Making Soft Plastics With SINGLE Cavity Molds From eBay!
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- In this video, I am testing out some different style molds that i have never seen before. Each Mold is a single cavity, so it takes some time to make a good amount of them. Stay tuned to see the results and see how YOU feel about them!
💎💎💎💎💎
••••Website••••
www.Rockymountainbaits.com
⬆️Check out the website above to see a WIDE selection of soft plastics AND Jigs!
⬇️INSTAGRAM⬇️
@Rocky_Mountain_Baits
This channel was created to help people in making soft plastics and jigs. RMB is my pride and joy and has saved me. All feedback is greatly appreciated and thank you for taking the time to view!
⬇️MOLD COMPANIES⬇️
⚠️SOFT PLASTICS⚠️
Anglingai.com
BTSmolds.com
Basstackle.com
Stankxbaitco.com
⬇️PLASTIC⬇️
Deadonplastixllc.com
⬇️INJECTORS⬇️
10oz Basstackle Single Injector
9.5oz DO-IT Molds Single Injector
6oz Basstackle Dual Injector
⬇️Soft Plastic Supply Companies⬇️
Lureworks
Dead On
MF Manufacturing
⬇️FISHING REELS:⬇️
⚠️BAITCASTERS⚠️
Shimano Metanium DC
Shimano Scorpion DC
Shimano Excense DC
Shimano Curado DC
Lews Mach Smash
Lews Mach Crush
Lews Mach II
Quantum Smoke HD
Quantum
Piscifun Phantom
Abu Garcia Silvermax
⚠️SPINNING⚠️
Lews Mach Smash
Lews Mach I
Piscifun Venom II
⬇️CAMERA GEAR⬇️
📸📸
CANON M50
-Canon 15-45mm lens
-Rode Mic Compact
💎 💎
CANON SL3
-Canon 18-55mm lens
💎 💎
GoPro Hero 5
GoPro Hero 7
⚠️DRONE⚠️
DJI Mavic Mini
💎KAYAKS💎
X2 Ascend 12T
All Video Clips are 100% mine.
Use the big clamps all in between it
Great video! Thanks for the advice
A couple tips:
1. Use your bar clamps to clamp several molds together so they won't tip over and will be held together better and won't have the flashing issue or fill the vents much either.
2. If you spray the inside of the cavities with some high heat gloss paint the baits will release and you won't have to coat the molds every time you use them. It will also give the baits a smoother finish.
Pressure on the injector will push the molds apart using sping clamps.
Thanks for the tips! Not sure if I will ever use them again, but good to always have in the back of my head just in case!
Grab a paint brush and use canola oil just a tiny bit itll make it so they dont stick and also give it a shinnier tint to them instead of them looking real pail
I appreciate the comment. I’ll try that if I ever use them again, which most likely won’t be anytime soon.
Thanks for doing this video. This experiment gives me a strong appreciation for the high quality aluminum molds that are available from companies like AAI, Bass Tackle, BTS, etc.
How long do you let the plastic sit for after you put it in the mold
It should be good to take out after a couple minutes
i'm going to try some of these i use cooking spray as mold realese...subbed mate good job
That’s not a bad idea! Thank you for the sub! I appreciate it very much
Hey bro.. We're those fusion x molds?..
Two of them were I believe.
@@rockymountainbaits5388 thanks
Really enjoy watching you work brother! Got my sub
Thank you! I appreciate it! I'll have to look at your stuff when I can get to my computer!
Awesome video man love the melting content! Keep up the good work
Thank you!!
They all looked really nice for ebay molds! Have you tried a release spray? Just curious in getting all my stuff ready to make my own this winter. Or is it the material of the mold?
I have not tried any mold release but I put a little worm oil in and it helped a little but I think a few are the material the molds are made out of
@@rockymountainbaits5388 thanks man
You probably already know this but I find that if you put a light coat of vaseline in the mold they will come out way easier and they will be really oily