Ok son, just like I tell my son, and my grandfather told me several times. When it comes to your drill bits, High speed steel means slow speed drill, don't get in a hurry, it goes so much faster that way. God bless you, and yours.
PastorBCoy would you make some plans for it with measurements so its possible to bring the son out and make it here in europe as a father/son project ?
Pastor I have been a welder fabricator for over 35 years and companies that I have also been trained on Laths, mills, and surface grinders. You do miticulous detail to your work I can see. I have welders, cutting rig, and all that other stuff I have collected over the years for my trade and do a lot of side work also, I can see you are a very tallented craftsman I entend to make some kind of saw mill myself. Thank you for being so inspiring, but of course thats your other job also as a pastor.
Wacking the shaft in through your bearing pillow blocks like that will make the bearings noisy right from there get go, use tubes that push on the bearing centre onto the shaft, putting the force on the inside race not the balls will keep it as new, hitting the outside race will mess it up
Hi Pastor, I really like you sawmill and the music that goes with it, I saw on some reviews Satan doesn't like it but that is understandable. I am a missionary in Botswana Africa training church leaders as well as doing some skills. We have lovely Teak wood here. I was wondering if you don't have any plans for your mill that you can sent me. Blessiengs Freddie
Thanks again for posting videos of your sawmill project. I found a hub like the one you use that fit the go-cart axle I am using for my mill. I just started some welding and I will post videos with my earlier concept and parts videos shortly. I sure hope mine works as good as yours.
You should step drill your holes. Anything from 3/8" and up should have a smaller hole drilled first and the larger the bit the more steps that should be taken to prevent burning up your bit.
Hi there, I would like to see how the hinged section is put together. And we're you bought the wheel hub and axle from. Could you also show a more detailed view of the saw mill cheers.
ay man. I know the feels with struggling with a blunt drill bit. my heart goes out to you for keeping preservering.. I would have got the shits and beaten someone up by now hahahaha great music bud. I dig it !!!
Did you have any issues getting the blade to track? The research that I've done suggests the wheels must be "towed" in order for the blade to track. On your sawmill is there some mechanism that accomplishes this?
Hi PastorBCoy, I am building a mill similar to yours. I noticed some people put an angle adjustment on one tire and others put an adjustment on both (so one of the tires ends up with an angle and a tension adjustment). It looks like you put an adjustment on one tire for angle and an adjustment for blade tension on the other. Is that correct? Or does one tire have two adjustments? Can you elaborate please? Thanks!
Don't know if you still monitor these comments but I would love to know where you got that flange (6 min. mark) for the tire and what it cost ...thank you
don't drill at full speed it wears your bit out faster I use a variable speed drill and watch the chips, you want curls coming out and I use a bowl with used motor oil and keep dipping drill into bowl. Don't let bit get hot
No one ever told you how to drill a small pilot hole first then use larger drill bits...Damage large drill bits trying to drill a hole from start to finish.
Senhores generais, o povo brasileiro e humilde e desinformado quanto ao crescimento do comunismo no Pais que os senhores tem parte de culpa. Se depender desse povo ir as ruas para que haja uma intervençao militar, nao vai rolar. Mas que a mesma aconteça em virtude do Brasil esta sendo governado por uma facçao criminosa que aparelhou todo Estado. Nao tem como negar tal fato. Os bandidos nao iram chamar a policia. Ate palestra da existencia do foro de Sao Paulo o General Mourao trouxe a tona. Portanto fazer vista grossa aos fatos, so revela Omissao e Prevericaçao das Forças Armadas.
Pastor you look pretty skilled in welding and fabricating do you have to do side work to supplement your income, but none of my business our pastor also does extra work also.
Hi PastorBCoy, Amazing work! I have to get in line with the others here - where did the axle/hub/wheel assembly come from? It's one of the toughest things to source. Thanks!
when drilling steel ...punch first ..then pilot ..then step up to finished size ... and use lower speed ... builds up less heat and preserves drill bit ..that was painful to watch !
+Jim Murphy I built this away from home and was extremely limited in my tool selection. The only drill bit I could find was borrowed from the neighbor. It was as dull as a stick and I had to suffer through it.
Keith Lucas Difficult but works. I was a expert drill sharpener by the time I was 16. Showed lots of kids when we built go carts.. This Old Tony has an excellent vid on that.
@@FFLFFS ...grandfather was a machinist in the Navy...afterwards he owned a hardware store with a machine shop in the back. I got to sort 55 gal drums of stuff swept off the floor from manufacturers of nuts, bolts, washers and other stuff he bought cheap when I was 7 years old. By the time I was 12 a 57 Chevy Bel-Air with a built 327 sat in it built by me. I built a go-kart from scrap with zero welds and completely bolted together and holes drilled everywhere needed. Believe me gramps and my dad taught me well enough to become a master toolmaker building molds and dies for Deutsch.
Ok son, just like I tell my son, and my grandfather told me several times. When it comes to your drill bits, High speed steel means slow speed drill, don't get in a hurry, it goes so much faster that way. God bless you, and yours.
Sorry guys! I've been ill for the last two weeks. I will have part 4 uploaded Sunday May 4th.
PastorBCoy would you make some plans for it with measurements so its possible to bring the son out and make it here in europe as a father/son project ?
k
jimsbix pp
PastorBCoy
Enjoy your videos and your music.
Pastor I have been a welder fabricator for over 35 years and companies that I have also been trained on Laths, mills, and surface grinders. You do miticulous detail to your work I can see. I have welders, cutting rig, and all that other stuff I have collected over the years for my trade and do a lot of side work also, I can see you are a very tallented craftsman I entend to make some kind of saw mill myself. Thank you for being so inspiring, but of course thats your other job also as a pastor.
Классным станок получился и музыка хорошая.
Wacking the shaft in through your bearing pillow blocks like that will make the bearings noisy right from there get go, use tubes that push on the bearing centre onto the shaft, putting the force on the inside race not the balls will keep it as new, hitting the outside race will mess it up
Hadir menyaksikan❤🎉
Muito bom... bem explicado...didático. Parabéns
amigo esta buena su labor. la próxima ocasión no sufra tanto con las brocas afilarlas es fácil o usas nuevas, felicidades desde Colombia.
Hi Pastor, I really like you sawmill and the music that goes with it, I saw on some reviews Satan doesn't like it but that is understandable.
I am a missionary in Botswana Africa training church leaders as well as doing some skills. We have lovely Teak wood here. I was wondering if you don't have any plans for your mill that you can sent me.
Blessiengs
Freddie
Music satisfying!👍
Thanks again for posting videos of your sawmill project. I found a hub like the one you use that fit the go-cart axle I am using for my mill. I just started some welding and I will post videos with my earlier concept and parts videos shortly. I sure hope mine works as good as yours.
good job but you made drilling a hole look hard just a suggestion use cutting fluid a good drill bit
Parabéns muito bom mesmo 👏👏👏👏👏👏👏👏
You should step drill your holes. Anything from 3/8" and up should have a smaller hole drilled first and the larger the bit the more steps that should be taken to prevent burning up your bit.
hi if you first drill a small hole then the bigger drill will go thru much faster
Will Hatting Yeah, I was away from home, because my house is of solar. Had to barrow that bit. It defiantly could of used a sharpening.
That was my first thought also...first small bit then a bigger... good working!
/Swede
+PastorBCoy less speed more presure + lubrication (from a steel fabricator)
soarin
soaringtractor iı
How is the axle connected to the hub?
Благодарю вас за видео лайк
Hi there, I would like to see how the hinged section is put together.
And we're you bought the wheel hub and axle from. Could you also show a more detailed view of the saw mill cheers.
Egidio Borg I will post an overview of the sawmill sometime in the next couple weeks. So keep checking in from time to time.
I've got a bunch of wood I need to saw with a bandsaw. Something like this I can make with some of the things in my workshop and my everlast welder.
MUTE IS your friend when the music is crappy. good build.
ay man. I know the feels with struggling with a blunt drill bit. my heart goes out to you for keeping preservering.. I would have got the shits and beaten someone up by now hahahaha great music bud. I dig it !!!
persevering I think that's how you spell it !!!
just saw your video...great jobdo you have a parts list that you can share? it would be greatly appreciated
go to TXDashcovers.com for a basic parts build kit on my sawmill...
Отлично 👍👍👍🇷🇺
Did you have any issues getting the blade to track? The research that I've done suggests the wheels must be "towed" in order for the blade to track. On your sawmill is there some mechanism that accomplishes this?
No, I haven't had a problem with the blade. One of the wheels is on a hinge. A bolt runs through it to control the position of the hinged wheel.
The hinged wheel controls the tracking.
PastorBCoy
Do you think that maybe you could show a video on how the hinged wheel works, I really like your video's, great Job.
Interesante maquina...saludos desde Venezuela
Hi PastorBCoy, I am building a mill similar to yours. I noticed some people put an angle adjustment on one tire and others put an adjustment on both (so one of the tires ends up with an angle and a tension adjustment). It looks like you put an adjustment on one tire for angle and an adjustment for blade tension on the other. Is that correct? Or does one tire have two adjustments? Can you elaborate please? Thanks!
just found my answer in your things to know before video. Thank you!
Can i ask were everyone is getting the bit that bolts to the wheel from or thy custom made
Go cart hub from ebay or amazon
@@PastorBCoy and what side is it please and your wheels
Simple and peacefull thanks
Can anyone help me which music is being played here..... I really enjoyed hearing the music...
what is your email address? I'll send you a copy.
hello, nice job, your shaft is what size 1 inch or more that goes into your pillow bearing
Its best one iv seen
excelente video .por fabor me podrias dar plano y medidas para fabricar uno gracias soy de URUGUAY
Did you know this song is Proverbs and its very cool.
Cool build great work but terrible music ..thought I could just turn it down ....nope mute!!
Hi, what size is the outer tube compared to the tube it slides up and down on, cheers.
Nice series, but where did you get the tire hubs?
Don't know if you still monitor these comments but I would love to know where you got that flange (6 min. mark) for the tire and what it cost ...thank you
amigo como faço aquela ferramenta mao de força para girar os troncos , rodar levanta etc de lado ?
bonsoir et bravo pour votre scierie je vais peut-etre prendre modele pour la mienne,j'habite en FRANCE dans les Landes sud ouest .
jeannot lapin Je voudrais suggérer quelques motifications . Je prévois de faire un examen vidéo bientôt. Garder un œil sur elle .
don't drill at full speed it wears your bit out faster I use a variable speed drill and watch the chips, you want curls coming out and I use a bowl with used motor oil and keep dipping drill into bowl. Don't let bit get hot
+kiddiescripterkiller
The bigger the bit; the slower it should turn and more pressure applied. Always pilot hole with a small bit.
What did you use for wheels and hubs?
What is the name the cell mechanism where those bearing.
No one ever told you how to drill a small pilot hole first then use larger drill bits...Damage large drill bits trying to drill a hole from start to finish.
hi, where did you get the big pulley wheel?
And I thought I was the only one who had such an old and heavy grinder.
Parabéns Pastor...
il faudrait affûter tes mèches le perçage se ferait mieux 👀👀👀👀👀👍👍👍👍
Pmech
Ronald McCain I like to talk to you bout the bed you took off your golf cart, if your gonna just dith it?
Like. From Russia with love. What the song this video?
احسنتم صنعا
Senhores generais, o povo brasileiro e humilde e desinformado quanto ao crescimento do comunismo no Pais que os senhores tem parte de culpa. Se depender desse povo ir as ruas para que haja uma intervençao militar, nao vai rolar. Mas que a mesma aconteça em virtude do Brasil esta sendo governado por uma facçao criminosa que aparelhou todo Estado. Nao tem como negar tal fato. Os bandidos nao iram chamar a policia. Ate palestra da existencia do foro de Sao Paulo o General Mourao trouxe a tona. Portanto fazer vista grossa aos fatos, so revela Omissao e Prevericaçao das Forças Armadas.
Pastor you look pretty skilled in welding and fabricating do you have to do side work to supplement your income, but none of my business our pastor also does extra work also.
jedediahbc My ministry is on faith, sometimes I have to do a little work on the side but not always.
Achei muito bom, pena q não se traduziu pro português...obrigado
McCain where are you from? I'd like to talk with you,bout the bed you took off the cart?
De vez en cuando sería bueno afilar las brocas.
are you pre- trib,mid-trib, post-trib
If you want to make eco just use inplix handbooks
A happy New year. I would like to buy a sawmill.
Need a sharper drill bit before you damage the drive.
Could do without the song and background music.... shrug. Machine looks good. Watching you drill holes is painful.
Hi PastorBCoy,
Amazing work!
I have to get in line with the others here - where did the axle/hub/wheel assembly come from? It's one of the toughest things to source.
Thanks!
Alex Khan A mix of ebay, harbor freight, etc. th-cam.com/video/dbRY528uTRY/w-d-xo.html
but ...good job in the end !
You really need sharp drill bits.
Otherwise, looks like a nice build.
when drilling steel ...punch first ..then pilot ..then step up to finished size ... and use lower speed ... builds up less heat and preserves drill bit ..that was painful to watch !
bit sharpener is your friend!
A fúrót illene megélezni. A fúrásod szégyent hoz a szakmára,de az ék behelyezése is "csúnya" volt.
31/07/2016
Good evening
My friend besides like the video, who is the singer who sings this music video.
thanks
vc tem o projeto,as medida desse perfuratris
O kr e um gênio muito bom
Bom dia, alguém sabe me dizer o nome destas peças verdes com rolamento?
Usa una broca mas pequeña como guía desespera verte sufrír para hacer una simple perforación..
You have to buy new drills ;-)
Goood...!
hey there cowboy bits you sharpen
Manuel Navarro That bit was a borrowed one. Had a terrible time with it.
Try sharpening your drill bits
เจ๋งหว่ะ!!
научитесь точить сверла или купите острые
DEUS ABENÇOE, sua inspiração...
Jeleh liat ngebornya.
Wath`s the name of the song?
Buena
Olá amigo vc poderia mandar pra mim o projeto dessa máquina, porque pretendo fazer uma
Obrigado
City pantry house thanks
The drill bit is dull - it does not cut. Change it another- sharp every norec-fool.
Sharpen that bit.
gostaria de saber se corta eucalipto também e se poderia traduzir pra portugues
DonnDIY did a same sawmill(kinda):)
AMEI,MUITO!!!!!!!
I thought craftsmen in Russia.
Your drilling prowess is terrible lol! Read up on speeds ,pilot holes and lubricants!
+Jim Murphy I built this away from home and was extremely limited in my tool selection. The only drill bit I could find was borrowed from the neighbor. It was as dull as a stick and I had to suffer through it.
+PastorBCoy sharpen them!
@@FFLFFS ....with the angle grinder no less......stuck in a vise or clamped to the frame of whatever you're building.
Keith Lucas
Difficult but works. I was a expert drill sharpener by the time I was 16. Showed lots of kids when we built go carts.. This Old Tony has an excellent vid on that.
@@FFLFFS ...grandfather was a machinist in the Navy...afterwards he owned a hardware store with a machine shop in the back. I got to sort 55 gal drums of stuff swept off the floor from manufacturers of nuts, bolts, washers and other stuff he bought cheap when I was 7 years old.
By the time I was 12 a 57 Chevy Bel-Air with a built 327 sat in it built by me.
I built a go-kart from scrap with zero welds and completely bolted together and holes drilled everywhere needed.
Believe me gramps and my dad taught me well enough to become a master toolmaker building molds and dies for Deutsch.
motores de 22
motores de. 250 segunda mano
Afile las mechas!
ela
am in Ghana
1QQ
graag mozaiek beelden
please , buy new drill bit - this is cheap.
esa broca esta ameyada jaja
Super Bohrer 😂
afila esa mecha
OK............................
What is this brother.......video not complete