Great question Samuel! Clear leads or drain wires are usually common ground that will go to ground, but make sure your clear wire is actually ground based on the load cell you have. For more detailed answers please email: pressure@omega.com
I think I found it and you need to set it in RdG >> dEC.P to move the decimal point. My guess is that you set it to FFFF and ultimately it will let you write 9999 as a 10K load cell.
ah your displays are dim also.. good to know its bad design and not my unit. A bit of a shame, such big digits but can't really see them across the room
The complete video that illustrates all our Guidelines for the correct installation of Load Cells, Weight Indicators and Weight Transmitters within a Weighing System. th-cam.com/video/cQtKeXBC25Y/w-d-xo.html
Excelente explanation and so professional
I was able to program my meter real fast and accurate thank you
Glad we could help you! Please let us know if there are any other product/how-to videos from Omega that you'd like to see.
Thank you, this helped me set up a similar load cell.
hello, i have DP25B-S controller but i cant find setpoint options, can you help me please
I have a 5th lead that is clear.....where would this one go? And are the other leads still in the channels discussed?
Great question Samuel! Clear leads or drain wires are usually common ground that will go to ground, but make sure your clear wire is actually ground based on the load cell you have. For more detailed answers please email: pressure@omega.com
I wish the wiring manual for the platinum series was as in depth as the DP41-S series manual.
I wonder what should be the Rd.2 input for 10K load cell. There are only 3 digits before the point and 1 digit after the point. Thanks in advance !
My experience too, did you end up finding out?
I think I found it and you need to set it in RdG >> dEC.P to move the decimal point. My guess is that you set it to FFFF and ultimately it will let you write 9999 as a 10K load cell.
How would you go about to add rfid capabilities to the system?
How can i increase the measuring speed
Because the Omega Platinum cannot catch the Peak Load Value
my process loads and unloads in 0,5 sec !!
How to connect load cell controller with RS232 and take the data on system (Computer).
I could use a video on connecting a power supply.
It's that easy!
ah your displays are dim also.. good to know its bad design and not my unit. A bit of a shame, such big digits but can't really see them across the room
The complete video that illustrates all our Guidelines for the correct installation of Load Cells, Weight Indicators and Weight Transmitters within a Weighing System.
th-cam.com/video/cQtKeXBC25Y/w-d-xo.html
For the old man its still complicated 😇😇
😊