I purchased the Gustard Audalytics AH90 and have KLH Model 5 speakers. I am very happy. the AH90 is a great kit and for the money: Headphone amp, Streamer and DAC a steal at 1/3 rd the price of the A26 or R 26.
@@jvfaura yes it does. I can use it with or without Roon. Make sure you signal is strong if using Wifi to an access point. Are you using the LAN or USB input of the AH90?
@clarice1001nights Using the LAN. I can see the Gustard in my Tidal, using Android Tidal app. When i connect though and play it returdlns network error.
@@jvfaura Mine works flawlessly. When using Tidal or Roon one has to indicate the output endpoint. If you are having "network" problems, I would assume you could have a either set-up problems or the following: signal strength or proper identification of the endpoint (driver, if applicable.)
@HiFi_Paradise thanks for the tutorial, works very well on R26. I've just received an A26, and should DSD native, the SDM settings in HQPlayer are not working, the music is having drops every 5 sec. My CPU is at 50% (i9-9900kf). Could you recommend PCM & SDM settings for A6 please ?
@@HiFi_Paradise thanks but strangely your settings are working fine with the R26 but with A26 it’s working only if original sampling is below 96kHz and 24 bit, above or equal to this sampling A26 is not catching up. R26 with HQplayer or UAPP is far better than A26 through LAN….
I do everything exactly according to the instructions and it still doesn't work for me. If I'm already at the point where I select in Balena etcher Select target, it only shows me my hard drives in the computer and nothing related to my Gustard A26. I don't understand why? Can someone help me?
Thanks for the Vid. Maybe you can help me out? I also use for streaming the Eversolo A6. Connected to the R26 via USB. But Sometimes i want to use the Coax Connection. I bought an expensive cable for this. Even if the resolution is lower, I find the sound has more depth and sounds warmer. Unfortunately, the relay of the R26 clicks every time the sample rate changes. This is annoying and is certainly not healthy for technology in the long run. What can I do here? Everything is fine via USB...
Thanks! Upgrade went perfectly!! Have the same combination: Eversolo + r26. Connected with usb. What are the best settings in the Eversolo app with latency and MQA? (Only use Tidal) Is there also a possibility to turn off the flashlight when the Gustard is in standby mode? Many thanks in advance!
Thank you very much for the instruction video. I followed the instruction and somehow the unit does not show up on Etcher flash software when it was connected to my Windows computer via USB C connection. Can anyone help me how to recognise the unit on Windows computer?
I followed your instructions and after flashing with Balena the update failed. Looking at the Gustard hard drive with my computer, it shows an empty drive. Would you please post in reply the exact link for V1.43 and how I can reset the Gustard R26. Thanks.
@@HiFi_Paradise I've bought A26, but got a problem. When I'm playing files 16bit 44.1khz via Roon - I can hear noise, the best way to hear it - put amp volume to 0 and I hear this noise, but in the same time when I'm playing file 96khz or 192khz - there is no any noise. And when Ipaused playback - there is no noise... Maybe someone already met with this problem? Any suggestions? PS I think R26 and A26 share the same platform for working with Roon...
Hi! Great combo! Do you know by any chance what would sound better. R26 or the new Eversolo dmp-a8? I’m trying to decide if I should get the A8. All I’m interested in is the best sound quality for streaming tidal/qobuz. Thank you!
@@HiFi_Paradise Thank you so much! As far a I understood, I can use with the r26 tidal connect from my iphone just like I do with my node. Or is it better to have a separate streamer? If not, it sounds like r26 will be the best choice in terms of sound quality. Thank you!
Yes, A8 is made of dual Delta-sigma AKM chips, should be close to the A26 (same chips) in term of details. However, for the soundstage & "organic" rendu I think the R26 is still better. A8 & A26 are faster for modern music, and if you like to feel the voices ahead of the rest, but for a pure guitar recording, slow jazz songs, R26 is better IMHO. Again it also depends on the connectivity, strangely the A26 & R26 sounds better using the LAN interface (through Roon) and even better in NOS mode (where NOS is enabled i.e. internal A/R26 OS is not oversampling anything) with Roon/HQPlayer vs A8 or A6/ME connected by USB to the R26 or A26 (in this case the A8 is used a simple streamer, which is a waste of money IMHO).
Hi why HQ player? Im using roon, and never try HQPLAYER whats hq can give me a speciality? With HQ always pc my run. Im have a Nuc + Roon, but hq must by installed on others Window's pc?
Question: when you only use Tidal and Spotify Connect to stream to the R26, will the soundquality with a Eversolo as "streamer only" increase or is it a waste of money?
Hello, mine doesn't even show the 32gb storage of My gustard, it just says the storage name and that i must format the disk before formating anything on it, please could you help me?
I purchased the Gustard Audalytics AH90 and have KLH Model 5 speakers. I am very happy. the AH90 is a great kit and for the money: Headphone amp, Streamer and DAC a steal at 1/3 rd the price of the A26 or R 26.
Congratulations
Hi. Is your Tidal connect working? Mine does not. It says network error in Tidal connect when connecting/playing music. :-(
@@jvfaura yes it does. I can use it with or without Roon. Make sure you signal is strong if using Wifi to an access point. Are you using the LAN or USB input of the AH90?
@clarice1001nights Using the LAN. I can see the Gustard in my Tidal, using Android Tidal app. When i connect though and play it returdlns network error.
@@jvfaura Mine works flawlessly. When using Tidal or Roon one has to indicate the output endpoint. If you are having "network" problems, I would assume you could have a either set-up problems or the following:
signal strength
or
proper identification of the endpoint (driver, if applicable.)
I can't understand what you are saying. What is the name of the app you download onto your iPad?
Nice and informative video. I have the same set up.Tidal connect update released???
Thanks
Yes, try it out.
@@HiFi_Paradise Thanks for your response. Can you give Tidal connect software update link?
@HiFi_Paradise thanks for the tutorial, works very well on R26. I've just received an A26, and should DSD native, the SDM settings in HQPlayer are not working, the music is having drops every 5 sec. My CPU is at 50% (i9-9900kf). Could you recommend PCM & SDM settings for A6 please ?
maybe the trick is to unckeck adapative rate, no more drops, hope this help others ...
Yes, you need to play with the settings and filters to get the best combo
@@HiFi_Paradise thanks but strangely your settings are working fine with the R26 but with A26 it’s working only if original sampling is below 96kHz and 24 bit, above or equal to this sampling A26 is not catching up. R26 with HQplayer or UAPP is far better than A26 through LAN….
@@HiFi_Paradise What is your hardware configuration to run HQP ? I have I9-9900kf with 32gb of RAM and RTX3090 as GPU
I run a i7 12th gen, 32gb ram with RTX3060
Did you try offloading everything to GPU?
I do everything exactly according to the instructions and it still doesn't work for me. If I'm already at the point where I select in Balena etcher Select target, it only shows me my hard drives in the computer and nothing related to my Gustard A26. I don't understand why? Can someone help me?
Thanks for the file, great, one doubt do you think on ever solo is best than internally streamer
featurewise yes, sound quality wise no.
@@HiFi_Paradise Totally agree 110%.
Thanks for the Vid. Maybe you can help me out? I also use for streaming the Eversolo A6. Connected to the R26 via USB. But Sometimes i want to use the Coax Connection. I bought an expensive cable for this. Even if the resolution is lower, I find the sound has more depth and sounds warmer. Unfortunately, the relay of the R26 clicks every time the sample rate changes. This is annoying and is certainly not healthy for technology in the long run. What can I do here? Everything is fine via USB...
why is it unhealthy?
Relay shouldn’t click with sample rate changes but with DSD to PCM and vis versa
Thanks! Upgrade went perfectly!! Have the same combination: Eversolo + r26. Connected with usb. What are the best settings in the Eversolo app with latency and MQA? (Only use Tidal)
Is there also a possibility to turn off the flashlight when the Gustard is in standby mode?
Many thanks in advance!
thank you,
i use the default settings on Eversolo so its very good.
You can turn off the blinking light from R26 settings, check it out.
Feel stupid… but where can I change the blinking light?
Hold R26 menu button and scroll down
Don’t see the option to switch off the light on the power button when in standby mode…
Thank you very much for the instruction video. I followed the instruction and somehow the unit does not show up on Etcher flash software when it was connected to my Windows computer via USB C connection. Can anyone help me how to recognise the unit on Windows computer?
I have exactly the same problem.
Hi,
Is there a way to upsample Apple Music OR Tidal with HQPlayer and then feed the R26? Or will some other device be needed
HQ player does all the Upsampling itself. It needs only a clear signal and then you have showtime.
No Apple Music,
Bedankt
It is annoying why the gustard website does not show this firmware. How did you find it?
It was sent to a forum member
What are you looking for? I am here later than this post. Is the issue resolved?
Hallo, Does Gustard R26 support ROON RAAT? My Gustard R26 only supports ShairportSynk AirPlay-streaming. PCM 44.1Hz only. Connection via LAN
Its not Roon Ready yet
I installed the Gustardrender 1v43 update, RAAT, PCM and DSD are now supported, after a day MQA also works. Kind regards@@HiFi_Paradise
Wish I could update my R26 with my Mac as I am not a pc guy. Just seems silly Gustard does not have that option!
yeah
I followed your instructions and after flashing with Balena the update failed. Looking at the Gustard hard drive with my computer, it shows an empty drive. Would you please post in reply the exact link for V1.43 and how I can reset the Gustard R26. Thanks.
try again
Does the DSD work with 1.43?
yes, but not with bubbleUpNP
Does HQPlayer make a significant audible difference to sound?
Yes but it costs you money. So you get what you pay for.
yes, but you also need a good pc and a NOS dac
@HiFi Paradise, thx for the video. Does A26 run smooth and stable with Roon?
Yes, definitely
do give it a try
@@HiFi_Paradise I've bought A26, but got a problem. When I'm playing files 16bit 44.1khz via Roon - I can hear noise, the best way to hear it - put amp volume to 0 and I hear this noise, but in the same time when I'm playing file 96khz or 192khz - there is no any noise. And when Ipaused playback - there is no noise... Maybe someone already met with this problem? Any suggestions? PS I think R26 and A26 share the same platform for working with Roon...
Hi! Great combo! Do you know by any chance what would sound better. R26 or the new Eversolo dmp-a8? I’m trying to decide if I should get the A8. All I’m interested in is the best sound quality for streaming tidal/qobuz. Thank you!
Depending on your taste, A8 has more features and does a lot more.
But I like the way r26 sounds
@@HiFi_Paradise Thank you so much! As far a I understood, I can use with the r26 tidal connect from my iphone just like I do with my node. Or is it better to have a separate streamer? If not, it sounds like r26 will be the best choice in terms of sound quality. Thank you!
Yes, A8 is made of dual Delta-sigma AKM chips, should be close to the A26 (same chips) in term of details. However, for the soundstage & "organic" rendu I think the R26 is still better. A8 & A26 are faster for modern music, and if you like to feel the voices ahead of the rest, but for a pure guitar recording, slow jazz songs, R26 is better IMHO. Again it also depends on the connectivity, strangely the A26 & R26 sounds better using the LAN interface (through Roon) and even better in NOS mode (where NOS is enabled i.e. internal A/R26 OS is not oversampling anything) with Roon/HQPlayer vs A8 or A6/ME connected by USB to the R26 or A26 (in this case the A8 is used a simple streamer, which is a waste of money IMHO).
The flash for my A26 from 1.4 to 1.43 failed. Can this be resolved? Now BubbleBNP can't find my A26 anymore :( Luckily still works fine as DAC
Did you use the right firmware for A26
Reflash the device
Will Roon App allow you to control the volume for the R26 outputs? Thanks.
yes
@@HiFi_Paradise thank you. So full control over Roon App just as if I’m using a full Roon endpoint? And no issues with connectivity or similar? Thanks
will have some limited features if you don’t use it with HQplayer, as this is not Roon Ready.
@@HiFi_Paradise ok thanks. That pretty much settles it for me and I’ll look somewhere else.
Hi why HQ player? Im using roon, and never try HQPLAYER whats hq can give me a speciality? With HQ always pc my run. Im have a Nuc + Roon, but hq must by installed on others Window's pc?
Yes, HQplayer can run on Windows PC, needs gaming PC like hardware. You can upsample to DSD or PCM and it sounds better than roon only.
Question: when you only use Tidal and Spotify Connect to stream to the R26, will the soundquality with a Eversolo as "streamer only" increase or is it a waste of money?
depends how “clean” is the lan cable to R26.
Last I checked it was noiser and Eversolo Sounded cleaner.
Hello, mine doesn't even show the 32gb storage of My gustard, it just says the storage name and that i must format the disk before formating anything on it, please could you help me?
Do not format anything!
Go through my video, looks like you have not seen my video properly
@@HiFi_Paradise Hi, Indeed i haven't downloaded etcher, that's why i couldn't flash the firmware on the Gustard. Thank you for your quick reply!
Did you downloaded the last update from gustard website? Becouse over there the last version is 1.42
No,
Go to the link in description
Please send me the link to the website to download the firmware updates. Thanks
Does it do gapless playback? Since that is what my chromecast is lacking.
Yes!
If your source is lossless various Gustard units can play lossless
Your link is for colormag-pro not the gustard firmware
thank you will change it
Does this work with a MAC? I read somewhere, you can't update with MAC.
sadly not I think
Hellou
Do you have new Firmware for A 26 ?
Head to headphonesforums, you will get it there
@@HiFi_Paradise Thank You 👍
which speakers?
Wharfedale Linton
I am interested in the topic but could not understand half of what you were saying, sorry. Polish your English!