The connection you uploaded is wrong... To screws 1 and two of the D52-2066 we simply bring the current it needs to work. And from our general switch, we pass the phase cable through the hole of the D52-2066 and from there to the various fuses so that the D52-2066 measures inductively so that you don't heat up and get damaged by the large consumptions of the house
Hola yo compre uno pero la medicion de Watts no lo da bien, y si me molesto, el tuyo si da en la operacion de multimplicasion de la corriente por el voltaje, como se ve en video, saludos y muy buen video
Does it measure current in reverse direction? (I want to connect it to my solar panels' inverter and I need to know if I draw electricity or if I feed it back to my provider's network).
yes , you have two choices , one is Measuring Range from 40-300V & the 2nd one is from 250 - 450V...mine is from 40-300V bcos we always experience low voltage from the utility.
@@gabrielmaliq I reset it every month ...Press and hold the button until it resets 7-8 seconds If it doesn't respond, try double-clicking and holding the button down until it resets
Check link www.amazon.in/amiciSense-40-300V-Frequency-Monitoring-Colorful/dp/B098NJ5TFQ/ref=sr_1_1?crid=3HQJTQ0823RZE&keywords=d52-2066+multifunction+digital+meter&qid=1642244056&sprefix=D52-2066%2Caps%2C174&sr=8-1
@@daxxxumixcollection1717 I left audio on in case it had something to say that might make it clearer on how to wire this. Watching it a 2nd time muted didn’t help either, but gave me a vague ideal of how to wire it, but I'm not there yet. People are trying to help you when suggesting to lose the music. But appreciate you taking the time to help try to make sense how to wire it.
@@daxxxumixcollection1717 Dear a piece of advice, always focus on the comments like this instead of suggesting what they can do, these type of comments are for your own good and can surely help to grow your channel by correcting things, Ignore my advice if you are working on TH-cam for fun only.
The connection you uploaded is wrong... To screws 1 and two of the D52-2066 we simply bring the current it needs to work. And from our general switch, we pass the phase cable through the hole of the D52-2066 and from there to the various fuses so that the D52-2066 measures inductively so that you don't heat up and get damaged by the large consumptions of the house
ty for the comments.
why did you bother looping the neutral cable through the top and taping it when you could of just patched it in at the underside screw like the live?
Hola yo compre uno pero la medicion de Watts no lo da bien, y si me molesto, el tuyo si da en la operacion de multimplicasion de la corriente por el voltaje, como se ve en video, saludos y muy buen video
Can I pass through 2 4mm wire through the hole?
Does it measure current in reverse direction? (I want to connect it to my solar panels' inverter and I need to know if I draw electricity or if I feed it back to my provider's network).
How accurate is this meter when compared to traditional Class 1 energy meter ? can you help
traditional class 1 have higher accuracy than digital meter..Class 1 mostly widely use, household and commercial..
Essa modelo ele é 110volt?
Phase wire passing through the hole should be thick
Is it compatible with line-line connection?
yes..Line to line or Line to Neutral..
Which graph is for line to line connection? Graph 1 or graph 2?
👍🏻👍🏻👍🏻
...start 40 - 300 V ... ?
yes , you have two choices , one is Measuring Range from 40-300V & the 2nd one is from 250 - 450V...mine is from 40-300V bcos we always experience low voltage from the utility.
When it is switched off does it retain kwh consumed or does that get reset to zero?
no it keeps it reset if we want only from the button
@@ΠΑΝΑΓΙΩΤΗΣΓΙΑΝΝΑΚΑΚΗΣ-ε7μ how to push the button reset ? when i push the reset button (the blue button) nothing happen
@@gabrielmaliq I reset it every month ...Press and hold the button until it resets 7-8 seconds If it doesn't respond, try double-clicking and holding the button down until it resets
You're using a UK plug and UK wiring colours at 230v but your Hz is 59.9 so you can't be in the UK.
Setrika wattnya sampai 1000? Sepertinya kurang akurat deh
Bakit po di ko ma reset yung sa akin?
What is the prise in india.
Check link www.amazon.in/amiciSense-40-300V-Frequency-Monitoring-Colorful/dp/B098NJ5TFQ/ref=sr_1_1?crid=3HQJTQ0823RZE&keywords=d52-2066+multifunction+digital+meter&qid=1642244056&sprefix=D52-2066%2Caps%2C174&sr=8-1
Sorry but I had to downvote this because of that infuriating noise that I assume is supposed to be music. I couldn’t even finish watching it
thanks for watching..u can click the mute on/off my dear..
@@daxxxumixcollection1717 obviously, but why add the annoying, obnoxious noise in the first place?
@@daxxxumixcollection1717 I left audio on in case it had something to say that might make it clearer on how to wire this. Watching it a 2nd time muted didn’t help either, but gave me a vague ideal of how to wire it, but I'm not there yet. People are trying to help you when suggesting to lose the music. But appreciate you taking the time to help try to make sense how to wire it.
@@daxxxumixcollection1717 Dear a piece of advice, always focus on the comments like this instead of suggesting what they can do, these type of comments are for your own good and can surely help to grow your channel by correcting things, Ignore my advice if you are working on TH-cam for fun only.
I muted it. What on earth is the point of music on such a video?
Sir pwede ba ito gamitin as sub meter ng bahay? Bali ilalagay sya after main breaker sana mapansin mo sir.
pwede pwede sir.
എന്താ വില. കമ്പനി ഏതാ
nakakalito sa mga bagohan..🧐
डिस्प्ले लाइट बहुत कम है क्वालिटी भी इतना अच्छा नहीं है जितना ऑनलाइन पर फोटो डालकर दिखाया गया है
Ga guna klu ga di jelasin