Hey csabi! Yesterday was my birthday and I bought a Brand new KM 56 RC-E with a FS-KM, I've only used it for light trimming and edging but currently it works great.
Hello, happy birthday to you my friend, I’m glad for your purchase, I think once I did use a kombi sistem, real helpful and good machine, greetings,🙋♂️
Hi Csabi! Recently I bought a Brand new Stihl fs 460 c and l am loving it ! Now l need your opinion,which of these two trimer lines cut the best? Yesterday,l was cutting some soft grass with 2.7 mm Cf3-pro and it didn't cut well...
Hello, I have actually 3 favorite trimmer lines, Stihl black round and square 3,3 mm and Stihl CF3 pro also 3,3 mm try one between them and you won’t be disappointed,🙋♂️
Hello Csabi, have you ever had trimmer line weld it self together inside the housing of the trimmer head? It prevents it from feeding and must be taken apart to break it apart. Very frustrating
Hello , it happens only once to me it was very hot outside, I know it’s frustrating, try soaking the line in water like 24 hours before you use it and grease regularly the gearbox , 🙋♂️
@@CsabiToolsΣυμβαίνει σχεδόν πάντα, αλλά οι άνθρωποι της stihl προσπαθούν να ξεφυγουν με διάφορες γελοίες δικαιολογίες! Ντροπή! Το πρόβλημα είναι υπαρκτό! Ανατρέξτε σε Video και σχόλια και θα δείτε το μέγεθος του προβλήματος. Ποιος θα μας αποζημιώσει για τα χρήματα που χάσαμε; Οι ομαδικές αγωγές θα ήταν μια λύση.
Hi, i like all your videos😀😀Can you confirm that the black brush cutter wire has 3.3mm on the side and so the longest diagonal (i think 4,66 mm d=Lx√2) and the cf3 pro has 3.3mm as maximum measurement and consequently the black one is heavier? I can feel it from the engine revs that with the cf3 it goes up more; or am I wrong?
Hello, thanks , yes the black trimmer line it’s 3,3 mm and yes the CF3 pro it’s also 3,3 mm , I never thought off that…. But now if I think about it I believe it’s slightly heavier the black trimmer line,🙋♂️
👋If you can, try to measure with the caliper the diagonal of the black square wire and any section of the cfr pro: I believe that the cf3 pro never exceeds 3.3 mm (indeed, perhaps as a diagonal it is 3.3 mm and as a side it has less) while the black wire has a longer diagonal of 3.3 mm. Furthermore, the cf3 pro creates less air resistance thanks to its spiral shape. In conclusion, I believe that with the cf3 pro the brush cutter strains less and I can feel it from the engine revs. I wanted to ask you if you also feel that the engine revs higher with the cf3 pro or is it just my impression😃😃😃
Are you rubbing the head on the ground when you run it? You want to hover above the ground. Remember you want the tip of the line to do the work. Not the full length from the head to the tip. Both of those create heat and can be causing your melting issues. Advance the line often and that should help too
@@CsabiToolsΠώς γίνεται εσύ να μην αντιμετωπίζεις πρόβλημα με το λιώσιμο, ενώ όπως βλέπεις στα σχόλια είμαστε πολλοί εμείς που νιώθουμε κορόιδα που πήραμε αυτή τη μάρκα; Τι δηλαδή κάνουμε όλοι εμείς λάθος; Είμαστε μήπως χαμηλής νοημοσύνης; Δεν μας λέτε την αλήθεια! Δυστυχώς!
Hello the Stihl cf3 pro it's the best trimmer line from Stihl but it's slightly more expensive, if you don't want to buy expensive line you can purchase the black Stihl round trimmer line also very good, greetings 😀
Üdv Csabi! A kompizt 3 színű damilt jómagam is próbáltam már de sajnos csak kis kiszerelésben lehet itthon kapni, a fekete damil mennyivel jobb mint a kompozit? Üdv Attila
Hello Attila, a 3 szinu damil a legjobb damil amit a Stihl gyart, amugy a fekete damil is nagyon jo valamenyivel gyengebb mint a 3 szinu damil, udvozolek 🙋♂️
Nice comperison video🤟 I use the cf3 pro 3.3mm line in my fs410cem and i love it🥰 Do you sometimes have problems with that the line getts to long and wont break against the knife on the deflector? It happens to me with the 3.3 version.
Hello thanks, no I don't have that problem usually I can cut it real fast, I think you can change the cutting tool on the deflector or try sharpen it a little, greetings 😊
@@CsabiTools अब जैसे हम मशीन चलाते हैं सुबह 7:00 से लेकर के शाम के 7:00 तक चलाएंगे तो उसे हिसाब से तो यह 12 लीटर तेल का लगी मैं होंडा की यम के 450 टी उसे कर रहा हूं वह पूरे दिन में एक बार टैंक भरने पर ढाई घंटे चलता है उसका अगर 10 घंटे भी चलाएंगे तब भी sithi फ्यूचर में
An extraordinary job! Like always 👌
Hello , thanks 😘
Hey csabi! Yesterday was my birthday and I bought a Brand new KM 56 RC-E with a FS-KM, I've only used it for light trimming and edging but currently it works great.
Hello, happy birthday to you my friend, I’m glad for your purchase, I think once I did use a kombi sistem, real helpful and good machine, greetings,🙋♂️
@@CsabiTools Don't you have one? Didn't you make a video about it? Greetings from America🙋🏻♂️
Trimmer line Stihl CF3 pro is very good if you don't cut the bushes. I like it.
Yes indeed, greetings 🙋♂️
Îmi place ceea ce faci bravo felicitări și tocmai ai câștigat un abonat din partea mea respect
Salutare, multumesc, ma bucur ca iti place,🙋♂️
Hi Csabi! Recently I bought a Brand new Stihl fs 460 c and l am loving it ! Now l need your opinion,which of these two trimer lines cut the best? Yesterday,l was cutting some soft grass with 2.7 mm Cf3-pro and it didn't cut well...
Hello, I have actually 3 favorite trimmer lines, Stihl black round and square 3,3 mm and Stihl CF3 pro also 3,3 mm try one between them and you won’t be disappointed,🙋♂️
Nice video, I wonder if fs240 is powerful enough for 3.3mm cf3, currently using 2.7 cf3
Hello, thanks, I think it’s better if you stay with the 2,7 mm , Fs 240 is not that powerful,🙋♂️
Thanks for the advice
Hello Csabi, have you ever had trimmer line weld it self together inside the housing of the trimmer head? It prevents it from feeding and must be taken apart to break it apart. Very frustrating
Hello , it happens only once to me it was very hot outside, I know it’s frustrating, try soaking the line in water like 24 hours before you use it and grease regularly the gearbox , 🙋♂️
@@CsabiToolsΣυμβαίνει σχεδόν πάντα, αλλά οι άνθρωποι της stihl προσπαθούν να ξεφυγουν με διάφορες γελοίες δικαιολογίες! Ντροπή!
Το πρόβλημα είναι υπαρκτό!
Ανατρέξτε σε Video και σχόλια και θα δείτε το μέγεθος του προβλήματος. Ποιος θα μας αποζημιώσει για τα χρήματα που χάσαμε;
Οι ομαδικές αγωγές θα ήταν μια λύση.
so almost wonderful beautiful video friend Csabi
Hello, thanks so much my friend, greetings 🖖
@@CsabiTools how are you? no problem my best friend
@@jvenema86 hello, thanks I'm fine with a lot of work, how are you my friend.
@@CsabiTools that’s great here yes now i’m ferry fine
Hi, i like all your videos😀😀Can you confirm that the black brush cutter wire has 3.3mm on the side and so the longest diagonal (i think 4,66 mm d=Lx√2) and the cf3 pro has 3.3mm as maximum measurement and consequently the black one is heavier? I can feel it from the engine revs that with the cf3 it goes up more; or am I wrong?
Hello, thanks , yes the black trimmer line it’s 3,3 mm and yes the CF3 pro it’s also 3,3 mm , I never thought off that…. But now if I think about it I believe it’s slightly heavier the black trimmer line,🙋♂️
👋If you can, try to measure with the caliper the diagonal of the black square wire and any section of the cfr pro: I believe that the cf3 pro never exceeds 3.3 mm (indeed, perhaps as a diagonal it is 3.3 mm and as a side it has less) while the black wire has a longer diagonal of 3.3 mm. Furthermore, the cf3 pro creates less air resistance thanks to its spiral shape. In conclusion, I believe that with the cf3 pro the brush cutter strains less and I can feel it from the engine revs. I wanted to ask you if you also feel that the engine revs higher with the cf3 pro or is it just my impression😃😃😃
Hi Csabi!
Can you please make a video on how you clean your brushcutters?
Yours always look brandnew in your videos😁
Hello, yes in the future I will make a video like that, I clean them with water and a towel, 🙋♂️
@@CsabiTools ok😁
Do you use a pressurewasher or just a regular gardehose?
@@johanericson1854 only a bucket of water and a soft brush and after that a dry towel.
Hey Csabi. So how do you change line on a weed wacker. The line on mine is short and just need to know how to change it.
Hello Jacob it’s hard for me to explain it like this, here I have a video and hopefully it will help,🙋♂️th-cam.com/video/0QSdNxMo0P8/w-d-xo.html
do you always use the machine at full throttle or not?, does that not spoil the machine? help me I'm starting
Yes, always use your small engines at full throttle! If you don't it can cause extreme or irreversible damage to your machine
3.3 stihl very good👍
Hello, yes indeed very good trimmer line,🙋♂️
Estimado amigo con tu experiencia cual es el hilo mas resistente para cortar maleza fuerte?
The most durable for me it’s Stihl CF3 pro 3,3 mm and Stihl black round 3,3 mm,🙋♂️
@@CsabiTools gracias
Hi csabi how do you keep the line from melting
Hello, honestly to be I never occurred this issue with my machines,🙋♂️
Are you rubbing the head on the ground when you run it? You want to hover above the ground. Remember you want the tip of the line to do the work. Not the full length from the head to the tip. Both of those create heat and can be causing your melting issues. Advance the line often and that should help too
@@logjammin084Υποθέσεις...
@@CsabiToolsΠώς γίνεται εσύ να μην αντιμετωπίζεις πρόβλημα με το λιώσιμο, ενώ όπως βλέπεις στα σχόλια είμαστε πολλοί εμείς που νιώθουμε κορόιδα που πήραμε αυτή τη μάρκα;
Τι δηλαδή κάνουμε όλοι εμείς λάθος; Είμαστε μήπως χαμηλής νοημοσύνης;
Δεν μας λέτε την αλήθεια! Δυστυχώς!
Thanks for good video .
I have oregon scareline 3.75mm for my 555 husqvarna.
You should test that line
And make a video
Hello, I never tested Oregon trimmer line, I will try to find it online, thanks for the advice,🙋♂️
Ciao e complimenti.Quali consigli tra i due fili su un fr 410.Starei sul 3.3?Grazie
Hello the Stihl cf3 pro it's the best trimmer line from Stihl but it's slightly more expensive, if you don't want to buy expensive line you can purchase the black Stihl round trimmer line also very good, greetings 😀
What trimmer head fits on 2024 FS 561 ? I can't find the part numbers for the trimmer head or string trimmer line??
On the Fs 561 you need the Stihl autocut 56-2 trimmer head with the part number : 4005 710 2107
do you always use the machine at full throttle or not?
Hello, not always, but if the grass it’s big and thick, usually full throttle,🙋♂️
Üdv Csabi!
A kompizt 3 színű damilt jómagam is próbáltam már de sajnos csak kis kiszerelésben lehet itthon kapni, a fekete damil mennyivel jobb mint a kompozit?
Üdv Attila
Hello Attila, a 3 szinu damil a legjobb damil amit a Stihl gyart, amugy a fekete damil is nagyon jo valamenyivel gyengebb mint a 3 szinu damil, udvozolek 🙋♂️
@@CsabiTools
Teljes mértékben egyetértek Veled Csabi és köszönöm szépen a segítséged, véleményed!
Üdv Attila
Nice comperison video🤟
I use the cf3 pro 3.3mm line in my fs410cem and i love it🥰
Do you sometimes have problems with that the line getts to long and wont break against the knife on the deflector?
It happens to me with the 3.3 version.
Hello thanks, no I don't have that problem usually I can cut it real fast, I think you can change the cutting tool on the deflector or try sharpen it a little, greetings 😊
👍👍👍👍
Salutare ,🙋♂️
Which is better , 561 or 560?
Hello, both of them are really good but I will choose the Fs 561,🙋♂️
एफएस 561cपूरे दिन में कितना लीटर पेट्रोल पी लेती है?
It consumes around 1 liter \ hour ,🙋♂️
@@CsabiTools अब जैसे हम मशीन चलाते हैं सुबह 7:00 से लेकर के शाम के 7:00 तक चलाएंगे तो उसे हिसाब से तो यह 12 लीटर तेल का लगी मैं होंडा की यम के 450 टी उसे कर रहा हूं वह पूरे दिन में एक बार टैंक भरने पर ढाई घंटे चलता है उसका अगर 10 घंटे भी चलाएंगे तब भी sithi फ्यूचर में
फोर स्ट्रोक अगर लांच करता है तो वह सबके लिए बहुत अच्छा होगा और स्टील की मार्केट ऐसी बन जाएगी किसका कोई मुकाबला नहीं कर सकता
ชอบดูมาก
#LIKE 👍🏽👍🏽👍🏻👍🏻🏆🏆
🙋♂️
stihl is best. like 68
Hello, yes indeed, thanks 🙋♂️
Can I have the Stihl FS 560c
Hello, sorry it’s not for sale,🙋♂️
Okay
cf3-pro costs a lot more
Hello, yes indeed,🙋♂️
Tuțu se aud sunete ciudate în casă hai repede acasă
😂😂😂😂