Beyond this VS2600 training video, what are the optimal speed settings and durations in hours given 600-3000 rpm, the volume of the pool, the size of the piping, the cost of electricity kWH, type of filter cartridge, temperature of the water and other appropriate variables, Seems like this could be reduced to a graph for us users. Thanks Rich FLL
Hello Mr Jin, please private message your email address and phone number on our Facebook page or Twitter profile or email us at marketing@hayward.com and we'll ask a Hayward tech to get in touch to discuss.
Does this have a built in timer or do I need a separate timer? I just don’t want to run it during Peak hours and do low speed the rest of the day with 2 hours of high speed. Is that possible or a good plan for 10,000gallons
Hi again! Please contact technical support for your inquiry. Support is available during the work week by calling our support line at 908-355-7995 or by private messaging on Twitter or Facebook.
Hi. I'm wondering if it's okay to run this pump at max speed all the time ? Anything below that and the spillover will not function properly. I'm also wondering if it's okay for my 16,000 gallon in ground pool ? Last question, if both are okay, is there a way to quiet it down ? Perhaps putting rubber underneath it ? It's way too loud. Thanks.
Perhaps I'm losing it but for the sake of me I cannot find the private message button on your page. Could you initiate the message so I can reply ? thanks.
Hi Remlig, our tech would be able to help. Please dm your phone number and email address and they will contact you next week. Or you can email us at marketing@hayward.com.
I just purchased the Hayward Super Pump VS and it does not match the configuration as described. On the pump I received you do not set the run time by setting a number of hours from 30 minutes to 23 and a half hours but you have to set a start and stop time for V1, V2, and V3. Also default settings are V1 at 1500 rpm from 12:00PM-8:00AM, V2 at 8:00AM to 12:00PM and V3 Deactivated and not what this video shows.
Sean Murphy Would you like to speak with our Hayward tech? If so, please provide your phone number and we will call you. You can private message your number on Facebook.
Hi Rich, we’d need to know the model number of the pump. You will find the model number on a black and silver label near the square basket lid. Also private message your phone number on Facebook if you’d like someone to call you on Monday.
The 64 failure code on the SP2600VSP means there is a circuit error in the drive on top of the motor. The only repair is to replace the drive and motor. It would be a different motor and drive but update from the original. The part number for the motor and drive is SPX2600Z1VSPE. Please private message your phone number to our Facebook page if you would like to discuss.
My pump seems to have suffered a brain fart. Even after trying to reset to default, all I get is a flashing reset. It will not reset. It will not run. And I too do not know how to “DM” via TH-cam. Gonna have to buy a new pump I reckon.
Hayward Pool Products thank you for that I do understand that pump a little better now but one of my accounts has one and it is certainly not as easy to program as the eco star.....
@@HaywardPoolProducts can you please provide a video with new model or contact info. This is not my pump display and I cannot get it right even manual is different.
A+++ excellent guide.... thanks so much.
Glad it was helpful!
Beyond this VS2600 training video, what are the optimal speed settings and durations in hours given 600-3000 rpm, the volume of the pool, the size of the piping, the cost of electricity kWH, type of filter cartridge, temperature of the water and other appropriate variables, Seems like this could be reduced to a graph for us users.
Thanks
Rich
FLL
Nice video. Will the pump run v3 setting everyday (i.e. every 24 hours) for the set time or it only does it when you stop/start the system?
Hello Mr Jin, please private message your email address and phone number on our Facebook page or Twitter profile or email us at marketing@hayward.com and we'll ask a Hayward tech to get in touch to discuss.
It would be great if your reply aren't private as we are all here to learn from each others.
Does this have a built in timer or do I need a separate timer? I just don’t want to run it during Peak hours and do low speed the rest of the day with 2 hours of high speed. Is that possible or a good plan for 10,000gallons
Hi again! Please contact technical support for your inquiry. Support is available during the work week by calling our support line at 908-355-7995 or by private messaging on Twitter or Facebook.
Hayward Pool Products thank you I will call tomorrow since I am new to this.
Please update this video to reflect the new version. The setup is now very different. Thanks.
Hi. I'm wondering if it's okay to run this pump at max speed all the time ? Anything below that and the spillover will not function properly. I'm also wondering if it's okay for my 16,000 gallon in ground pool ? Last question, if both are okay, is there a way to quiet it down ? Perhaps putting rubber underneath it ? It's way too loud. Thanks.
Our tech would like to speak with you. Please DM your phone number and he will call to help.
Hi Eli, please private message your phone number for a call from our tech.
Perhaps I'm losing it but for the sake of me I cannot find the private message button on your page. Could you initiate the message so I can reply ? thanks.
Where can I find a replacement digital screen?
Please check with your local Hayward dealers. Find them here: www.hayward-pool.com/shop/en/pools/Dealer-Locator?langId=-1.
Hi, I got err 1 code : how do I fix it? It will not reset. Please help, thanks
Hi Remlig, our tech would be able to help. Please dm your phone number and email address and they will contact you next week. Or you can email us at marketing@hayward.com.
Hayward Pool Products Good evening. Thank you for your prompt response. I would appreciate it very much. My email gilmun80@gmail.com
I just purchased the Hayward Super Pump VS and it does not match the configuration as described. On the pump I received you do not set the run time by setting a number of hours from 30 minutes to 23 and a half hours but you have to set a start and stop time for V1, V2, and V3. Also default settings are V1 at 1500 rpm from 12:00PM-8:00AM, V2 at 8:00AM to 12:00PM and V3 Deactivated and not what this video shows.
Sean Murphy Would you like to speak with our Hayward tech? If so, please provide your phone number and we will call you. You can private message your number on Facebook.
Sean Murphy Sean, this video was made before we changed the Super pump VS programming to make it more friendly.
my pump shuts down and gives me Err04, what does this mean
Yves, what is your pump model number please?
getting error code 64.anyway to fix this
Hi Rich, we’d need to know the model number of the pump. You will find the model number on a black and silver label near the square basket lid. Also private message your phone number on Facebook if you’d like someone to call you on Monday.
@@HaywardPoolProducts sp2600vsp
The 64 failure code on the SP2600VSP means there is a circuit error in the drive on top of the motor. The only repair is to replace the drive and motor. It would be a different motor and drive but update from the original. The part number for the motor and drive is SPX2600Z1VSPE. Please private message your phone number to our Facebook page if you would like to discuss.
My pump seems to have suffered a brain fart. Even after trying to reset to default, all I get is a flashing reset. It will not reset. It will not run. And I too do not know how to “DM” via TH-cam. Gonna have to buy a new pump I reckon.
Hi Jay, happy to help. Someone can contact you, probably after Christmas if you’d like to DM your phone number via Twitter or Facebook.
That pump is a real pile
Hi Tim, if you’d like tech help, please DM your phone number and our tech will call you today.
Hayward Pool Products thank you for that I do understand that pump a little better now but one of my accounts has one and it is certainly not as easy to program as the eco star.....
@@HaywardPoolProducts can you please provide a video with new model or contact info. This is not my pump display and I cannot get it right even manual is different.