Tenda MW6 2PK Mesh System WiFi Dual Band AC1200 | Unboxing, installation / configuration tutorial and test. You can find it on Amazon: amzn.to/37qDCrM www.trafegon.com
Thanks for this video, I have a question: it's impossible to have the same connection of the main router? You have to create another connection with Tenda routers, right?
because it's mesh technology u dont need another ethernet cable to activate the 2nd nodes, but u need 1 if u want LAN connection from the nodes to your PC
I hope someone here can help me with this. I have four MW3 mesh3F nodes and one mesh3 node, which I believe is a MW6? My question is which node is best to use as the main one connected to the router. One of the mesh3F or the mesh3? Or doesn't it make a difference.
Can you add the second node not via wifi but instead with a cable connected directly to it? Can't seem to add it as a second node whenever I go through the "Add another node" option. It connects via wifi still.
uMuy buen video, una pregunta, este sistema MW& se puede coinectar por ethernet para que la señal sea mas fuerte y no pierd apotencia en las paredes, o solo se conecta por wifi entre ellas y tambiern que opinas de comprar el MW6 o el MW3, m,i apro es pequeño, poer quiero un amuy buena señal
What about speed and ping between routers? MW6 is up to 1200mbit, can I get 1GBPS connection between two laptop connected via cables - first to tenda1 and second to tenda2? Thx. If using 3or 4 tenda routers, is the traffic splitted and pushed over mesh node with less load?
Hello po. I'm confused. Kasi po yung ethernet currently nakakabit sa PLDT wifi/modem... (when I try to look nasan ang kabilang dulo- cannot figure out kc yung taga PLDT ang nag set up) so hindi ko po alam kelan ko gagamitin yung blue cable (ethernet) at yung white flat cable (LAN) na kasama ng package?? You have done wonderful job in showing it pero would you be kind to explain?
Hola que tal estas? Tengo un problema con los NOVA 6, tengo enchufado correctamente el NOVA a mi router. El internet funciona perfectamente, pero tengo un Apple TV enchufado también al router por cable. Pues los dispositivos que tengo enchufados con wifi al NOVA no interactúan con el Apple TV que tengo enchufado al router. Si conecto el Apple TV al switch del NOVA ya funciona perfectamente, pero no mis luces Hue conectadas al router. Me podría dar una solución? Gracias
QQ, I have the same devices but they disconnect internet frequently, and suddenly it back after 5 seconds, do you what could it be? If I connect to my router wifi it doesn't happen
U connect one cube with the ethernet cable to your router! any other cube you just have to connect to the electricity, not to far away from the "main"-cube, which is connected to the router. Hopefully i was able to help u
Sir... Is it normal po ba to have a 25 mbps subscription sa pldt then when I used this tenda nova mw3 mesh......umabot ng 70 to 90 mbps both download and upload. Does it affect po ba Ang bills namun sa pldt nyan? Or is it normal pa din ba? Salamat po sir
LAN connection maximum speed (input) is only 100 mbps. Then what is the point in having higher MBPS wifi output. Its not a booster. So output wifi is always going to be same as input through LAN that is maximum 100 mbps.
![[Re:all TREASURE] EP.6 in 방콕ㅣ🚩 쩡캠의 방콕 투어 빵 마이 와이 👍](http://i.ytimg.com/vi/uyFw-nItA_s/mqdefault.jpg)
Useful links / Link Utili
Reset: th-cam.com/video/ucf4Wn2yiT4/w-d-xo.html
Photos: www.trafegon.com/photo-review-detail.php?item=tenda_mw6
Speed test: www.trafegon.com/speed-test.php
Prezzo Amazon (.it) : amzn.to/2AOoqsW
Amazon (.com) price: amzn.to/37LxLxs
THE best non verbal tutorial I've seen, when it comes to setting up a wireless/wired mesh network.
Thanks friend!
The best video explanation of nova installation and setup! Thank you pal!
Thanks to you for watching 😉
can you connect each node with the ethernet cable to the router if the nodes are too far away from each other?
Thanks for this video, I have a question: it's impossible to have the same connection of the main router? You have to create another connection with Tenda routers, right?
Thanks for the tutorial, I've just purchased this.. hopefully it does the job
Thanks to you for watching my video, I consider it a good product.
Can I connect the second node via cable and use a port on it to connect to a PC as well?
because it's mesh technology u dont need another ethernet cable to activate the 2nd nodes, but u need 1 if u want LAN connection from the nodes to your PC
Can I plug the satellite cube to an Apple TV? Will the speed be as optimal as if it was plugged to the source?
What is the first music name?
How is that it's faster on WiFi on your laptop than compared on LAN?
How do I connect to the secondary node? The second node doesn't show the wifi connection on my phone's wifi settings. Please reply. Thank you
What if you have 100mbps in speed?, is it can still transfer the whole speed?, or the nova can only produced 10mbps?
Hello, when I connect my 2nd Nova it's says cannot be found , do i need to use another cable and connect it to modem, thanks
I hope someone here can help me with this. I have four MW3 mesh3F nodes and one mesh3 node, which I believe is a MW6?
My question is which node is best to use as the main one connected to the router. One of the mesh3F or the mesh3? Or doesn't it make a difference.
Is it possible to connect tenda wirelessly? or does it really need to be connected wired to the router for it to be able to access the internet
What does the (…) means and do and is used for
Hi, how would these wifi extenders help if my place has no deadspots? My current internet provider gave 2 for free?
Can you connect a switch to expand the LAN connection on the first mesh?
hi sir .. when i unpluged the utp cable my mesh connection was blinking red .. please help me .. thanks
Can you add the second node not via wifi but instead with a cable connected directly to it? Can't seem to add it as a second node whenever I go through the "Add another node" option. It connects via wifi still.
How can i connect to 2nd node if it is not connected in routher?
Excellent video.
Thank you!
Can someone help the nova WiFi for some reason does not come on do I need to port forward my router or something
uMuy buen video, una pregunta, este sistema
MW& se puede coinectar por ethernet para que la señal sea mas fuerte y no pierd apotencia en las paredes, o solo se conecta por wifi entre ellas
y tambiern que opinas de comprar el MW6 o el MW3, m,i apro es pequeño, poer quiero un amuy buena señal
Hi the primary unit must be always connected to the router ?
Yes, modem or router
Thanks, select bridge or DHCP mode?
DHCP.. just plug with a rj45 and deactivate your router wifi
Hi need help my mw6 tenda has red light how to fix
Do the distance between the mesh affect the speed even though they are all green?
What about speed and ping between routers? MW6 is up to 1200mbit, can I get 1GBPS connection between two laptop connected via cables - first to tenda1 and second to tenda2? Thx. If using 3or 4 tenda routers, is the traffic splitted and pushed over mesh node with less load?
I connect to the internet via wifi on my PC. How do I see the Tenda network of nodes on my PC?
Do u need to plung in the WiFi Idk
Bro now what ur opinion about inspiron 5370 laptop and also try to mention price details when you make on purchase
merci tres clair comme video
Thanks for watching 😉
When going to the app is just says “connect to the wifi network of tenda device”
Hello po. I'm confused. Kasi po yung ethernet currently nakakabit sa PLDT wifi/modem... (when I try to look nasan ang kabilang dulo- cannot figure out kc yung taga PLDT ang nag set up) so hindi ko po alam kelan ko gagamitin yung blue cable (ethernet) at yung white flat cable (LAN) na kasama ng package?? You have done wonderful job in showing it pero would you be kind to explain?
Thanks
Thanks to you for watching 😉
Tenho um problema com o aparelho, instalei tudo igual ao video mas a segunda torre continua com a luz vermelha
Hello sir, pwede po ba kahit di na need e connect yung Ethernet cable? Nakasulat kasi na pwede sya wireless 😅
Pano ung isa need paba iconnect sa wlan?
nice tenda, i want to buy this nova mesh
Thanks dude for the video !! . Can I set up 6 devices together ?? . My house has three floors .
I think you can connect many more devices without any problems.
@@trafegon thanks ♥️
is it working well?
@@themstf1 yeah it worked very well 👍🏻 but as wired connection between the nods , it's much better than wifi
What mean my nival blink red cox when open blink green after awhile blink read what is problem
Hola que tal estas? Tengo un problema con los NOVA 6, tengo enchufado correctamente el NOVA a mi router. El internet funciona perfectamente, pero tengo un Apple TV enchufado también al router por cable. Pues los dispositivos que tengo enchufados con wifi al NOVA no interactúan con el Apple TV que tengo enchufado al router.
Si conecto el Apple TV al switch del NOVA ya funciona perfectamente, pero no mis luces Hue conectadas al router.
Me podría dar una solución?
Gracias
is there a way to force to 5ghz? turn off 2.4ghz?
QQ, I have the same devices but they disconnect internet frequently, and suddenly it back after 5 seconds, do you what could it be? If I connect to my router wifi it doesn't happen
Hola más o menos Aque Distancias están los Nodos Del Nodo Primario, es decir el nodo queva Conectado,al Router, dé Su Operador
Thank u !!
Thanks to you for watching 😉
Sir what happen to my 1 nova still red. In your video is both green
@ sam rungklin same here solid Red. Can you help us?
sabe me informar como faço para acessar as configurações no pc pela porta lan? aqui não tenho acesso no @t e nem pelo @t
Este dispositivo permite bloquear contenido Web??
Saludos!
is tenda mw6 support 5ghz?
What router you have?
The intro music you've chosen is not suitable for late night youtubing. It's likely to wake anyone in the house. Just a thought for future videos.
Don’t like it ? Don’t watch it
Ótimo video, obrigado.
我使用这款产品两年了，它比较方便，适合家里的老人，但是缺点很明显，温度高的时候会使4网络降速，尤其在下载游戏时，在夏天经常‘罢工’
想問一定要一對一nova嗎？還是可以單一使用
helllo . how much is diference from 1st cube to the 3rd on speed .
It depends...
Thanks for the tutorial!!!
Thanks to you for watching 😉
Can i connect the units using ethernet cable?
U connect one cube with the ethernet cable to your router! any other cube you just have to connect to the electricity, not to far away from the "main"-cube, which is connected to the router. Hopefully i was able to help u
you can also connect them with ethernet cable, but it looks shit :D even if the performance should be better, yes
8-10 Mbps....?
he's got shitty isp
with that mw6 he needs 200mbps to make it efficient
Sir... Is it normal po ba to have a 25 mbps subscription sa pldt then when I used this tenda nova mw3 mesh......umabot ng 70 to 90 mbps both download and upload. Does it affect po ba Ang bills namun sa pldt nyan? Or is it normal pa din ba? Salamat po sir
Thank You!
Thank you for watching! ;-)
Linux rocks :-)
Yeah! 😉
Jejeje 10 Megas con 40 de Ping?... Con eso si me da TurboLAG en mis juegos Online 😅
Ça ne marche pas...
Y q hace si no tengo router
No te serviran de nada los cubos
Bro doesn't have a router 😂
LAN connection maximum speed (input) is only 100 mbps. Then what is the point in having higher MBPS wifi output. Its not a booster. So output wifi is always going to be same as input through LAN that is maximum 100 mbps.
maximum wired transfer rate of MW6 is 1Gbps
ever heard of gigabit internet?
your connection it's ridiculus
I know, low speed connection is a big problem in Italy
BGM is too annoying
Es la peor compra q he hecho...nunca más estos NOVA baratos...desastre!
The tenda nova is an awful product, avoid the firmware upgrade is too large, and doesn't update ever.
I muted this video immediately