Manroland 706 LTTLV available immediately

Technical Data:
Sheet size: 740x1040 mm
Image area: 715 x 1020 mm
Printing plate size:785x1040 mm
Stock thickness range: 0,04-1.0 mm
Max press speed 16,000 sheets/h
Start of print: 43 mm
Max speed straight 13,000 S/h
Impress.counter: 162 millions
Feeder
Automatic sheet size adjustments
Lateral pile edge scanning
Infeed
Automatic adjustment of the lay covers and sidelays
Sheet arrival control
Suction feedboard with sheet slow-down and pneumatic sidelays
Printing units
Automatic stock thickness adjustment
Sheet guide track with controlled fans
Impression cylinder blast device
Diagonal register remote control via Transferter
PPL
Inking units
Automatic inking-up program
Plate inking rollers with steplessòy adjustable oscillation on the run
RCI remote controlled inking system
Oscillation start angle adjustable from the PECOM Press Center
Inking unit separation
Speed-compensated inking units
Alcon S.r.l.
Head of Administration: Via Alessandria 208 , 00198, Rome Italy
Tel. [phone] - email:: [e-mail] - P.IVA: 09652001000 - www.alconsrl.com
Dampening units
Delta effect selectable
Dampening solution circulation and colling with alcohol stabilizer
Speed compensated damping units
Ceramic coated water fountain rolles
AirGlide Delivery
Automatic adjustment of the sheet stop and lateral joggers to conform to the sheet size
Grafix Hiltrinic powder sprayer
Sheet brake with 7 suction wheels
Sheet decurler
Inspection sheet removal device with preselect function
Openings in the sideframe to check sheet travel
Important operating controls at the front of the delivery
Pecom press center control
Operating data and machine data acquisition
Modular central control console with color matching light
Remote control of circumferential, lateral and diagonal register
Interface for linking to a press network
Storage of important diagnostic messages
Technical job preparation
Additional equipment with:
LTTLV machine
Double coating module with two transfer modules and extension in delivery
Coating module 1:
Screen roller, carrying capacity 18cm3/m2, 80 lines, 1020 mm coating width (standard format)
Coating module 2:
TIF screen roller, carrying capacity 25cm3/m2, 1020 mm coating width (standard format)
E-line chambered doctor balde, coating darin tub and special hoses
2x lifting devices
Quick action palte clamps
Blanket washing device SelectCleaning System brush.tyoe in the printing module to wash residual inks (blanket whashing
device without coating mode), In coating mode the blanket washing device in coating module is blocked.
2 x printing pressure fine adjustment between coating form cylinder and impression cylinder
Optional equipmente with:
InlineFoiler Prindor, cold foil transfer up to 5 rolls parallel
Loading device for InlineFoiler Prindor
Quick change Job, automatic job changeover sequence
Quick change Color, Triple-Flow universal inking unit, new technology for start-stop sequences via ink flow changes, new
technology for pre-setting the inking zones
Quick Change Wash, improved ink roller washing device
Dust suction device with brush
Antistatic eliminator system,make kestern for feeder and delivery
Impression cylinder wash-up device, brush type
Cardboard device
APL, fully automatic plate loading system
Powdering device Grafix Cantronic
Powder extraction device make Schneider with SCIP cleaning system
Inking unit temperature control make Technotherm TTF 12
Dampening water cooling device, make Technotrans “beta.d”
No.2 Ceramic coated Anilox roll 13 gr./qm
No.2 Ceramic coated Anilox roll 21 gr./qm
Brush for card board cleaning device on feeder
Plinth 550 mm
Coating conditioning unit on the second coating module for cooling and heating of UV coatings, incl. A 35 liter container
with mixer and level depending doser
Quick Change Clamp. Multi-purpose clamp bars for the coating form cylinders in both coating units
Quick Change Clamp for frequent change of coating type in the second coating module
2xIR/TL coating interdeck dryers SelectDryer between the two coating modules (LTTLV)
IR/TL/UV end of press dryers Roland Seccomatic for inks and dispersion coating as well as UV coating
Nonstop equipment manual in the feeder
Nonstop equipment semi-automatic in the delivery
ColorPilot D + F. Densitometry plus Colorimetry ink measurement and regulation device integrated in the matching desk
TelePresence - Service Portal
Pintnet PrePresslink smart CIP3 connection
Used existing plinth elements included
Noiseproof cabinet for vacuum pumps included

[@manhtran2989]

I want to buy this machine? Is the machine still there?