now a days we are even not using these manual starters. But we have to understand the operation of the manual starter for automation. Thank you for your response, we hope your ESE Interview was good.
i have a small dought sir, that is in this, after adding the rheostart to the field winding how can current will reduce through NVC , the current will reduce after reaching the rheostart , because there is a drop, but there is no drop before NVC , So how can that demagnetiseand handle will come back . i have clarity on hole vedio but have only this dought sir ,please clarify this problem sir
please note these points MR.Goud 1. current in a series path is same. 2. as resistance increases in a particular path for given voltage then current will reduce. 3. reduction in current will reduce the flux.
Thank you mohan, please share the video with your friends, which costs nothing for you but gives us great motivation in doing more such videos. And do subscribe to our channel.
Thank you stay tuned to our channel for more such videos, the more you Share these free lectures "more we Upload". For every 100 clicks on share we will upload a new interesting lecture.
I am also an IITian....But man with this animation and your explanations..you boost my knowledge of starters.
Best video on this topic
Explanation is clear
Sound quality is not good but the clearing the concept eliminates that fault
Very nicely described sir.I watch every one of your videos very nicely and watch with great interest. you like each video very much.
Thanks very much....... Sir you are doing good job for electrical engineering students to clear basic concepts. Thanks very much again sir
It's a standing ovation sir👏👏
sir superb sir. you give very simple way of explanation with clear understanding sir.
Thank you Dear Babu, share this with your friends,
Check our other lectures and subscribe to get alerts on new uploads at
th-cam.com/users/PiSquareAcademyvideos?sub_confirmation=1
If you have any doubts on this topic, join live interactive session to have a direct interaction with Sekhar sir & get your doubt clarified. Check our fb page for more details facebook.com/bbs.pisquare/
Nice explanation with visually.....
Thank you sir.....
nice explanation sir..
thank you sir now I have understood 3-point starter in deeply after watching this video. Your explanation is best sir and also help me with complete animination 👌💕💕
Sir
Its pleasures to learn from you. Thank you so much. N i request to make more video lecture on interview questions that ll help us for gpsc interview.
Superb explaination sir 😊
simply superb sir..thank you sir
Awesome sir....thank you sir....
superb and nice explaination sir... ur videos are very helpful to understand
Sir, you are truly fantastic and what an amazing explanation
Thank you Dear Neeraj,
Check our other lectures and subscribe to get alerts on new uploads at
th-cam.com/users/PiSquareAcademyvideos?sub_confirmation=1
If you have any doubts on this topic, join live interactive session to have a direct interaction with Sekhar sir & clarify your doubt. Check our fb page for more details facebook.com/bbs.pisquare/
good explanation with slides
thank u very much sir
simply nicely delivered and 100% picked
perfect and nice teaching sir..helped to clear concepts within less time..thx.
Thank you Mr.Patil, keep following our channel for more concepts
very nice explanation sirr..keep it up..❤❤
really very helpful and very amazing presentation
Pi square academy..thanku sir..u made such a wonderful videos which really helped me a lot..sir please make some more videos on the topic which related to power system analysis,switchgear protection..please sir upload more videos as soon as possible sir..
Thanx for your videos full of knowlidge
Thank you so much sir.. fullllllyyy satisfaction. 👍👍👍👍👍👍👍👍👍👍🙌
Mind fresh lecture sir
Quite enlightening !!!
Wow awesome sir...
I appreciate your efforts Sir.Great idea for explaining.
Thank you Mr. Aditya
@@ThePiSquareAcademy hi sir
How you made this animation vedios sir...if possible can you please tell me the course
sir we want more video of Electric Machine-1st. If you cover the entire course in more detail, we will all be very grateful to you.
Yes sir
nice explanation sir👌👌
I am very Grateful to Pisquare academy!
Thanks a lot Sir!
Wonderful explanations and very easy to understand!
..very good explanation..thank u
Thank you. Check our other lectures and subscribe to get alerts on new uploads at
th-cam.com/users/PiSquareAcademyvideos?sub_confirmation=1
and please share this with your friends
Super sir! nice explanation.
Very informative video sir
Excellent explanation sir
Thank you stay tuned to our channel for more such videos, the more you Share these free lectures "more we Upload". For every 100 clicks on share we will upload a new interesting lecture.
very nice explained sir
Excellent 👌👌👌👌👌
khaati sir...
very usefull ....👍👍👍👍
super lecture on three point starter
Thank you so much sir 🙏
Excellent😄
wonderful explanation...
Thank you sir.. Very interesting
Kya bnda h yar
Awesome discussion
Nice explanation.i have an doubt in case of open circuit in field winding while using 4 point starter.how it will protect the machine
good explanation sir pls upload more videos on types of winding in detail
Sure, your request is enlisted. We will do it ASAP, stay tuned to our channel. Thank you
Excellent explaination sir.but now due to economic reasons brass bar has been removed and the upgraded version is even better.this is srikanth and we spoke on phone once.
Yes Srikanth, you are right, now a days we are even not using these manual starters. But we have to understand the operation of the manual starter for automation.
Thank you for your response, we hope your ESE Interview was good.
Excellent
very nice explanation..:)
Thank your Mr. Abhinav
Sir plz make a video on Ward Leonard system of speed control of a DC motor
Sure mishra, your request is enlisted
Sir, I have a doubt
Which test is used to "seperate stray losses" in DC motors? Please help me.
Sir would you please , make a vidio for various electrical circuit theorems like norten , thevenin , superposition etc
Good job sor
Please explain about ward Leonard method of speed control
please make a video on singaly & doubly excited machines
Nice job sir ,
How to regenerate and braking a traction which supply used by traction how to use transformer
Sir is overload coil connected in series with armeture plzz give me ans
Yes, it is
Super sir
Please explain about testing of DC machines sir
i have a small dought sir, that is in this, after adding the rheostart to the field winding how can current will reduce through NVC , the current will reduce after reaching the rheostart , because there is a drop, but there is no drop before NVC , So how can that demagnetiseand handle will come back . i have clarity on hole vedio but have only this dought sir ,please clarify this problem sir
please note these points MR.Goud
1. current in a series path is same.
2. as resistance increases in a particular path for given voltage then current will reduce.
3. reduction in current will reduce the flux.
Pls make videos on dc generator pitches and different types of windings
sir please explain that why starter is necessary for starting a dc motor..
Sir, well explained but a doubt
the handle u said is an insulator then how does current flow through it?
Sir please add characteristics of DC motor and generator videos
Sir please make video on speed control of dc motor by using thyristor circuits
nice explanation sir
Thank you mohan, please share the video with your friends, which costs nothing for you but gives us great motivation in doing more such videos. And do subscribe to our channel.
Thank You sir
Sir....Plz give a detail about 3ph,380 or 430v...Ats(atomatic transfer switch) then using plc programmable relay to contol the ats
Please provide a video on capacitor. How current flows ??
Sir please explain the ferrantic effect
Would you plzz explain about dc generator and parts sir
Upload for 4 point starter also.
good 1
The starting of the motor current is very high to explain the mathematically explain .that vedio uploaded sir
Thank you stay tuned to our channel for more such videos, the more you Share these free lectures "more we Upload". For every 100 clicks on share we will upload a new interesting lecture.
sir plz make the vedio lecture on operating characterstics of dc motor
Sir plz explain florescent lamp working
how current is bypass from Nvc when overload is hsppened .
please make a video of armature reaction in alternator
Sir please make videos on i cs fundamental and how to program ics
What will happen to dc motor if run it on ac excitation ???
Sir 👌👌👌👌👌
please also upload 4 point starter
Sir mujhe gate ki preparation krni h to plzz say smthng idea
VIT students attendance >>>>>
Yo
Dai..
lights vesi projector o chestaada evaadainaa and akkada antha clear ga em kanipistundhdii broo
Starting music was nice
Sir please generator characteristics with numerical ,explain
Sir, torque per bhi ek video bna do
Hi da arambakam
How the current gets bypassed
4-point starter please uploaded sir
Please upload " 4 point starter"
sir I want more electrical subject vedios
control systems
power electronics
etc....
Upload videos on jones chopper and morgans chopper
Very good explained
Sir please dc 2 point starter
And four point starter Maketheanimation
Good explanation but no clarity on borad writting
Sir transmission or distribution se bhi some lecture upload kijiye
armature reaction and commutation process video please upload sir
Dear mohan, we have already done the lecture on these topics. Subscribe to our TH-cam channel to get updates on our videos.
Armature reaction: th-cam.com/video/3BXgi5lIxA0/w-d-xo.html
Commutation: th-cam.com/video/29WtpSiCbd0/w-d-xo.html
sir can u explain 2 point starter
Please make vedio on armature windings
Display board dikh nhi raha hai
Why frequeny is 50 or 60 and not below 50hz and not above 60hz in ac????
Bhai give lecture in hindi for our benefit and ur convenience