Rebuilding the Engine on our Sailing Catamaran | DIY Diesel Engine Rebuild Part 2
ฝัง
- เผยแพร่เมื่อ 6 ก.ค. 2020
- In part 2 of our DIY diesel engine rebuild, we continue the disassembly all in the cockpit of our sailing catamaran....
We ran into a few hiccups where we didn't have the right tools but with a little creativity and some help from friends we made what we had work.
Part 1: • Rebuilding a 30 Year-O...
Do you want your very own Tula gear? Check out The Tula Shop! - tulasendlesssummer.com/shop-tula/
Want a first look at our videos, up to date location information, and Tula Shop discounts? Become a Patron for all that and more! - / tulasendlesssummer
*Some of the links below are affiliate links and we may earn a small commission if you purchase something through the link.*
For a first-hand look at our favorite boating essentials, camera gear, safety equipment, navigation setup, dive equipment, suggested reading, and much more visit our Amazon Affiliate link. www.amazon.com/shop/fikitensup
Are you into the nitty gritty of how things work, product reviews, and the more technical side of boat life? Check out our other channel, Tula’s Tech Talk! - / @tulastechtalk
Can’t get enough of Jetty the Gypsy? She has her very own channel! Go Subscribe! / jettythegypsy
TH-cam is awesome but we are also on Instagram and Facebook. If you follow us on these platforms you are invited to Q&A’s, polls, and are often much more up to date on where we are!
Billy’s Instagram: @TulasEndlessSummer
Sierra’s Instagram: @TulasEndlessSummer_Sierra
Jetty’s Instagram: @JettyTheGypsy
Tula's Endless Summer Facebook: tulasendlesssummer
All of our most frequently asked questions are answered here:
tulasendlesssummer.com/tulas-e...
A few of our affiliate partners give you discounts!
Siren Marine - bit.ly/SirenMarineTula Use code "Tula10" for 10% off at checkout
Raw Elements Sunblock - bit.ly/RawElementsTula Use code “Tula” at checkout for 10% off!
Hobie Polarized - bit.ly/HobieShades Use code “HPTULA20” for 20% off!
All our music is licensed from Epidemic Sound www.epidemicsound.com/referra... unless otherwise noted here
#tulasendlesssummer #boatlife #sailing
Your ability to mechanically persevere without hesitation or "I can't" conversations is most impressive.
I like your "can do" attitude Billy. Your doing a great job, teaching your viewers that anything is possible with the right attitude. Thumbs up!!
Dude you're motor is shot.
Billy -"I'll rebuild it in my cockpit with limited resources." Legend
🤣🤣🤣🙌🙌🙌
Fearless, follow the manual and don't give up. A true pioneer, guys with your spirit drove their covered wagons westward !
After my time in the US Navy operating and maintaining nuclear power plants on an aircraft carrier, I felt I could accomplish anything. After watching this video, I'm thinking... okay, almost anything.
Impressive work!
You’re a freaking beast man. Jesus. I’m a mechanic and I don’t think I’d attempt what you’ve done. Insane. Mad props.
As a former aircraft mechanic that has overhauled numerous engines, I can say that you're doing a great job with the tools that you have. You should be very proud when that engine once again roars to life.
What happen did you hand it over to the FAA, just wondering I'm a A&P mechanic too.
Dude! Billy... this is the stuff of Legends! Rebuilding the entire engine in the cockpit is epic. I can't wait for the next video! :-)
A Yanmar 2GM is a fine engine and he is doing a very good job of it... Lovely that he can install a full kit including sleeve and new pistons and rings - it really will be a fresh motor again, hope the crank is good and the valves, guides and seats are good too... He is doing a methodical job and is being pretty respectful and careful of the process.
If ever I need to rebuild a diesel motor, on a boat at anchor, in a off shore island, in a windy bay, with minimal tools and a barking dog in the background......you Billy are my man! Absolutely fantastic effort whether it works or not!
Redesigning the socket that way was awesome.
We used to use to 'soak' the sleeves in dry ice for a few hours before inserting them. Worked like a charm. Good job on the build so far!
Amazing! I can't believe you did that on a boat! You could have used a piece of wood to seat that crank, you know, hit the wood with the hammer. But easy to sit here and give you ideas. lol.
Taking the engine apart is EZ , getting the parts and checking tolerances so you get a good rebuild is the difficult part. Your fearless attacking this job!
Dude you are bad ass rebuilding a boat motor on your boat.
Billy, you are an example of people that can do. Never be afraid to try something yourself. Hopefully, there were no parts left over. I use to take the dash off of a '69 Roadrunner. There were always parts left over when I put it back together. I just threw them in the glovebox until the next time I pulled it. Hard to do that with an engine. Guessing all those parts are important. :-) At least now it is easy to video all of the steps as you disassemble something. Good luck and happy sailing.
Wow, this was impressive. To do a rebuild in your cockpit, wow just wow. Hats off man, I am impressed.
Great job Billy, This is what a real sailing channel should show .. warts and all .. not just the sun sea sand and silly stuff. Sierra will be impressed !!!! Stay Safe & Fair Winds !!
Billy's got some balls to take that on, well done, superb innovation where you were stuck for the right tools, you look horribly exhausted, I should think on day eight, if it runs okay you should get quite drunk and sleep for 12 hours. Congratulations.
Billy is the freakin man! Great job man. Been watching forever. Live that life man.
Good boy!!!!! Sleeves in the cold locker!!!! A legit trick on dry liner engines.
Just found your channel and this episode. I thought, “This dude is bananas!”. Respect bruh! I’m speechless, great work!!
An onboard overhaul? You are fearless :)
"I just took this piece off, don't know what it's called " (timing cover) classic.
Can't wait to see who wins ! Not over till it done and runs
Rebuilds under ideal conditions are not easy to accomplish one with limited resources on a sail boat, remarkable!
That is truly impressive! You have some real skills.
Billy, that's what I'm talking about! You have done a great job with little resources and in the end, have shown with a dose of courage to undertake such a project and the smarts to work around obstacles one can successfully overhaul an engine on the back deck. It helps to have the manual.
Crickey Billy, I hope you got an A++ in engine shop class, you obviously paid attention!!
Epic and excellent effort. Rebuilding an internal combustion engine is no mean feat so well done!! Good luck.
I always get my wife to help servicing the engine and everything else on the boat. All that yoga let’s her reach the awkward places and she likes sharing the stress and hassle of boat ownership. Well done for your self determination to do it yourself.
Good thing you've got this video to look back on when putting it back together.I'm very impressed by your ingenuity and drive.
I greatly respect all your skills
Billy. You are great. Kind regards
from a minimalist Swiss lady of
68.
Amazing, I have never seen anyone rebuild an engine following the manual! I know you have had some experience rebuilding gas engine in H.S. or something like that, but it is still amazing! Oh, can't wait to hear what the new chapter holds for you two! Congrats!
I think this is hands down the coolest engine rebuild video I've ever seen. Fantastic video man. And what a ballsy project to take on in your cockpit!!! Great edit by Sierra!
Very impressive how you have stretched your skills and learned so much on your own. It makes watching your adventurers more fun knowing that you make it possible by doing so much yourselves! Great video!
Wow. Luke is a good welder. Supercool special tool 😎
Impressive work. Good job on figuring out how to use tools you have and making that one special tool.
Good luck on rebuilding sailboat Diesel engine! 😀⛵️😘 Mike from Missouri
Quite the undertaking!Good job improvising with the old cylinder sleeve for a piston ring compressor.
I am impressed! Shade Tree Mechanic skills are top-notch.!
You're a weapon Billy... A 2MG. Great engines... Injector timing is going to be fun, but you'll figure that out I'm sure... Can't wait for the startup...
I didn’t take the injector pump off and the timing is determined by the shims it is mounted on so didn’t have to do anything there. I just had to make sure I lined up the timing marks on the gear on the crank shaft and camshaft which was very straight forward and easy
Doing a engine rebuild at sea is insane, however you have to do what you have to do to make it work. It’s awesome you are not afraid to accomplish such a big task. Rebuilding a engine is no joke when you have all the knowledge and tools to complete the project. You should feel proud of yourself.
This is both scary and impressing. And there cannot be enough vids about fixing boats, thats for sure. They all teach me something new.
That's ballsy!!! First time engine build and you're using a beam type torque wrench. That takes some skill by way of knowing what "feels" right in addition to reading the torque on the gauge.
Just going to echo most of the other comments. Your a badass Billy! With a little ingenuity and a lot of determination you showed most anything is possible. Very impressive to rebuild a complete engine on the boat on the water.
Hats off to you for doing this job...particularly on the water. Must admit that I was a little nervous when the stuff was out on your back platform...so close to the water. Great job!
Same here, was waiting for you to have to dive in to retrieve a part.
Great job Billy looks as tho you bout got it whipped. Crossing fingers and toes it runs like a champ after you get it in.
Billy, I give you a lot of credit for rebuilding your diesel on your boat. You are creative and have a “can-do” attitude. I rebuilt the engine in my first car, a Ford 351 Cleveland in my garage when I was 15 years old. This brought back lots of great memories of taking that engine apart piece by piece, cleaning it all up, new bearings and gaskets and putting it back together. I had a Chilton’s manual to guide me through it. Can’t wait to hear that sucker run! Good job so far dude!
Great improvising on the home-made gear puller and ring compressor tool! Your doing an awesome job! It will be worth all the effort when that engine fires up and finally runs.
I think this is the first time i watched your video from start to finish.
Keep fixing!
You are a remarkable young man! Great work you are doing!
I agree with Mark below. I think you are doing an awesome job. She will purr like a kitten when your done. Hats off to you Billy.
Great Job Young Man! This Billy isn't all lifeguard / surfer boy after all!!
I like how you improvise.
"I said 7 days, she said 8. I think i will win the bet"
This really made me laugh!
Enjoyed watching the rebuild nonetheless!
You are a legend! I am impressed.
you need balls to do this job with the materials you only have. congrats Billy. great job. I cant wait to see the next one
Using the old cylinder sleeve as a piston ring compressor was an absolutely genius move!
Billy is one of those gutsy men that make their own luck....good show Billy!
Who knew there were so many engine experts right here on TH-cam? You guys have a highly skilled fanbase! 😉
“Oh nuts!” :)
Billy you’re still doing a good job with all those parts.
Good job. I see so many people attempting a rebuild with a kit but no service manual. The manual can be the most valuable tool to have on your boat.
ABSOLUTELY LOVED the repair montages. Some of my favorite stuff you've done. The junk in your teeth? Not so much. At least Jetty is there to help.
At 12:30 I believe what you were thinking about is a plasti gauge you put a small piece down and torque your bearing caps down and then take them off again to check your clearance.
By far the coolest thing I’ve watched thus far on all of these sailing channels. Your go-getter motivation for you to rebuild an engine on the back of your boat is crazy 😜! Nutz of steal! Kudos to you!
excellent shade tree mechanic skills !!
Hy Billy, if anyone deserves to get this engine run again it’s you. It is awesome to watch you doing this repair. I can’t await to watch the next video! All fingers crossed 🤞👍😘🐝☀️🍀🍀
there's always a solution....nice work!
You are amazing Billy! I would never have the patience for that kind of job. Not to mention all the extra parts I would end up with.🤑😁
Hey Billy, never commented on your channel before today. You've done a great job and fingers crossed for the startup. I read that Sierra and you are expecting a baby. Sad for the sailing channel but a whole new twist on life for the two of you. Congratulations!
Thanks and thanks for commenting. However, we are not expecting a baby.
@@Tulasendlesssummer Sorry for the comment, then. Somebody said that you were in the comments below. Well, I hope you and Sierra managed to link up in St Thomas. Covid-19 is a real sod.
You sir are "IRON MAN"! My hat is off to you and your ability to rebuild the engine!!!
Great job Billy!
For someone that doesn't wrench daily, you are doing a great job. Awesome!
Great job bro!!!!! Amazing that it went all back together!!!!
Cant wait to hear it run!!!!!!!!
Great job proves what pure determination can do and that you don't need a fancy shop to rebuild an engine
My Uncle Vernon would be proud. When you need a tool, you make one.
ok the piston trick for compressing the rings, pretty damn smart.
I totally can relate to how you felt about during the rebuild
Very cool. Highly impressed! 👏
You are so lucky to have all the people you need just around you! If you can't find any welder, a battery may work. Not as good as nice welders tho.
Good Morning! All that hard work.....you left us hanging....Hope you won that bet! Can't wait to see the next video.
Best Billy vid yet
Great Job!!!
Okay , you don't need my comments like, ' was glad to see it was properly lubed before pressing it in ' . . . . .
Was that my K-Mart torque wrench you were using . . . . ? ? Impressed with fabricating the 'special tool' in order to get that nut ! Enjoyed the video . Thanks.
Wow! I'm impressed. Especially with the special tools you crafted ... and just to make it more challenging they closed the stores so you couldn't buy another tool if you wanted. Not only that, but you're working alone and I know there were times when another pair of hands would have been a big help. This will make you appreciate Sierra even more.
Great job!
Props to pelagic for providing board shorts that can stand up to the rigor of engine rebuilds. I’ve got the same greasy oily for engine work board shorts. Haha
Excellent job!
Great job, Billy!!!
Been watching you for quite some time and when you changed all your rigging I was impressed and now you complished we building thisn diesel motor your dam smart I gotta say it specially with the tools that you've had congrats Vegas bill beast
Billy, you are awesome. Can do attitude and positive. Top notch sir.
Awesome job Billy!👍
I drop a nut on my garage floor and cant find it for days... I can only imagine trying to do an engine rebuild on the water. You're a badass Billy!
Mad skills there, Billy!
Best video ever!
That looked like so much hard work ! Good on you Billy.
Great job on the motor !
Not only a good job as a mechanic but also as a TH-camr. Thanks for the lessons.
Super work it all takes time well done 👍