"Quick tips" Hacking HERZO Surface Grinding Dust Shroud with the Milwaukee tool system
ฝัง
- เผยแพร่เมื่อ 8 ต.ค. 2024
- This video is about unboxing & assembly HERZO Universal Surface Grinding Dust Shroud for Angle Grinder 5-inch onto a Milwaukee tool system.
Please use links below to get your products. “As an Amazon Associate I earn from qualifying purchases.”
Product link : amzn.to/31jLLuv -homedepot.sjv....
M18 18-Volt 2 Gal. Lithium-Ion Cordless Wet/Dry Vacuum : homedepot.sjv....
Thanking you for supporting my TH-cam channel by liking, subscribing and clicking the bell icon for notification of future videos. It really does make a big difference and also please share my video links.
Special Offer
Tesla Referral Program : ts.la/ray11990
You and anyone using my referral link can now earn 1,000 miles of free Supercharging with the purchase of a new Tesla car. Earn a $100 award after system activation by purchasing or subscribing to solar panels.
Watched lots of videos and this is the best. Finally understood what the red push-aside shroud is used for. And also the lower-the-brush tip is a lifesaver. 😃😃😃
I was trying to figure out if I wanted to buy the Herzo 7 inch shroud for a Milwaukee 7/9" grinder and after watching your video I will am going to purchase it. Thank you for your review and your helpful demonstration. Oh, and I have had my eye on that 2 gal cordless vacuum for some time, it does look like its sweet! Maybe that will be my next tool purchase...I'm gonna need a bigger garage.
Thanks for the feedback and please remember to subscribe to the channel and like the video.
Awesome video Ray love you Music too man I purchased the same shroud but my grinding wheel was a little bit shorter than normal so you have to push real hard to get a touched the concrete just wanting if you had that issue I was using a 4 inch grinding wheel maybe if I go up 25 inch grinding wheel maybe that will change The depth of the grinding wheel to make it more level with the bristles just want to have the same issue and if you have any advice thanks again for the video keep them coming
Cavzzila no I haven’t had that problem. It worked like A charm for me. Thanks for the feedback and please remember to subscribe to channel and like the video.
Thanks a heap, Ray. These are some great tips. I'm using some different brands than you and an old corded grinder. Your tips are just as applicable though. Good job on the photography, too.
Thanks for the feedback and please remember to subscribe to the channel and like the video.
Good video keep it up had the same issue hose kept popping out .
Thanks for the feedback and please remember to subscribe and like the video.
Bro I wish I could give this 2 thumbs up, this is the set up that I need, i have the vac and grinder
Thanks for the feedback and please remember to subscribe to the channel and like the video.
I like your thinking on paying the least for the most bang.
Thanks for the feedback and please please remember to subscribe to the channel and like the video.
Very helpful! The product is pretty good except the dumb adapter.
Zhao Tao thanks for the feedback and please remember to subscribe to the channel
Yeah thats what im talkin bout.....can use that on the hull of the sail boat...;-)
😉 yes sir, very versatile tool. To make the job easy you always need the right tools.
How do I instale the adapters and when do I need them? Thank you!
Installing is Straight forward. When you need it is up to you. If you getting to much dust may be use the adapter. Good luck 🍀
Is the milwaukee a vacuum cleaner.
There’s a Milwaukee vac hooked up to this system. Please remember to subscribe and like the video.
For safety remove the battery first when you doing that.
Leo Villanueva Good tip. Thanks for the feedback and please remember to subscribe to channel and like
What’s the name of that shroud
product links are listed below. Thanks for the feedback
On all the shrouds I have bought I run into the wheel being too recessed into the shroud to reach the surface. So the shroud sticks down too far in other words. On my 7" I was able to put enough spacers on the spindle/break the springs on the shroud to get it to work but on the 5" one I couldn't get it to work so I took it back and bought a whole separate Dewalt grinder that came with a shroud - it was ridiculous.
The 7" grinder worked with the regular cupped wheels but recently I ordered a wheel that is flat (which I didn't even know existed before it came) and it won't work in my shroud
Has anyone else run into this? They were Dustless brand shrouds.
This set up worked for me. Thanks for the feedback and please remember to subscribe to the channel and like the video.
Yes. If you get another washer (like the one that secures the disk onto the grinder,)put it on top of the disk , using it to mount the disk further down the threaded shaft. If that washer is too big, improvise and. Find one that isn't .
I love it, Ray! Hey, are you a carpenter?
Thanks for the feedback and please remember to subscribe to the channel.
need a longer hose lol
Thanks for the feedback and please remember to subscribe to the channel and like the video
Bud…disconnect the battery!!!!
Thanks for the feedback
Why too fast?
Why?
Also, would you message me? So we can chat about your channel and content? Thanks
send me your em.
Just a tip in a bind. Put one pin in the hole the other outside the blade retaining nut it will work
Dana Kahler thanks for the feedback and please remember to subscribe to the channel