Wow simply amazing....yesterday I visited hydroponics farming near to my place and instantly I fell in love with this hydroponics. ..And I have started searching for diy setup, and I got it in this video.. Thanks a lot for sharing ...
Dear please make video on nutrition supplements, it's essential, set up to koi bhi bana lega nutrition kaise dena hai, from 1st stage to harvesting tak iska video banao
Thanks for the video, I have some questions: 1. How do you balance nutrient A and B and measure concentration? 2. Do you have issues with mosquitoes in the water tank? 3. Is this an NFT method or a type of DWC? i ask because the water pressure seems high for NFT.
would have been nice for you to indicate what he brown balls in the grow cups with plants are.. and their use. Also, is it plain water or does the water have nutrients added? thanks for the video on the stand and pipes!
The brown balls is a clay pebbles , you can use lava rock or Hydroponic sponge , it's a grow media to support the plants and provide Darkness to the roots , yes you need to add Hydroponic liquid fertilizer to the water . Hydroponic is simple just provide the required nutrition and oxygen in the water .
The hard work you are doing in hydrophonics is appreciable . At the same time if you think over expenses u e will be suufiicient to do three to five times more agriculture in openland. The neutrients and natural elements will be abundant in the crop grown on land than any hydrophonics and midde thotas. The will stick to legs and hands but the satisfaction and economics will be more. So it left to thinkers and a suggetion only.not discouraging..
Hii, im new to this hydroponic and interested to try. you really made it looks doable :) may I ask what did u use for the decoration (like cotton / rocks) at the end of the video? thanks!
Hi there ! Besides the system you need to get net cups , rockwool ( to germinate the seeds ) ,clay pebbles to make the seedlings stand inside that cup and cover the roots from the light . Check this video you may like the system design , any question please comment I will answer . thnx th-cam.com/video/VK-dpoH5byo/w-d-xo.html
Ooof, this stuff is way harder than it looks. Careful so the clay pebbels don't get in the water, cause then the pH goes high n everything turns yellow (using perlite instead is recomendable). Also it is worth mentioning that the pipes get insanely heavy when filled with water, and the water needs to be a certain hight for tiny new things to reach it with their roots. There also need to be a certain angle on the pipes, so the water doesn't build up too much and the shelves (or whatever you use) crash down and break, and I'm not certain about this angle yet, but using PVC to hold up the pipes looks really risky and unstable (especially on only 4 legs like that). Also if you are doing this in an area were you don't wanna spill water, it is worth concidering that the "bucket" needs to be able to hold considerably more amounts of water in order to at some point drain the pipes. The "bucket" should also be covered so no light comes through to the water, as this would cause algeas to grow in it. Having a way to drain the "bucket" easily, might also prove to be handy.
Hi! Thanks for this informative video… can I ask what are the little plastic cup things you put the clay pebbles into please?? (They fit perfectly into the holes)
could you please expain about the motor used and where should the both ends put and how is the cycle moving, what is the sponge type used in the plant can it be replaced by something else if not available
Hi there , my Water pump I used 38 watt Max . height 5.2 m Max .flow 5800 L/h My water pump got tow outlets , so I link each 2 pipes together water will flow from pipe to another and back to the tank . If you couldn't find the Sponge ( rockwool ) can replace them with clay pebbles , stone..
Have a 8x12 Greenhouse. Want to go hydroponic. Want to plan a 8x12 U shape system with an inside and outside pvc. Not sure I can do that. Any ideas would help.
what's the size of the hole? It seems your drill bit was diy'ed. Care to share? I'll build one for my wife. Very straightforward and very helpful. Thanks! More subs to come!
Could you tell me where you got the adaptors that you put into the end caps that you fitted into the drilled hole then added the connecting pipe? Thank you.
Thank you for the video. Can you grow cannabis in such setups? I am talking about the root mass. Suppose if I use a 6" pipe, will the space inside and between the holes accommodate the root mass of the autoflowers?
Sorry if this question sounds stupid because I'm also new to the hydroponic system. But what's making the water recycle? Throughout the whole hydroponic system you have?
Hydroponic system . th-cam.com/video/sfa-ga4x8U4/w-d-xo.html
an you send links of buying material online
@@thedeadlyd355
I don't have any , I just buy from local hardware store .
What's the size of hole you drilled?
What's the size of hole?
@@manassharma9496
55 mm
I would drill holes first then seal ends. Easier to clean out plastic pieces
they only sealed one end before drilling... how i would also do it.
Also, put your fittings together on the end cap prior to gluing it on the pipe.
For sure, drill everything first
And clean up those PVC pipe edges
That's my thought too,and it's easier to put the end fittings.
Wow simply amazing....yesterday I visited hydroponics farming near to my place and instantly I fell in love with this hydroponics. ..And I have started searching for diy setup, and I got it in this video..
Thanks a lot for sharing ...
hi there ! thanks
you can visit my channel for more setup designs.
Hi sir ading journey tv galing ng ipinost mo hydroponic garden pwedeng kong gawin yan thank you po godbless
Very good CongratulationsI like it very cleverly imaginativeVERY clever bravo super👏👏👏👏
This was super motivating! [05:53] The results you’re getting are amazing! 💚 Makes me want to keep learning."
you can watch other videos with more info ..
bro i like your video's. im going to try all this and more thank you im going to star a garden pretty soon. God bless you.
Many and many thanks to you for such a simple but helpful video
--- Kishore, New Delhi, India
you're welcome
Most of the drillings could done before you glue the end caps on. Just a thought for convenience sake.
Yes you can drill the holes before you glue the end caps .... thanks for your tip.
Watching here kabayan good morning sau kabayan nice sharing sir
Welcome .
I tried this idea for my sons school project and got first place thank you I will subscribe to your channel
you're welcome
You’ve perfected the two finger in them hole technique 😉
Thank you learned a lot.
a great idea
To anyone reading this, I hope you have an amazing day and stay safe!
would it not be better to leave one end open to get out the cuttings from holes first, then seal both ends
Super genial, saludos desde Bogotá Colombia.
thanks... i love Colombia.
Quality video! And detailed. Noiceee
Thank you ❤️
I believe you can even cut pool noodles into pucks and use those to hold the plants... I've never tried that, but it's on my list lol
very informative video 🇵🇭
Dear please make video on nutrition supplements, it's essential, set up to koi bhi bana lega nutrition kaise dena hai, from 1st stage to harvesting tak iska video banao
Thanks for the video, I have some questions:
1. How do you balance nutrient A and B and measure concentration?
2. Do you have issues with mosquitoes in the water tank?
3. Is this an NFT method or a type of DWC? i ask because the water pressure seems high for NFT.
Very good information and idea
Whats the protocol for water circulation
Wow very very nice. Good Job ❤️👍
Good info. Saya subscribe dan like
Thnx
Good
Nice 1
very nice and simple way to perform
Thank you ❤️
Check this out..you may like .
th-cam.com/video/VK-dpoH5byo/w-d-xo.html
Best video on the internet . Thank you so much . Very Grateful for your insights . Sir I have emailed you, please do revert 🙏
I would suggest screwing the pieces on the end caps before gluing them to the pipes.
Nice 👍
Thank you very much for sharing , this video very helpfull for beginner
Welcome
Wow amazing
❤super❤❤❤❤
the music is god when played 2x
Very good at teaching. Will try it.
Thanks .
Great tutorial 🙏🏻thankyou😇
Welcome.
would have been nice for you to indicate what he brown balls in the grow cups with plants are.. and their use. Also, is it plain water or does the water have nutrients added? thanks for the video on the stand and pipes!
The brown balls is a clay pebbles , you can use lava rock or Hydroponic sponge , it's a grow media to support the plants and provide Darkness to the roots , yes you need to add Hydroponic liquid fertilizer to the water .
Hydroponic is simple just provide the required nutrition and oxygen in the water .
Yes the brown balls or sponges??
@@DIYGARDENWITHBBcan you please tell us what type of nutrient and in what quantity we need to give plants
Yaa your right thort
The hard work you are doing in hydrophonics is appreciable .
At the same time if you think over expenses u e will be suufiicient to do three to five times more agriculture in openland.
The neutrients and natural elements will be abundant in the crop grown on land than any hydrophonics and midde thotas.
The will stick to legs and hands but the satisfaction and economics will be more.
So it left to thinkers and a suggetion only.not discouraging..
Depend on were your home ... And your home have open area to farming ...i think
If cared for properly, hydroponics always provide greater yield
Very nice job
Kreatif. ❤
Wow
Nice I make similar and works great..
looks so great
A lot of that could have been done before gluing on the ends. Would have made it easier.
Yep thanks.
Nice 😀❤️👍
thank you
Thank you
most welcome .
I need this beat !
Im struggling to find the fittings you labeled socket.
Thank you!
Welcome
sir, saan po kayo bumili ng mga fittings? thnx and more power to your channel.
Is that 15cm from center or edges?
❤Thank you❤❤❤❤❤
welcome
What is the name of filltng with thred and washer which connect the elblo with end cap
i would interconnect middle two pipes together , then give only 1 input water, so the water fully circulates
What is that pvc fitting called which you inserted in the hole for water inlet
Hii, im new to this hydroponic and interested to try. you really made it looks doable :) may I ask what did u use for the decoration (like cotton / rocks) at the end of the video? thanks!
Hi there !
Besides the system you need to get net cups , rockwool ( to germinate the seeds ) ,clay pebbles to make the seedlings stand inside that cup and cover the roots from the light .
Check this video you may like the system design , any question please comment I will answer . thnx
th-cam.com/video/VK-dpoH5byo/w-d-xo.html
⁸
Ooof, this stuff is way harder than it looks. Careful so the clay pebbels don't get in the water, cause then the pH goes high n everything turns yellow (using perlite instead is recomendable). Also it is worth mentioning that the pipes get insanely heavy when filled with water, and the water needs to be a certain hight for tiny new things to reach it with their roots. There also need to be a certain angle on the pipes, so the water doesn't build up too much and the shelves (or whatever you use) crash down and break, and I'm not certain about this angle yet, but using PVC to hold up the pipes looks really risky and unstable (especially on only 4 legs like that). Also if you are doing this in an area were you don't wanna spill water, it is worth concidering that the "bucket" needs to be able to hold considerably more amounts of water in order to at some point drain the pipes. The "bucket" should also be covered so no light comes through to the water, as this would cause algeas to grow in it. Having a way to drain the "bucket" easily, might also prove to be handy.
Why is it not possible to do it nice and correctly?
@@DIYGARDENWITHBB Instead of the rockwool cubes can you use Jiffys?
Good job. Thanks.. 👍👍👍👏
Welcome.
Hi! Thanks for this informative video… can I ask what are the little plastic cup things you put the clay pebbles into please?? (They fit perfectly into the holes)
55 mm hydroponic net cup
@@DIYGARDENWITHBB thank you very much BB! I found some :)
Can I also ask what kind of pump you would recommend please?
Good 😊
Thank you .
Hi should we keem pump running all the times are install some timer with it.
Hi there !
You can use timer 15 min on / 15 min off , or on day time and off at night.
I'm curious why you didn't route the water pipes so that is pumps into 1 end and travles through all 4 of the 4" pipes before exiting.
The first or the next tube will overflow before it reaches to the end. The pump stronger , compared to the flow of water from one tube to another.
aeration
could you please expain about the motor used and where should the both ends put and how is the cycle moving, what is the sponge type used in the plant can it be replaced by something else if not available
Hi there , my Water pump I used
38 watt
Max . height 5.2 m
Max .flow 5800 L/h
My water pump got tow outlets , so I link each 2 pipes together water will flow from pipe to another and back to the tank .
If you couldn't find the Sponge ( rockwool ) can replace them with clay pebbles , stone..
bush screw in the end cap first , 1:49 , before pasting end cap
Thank you sure will do next time.
Pl explain water connection in detailed. I AM a housemother and want to do it. So please give details about water connection
Impressive video. Please mention all of the tools also required for this DIY setup.
Hi, I mentioned that in the video. Watch the first minute.
Check this video too
th-cam.com/video/dLEVQw-bHhc/w-d-xo.html
A cada cuanto la circunferencia y al
español...gracias
Wow such an amazing job, but I'm confused just on the fertilizer that you were using to grow it , it's inorganic fertilizer or organic?
not organic..but the same fertilizer they use to grow on soil
What would be the water level and how long would the pump run on for? Would there be cycles?
Im in a tough situation where can i find the pvc tank connector ??
Great build! Good job.
Thank you ❤️
Nice vid sir! Gaano po kalaki yung mga butas sa taas nung 4 inch pipes, and yung mga butas sa cap (gilid) nung 4 inch pipes?
Have a 8x12 Greenhouse. Want to go hydroponic. Want to plan a 8x12 U shape system with an inside and outside pvc. Not sure I can do that. Any ideas would help.
Hi, where you bought the pipes? Or do you know a website where can i buy for a big big farm? Thank you
what's the size of the hole? It seems your drill bit was diy'ed. Care to share? I'll build one for my wife. Very straightforward and very helpful. Thanks! More subs to come!
The hole size is 55 mm , you can check my other videos , got other designs you may like . thank you.
All said and done 😊 but did i miss what feeds the plants its not just water ???
Use hydroponic fertilizer A B.
The last pipe he put, is it having a pump?
what the name of the pvc socket you used or where can i get a similair one ?
you mean tank connector, ask the hardware store at your place..
What is the "grey socket" called. I have looked EVERYWHERE for these and cannot find them!
tank connector
Could you tell me where you got the adaptors that you put into the end caps that you fitted into the drilled hole then added the connecting pipe? Thank you.
That's what I'm trying to figure out
Pipe sellers also sell those adaptors and pipe caps you can show the video clip and buy form local wendors
Thank you for the video. Can you grow cannabis in such setups? I am talking about the root mass. Suppose if I use a 6" pipe, will the space inside and between the holes accommodate the root mass of the autoflowers?
I recommend using the Dutch bucket system
thank you sir
Welcome thanks
What's that soil like substance you've placed the plantlets in
clay pebbles
Having trouble finding the 15 mm PVC sockets. Would you please provide product number and supplier name? Thank you.
System will always have a layer of water, for drainage in middle and not lower on ends...
For flood and drain all water must drain..
Sir parang may mas best setup. Not expert here pero feeling ko mas okey ang flow ng water kung isa lang ang inlet and outlet 😅😅
Yes , my pump strong that's why I made 2 outlet
Sorry if this question sounds stupid because I'm also new to the hydroponic system. But what's making the water recycle? Throughout the whole hydroponic system you have?
I'm using water pump.
What are the small mud cakes that the plants are kept in. What is it made of. Pz reply soon. I have a modal to complete.
Clay pebbles
How does nutrient intake work?
What’s the sizes of holes your drilling into the pipe?
55 mm
Question: why not make it one continuous loop? One water inlet and one outlet? Maybe that's a dumb question since I know nothing about hydroponics
not a dumb question, in hydroponics you need to understand the concept and design your system that suit with your space and other conditions
Anyone know what the PVC part is called the last was used to go from the 4" to the ¾
tank connector
What size pump was used for supply and return ?
35 W .
@@DIYGARDENWITHBB thank you for the video.. simple and to the point 👍🏼
Donyou change water in this system, and is there an easy way to empty these pipes?
How close to the top do you make the intake and output holes water holes?
Hi there !
2 ft
where did you get that thin pvc looks about sch 5
From the local hardware store.
why not connect the two inner PVC pipes and only use one pump hose and one down spout ?
The way he has it aerates the water, no need for a bubbler.
Is it very necessary to add hard water liquid nutrition (a&b) and pH down solution to this system
yes plants need food.