ความคิดเห็น •

  • @tomcobblie6328
    @tomcobblie6328 5 หลายเดือนก่อน +9

    Ok guys done this a number of times now and have these suggestions to open the locked door. Remove the door card as shown then push the long silver horizontal rod towards the door lock and open the door with the outside handle at the same time. The long rod is connected to the White plastic lock mechanism that Larcs was trying to lever up to release the door lock.

    • @LarcsWorkshop
      @LarcsWorkshop 5 หลายเดือนก่อน

      Thanks 👍

    • @ArneRadelj
      @ArneRadelj 4 หลายเดือนก่อน +2

      will I be able to open/lock the door from inside(with door panel on) after opening it one time after now being perma-locked? Or is lock change mandatory? It seems to crazy for me to remove the window and all... maybe rather leave it locked because I dont use it much... On my front door it does not unlock via central locking but I can unlock it manually when pulling lever... hope to do that with rear as well.. such a nightmare

    • @LarcsWorkshop
      @LarcsWorkshop 4 หลายเดือนก่อน

      @@ArneRadelj Normally it's a one time deal just to get it open to replace the lock.

    • @stevemasonofficial
      @stevemasonofficial 3 หลายเดือนก่อน

      @@ArneRadeljIt’s an Mot failure unfortunately. Happened to me last week.

    • @TheIdiotPlays
      @TheIdiotPlays 3 หลายเดือนก่อน +1

      ​@@ArneRadeljIf you can not open it from the inside as well, you have to drill a hole on the door where the deadlock arm is and unscrew it. There are a few threads with info about it, theyre hard to find though and youtube will delete this if i link them.
      I was 2 minutes away from scrapping my golf 4 for a deadlocked door, I will try the drill and unscrew method tomorrow as a last ditch effort. I will probably forget to post an update so comment if you want one.

  • @eazy-EPB2020
    @eazy-EPB2020 11 วันที่ผ่านมา +1

    Thank you man after a painfull 5 hours I managed to get this done

    • @LarcsWorkshop
      @LarcsWorkshop 11 วันที่ผ่านมา +1

      @@eazy-EPB2020 Thanks, no problems, well done for sorting it out 👏.

  • @jananfang1288
    @jananfang1288 11 หลายเดือนก่อน +4

    Good job Larcs. Unfortunately, I only saw your video today. I almost broke my door yesterday. I drilled several holes and removed a piece of sheet metal to unlock the lock. Looks a bit brutal now...but the door opens again. Your method is very elegant. 😀

    • @LarcsWorkshop
      @LarcsWorkshop 11 หลายเดือนก่อน

      Thanks, at least you got it sorted in the end 👌.

  • @harrypalmer1
    @harrypalmer1 ปีที่แล้ว +2

    You've done better than me Larcs. I've been following a few TH-cam vlogs, most recently a South African fella, who drilled two holes south & southeast of that hole, to expose the grey piece you've been looking at. I'm still not there! It just isn't shifting. Maybe somehow the child lock went on -what then? I was told this was an MOT failure, so found another garage. But it's been 3yrs now! Luckily nobody ever sits in the back, but I may have to take this to a VW garage. My Golf GT is the same age/engine - you get attached to them don't you lol.

    • @LarcsWorkshop
      @LarcsWorkshop ปีที่แล้ว +1

      Thanks. Yes, they're great cars aren't they. I just kept at it and it eventually went, it almost needed to be done twice in a row? Good luck sorting it out 🤞.

  • @R-eView-einVersuchisteswert
    @R-eView-einVersuchisteswert 11 หลายเดือนก่อน +1

    great job,..tkanks a lot..👏

    • @LarcsWorkshop
      @LarcsWorkshop 11 หลายเดือนก่อน

      Thanks, no problems 👍

  • @Matchat11
    @Matchat11 2 หลายเดือนก่อน +1

    thanks it was very helpfull.

  • @emmanuelkarpathios4372
    @emmanuelkarpathios4372 5 หลายเดือนก่อน +1

    I also couldn't open the door but ruther than drill and cut I put a s c rewdriver from the outside carefully past the door seal to where the lock striker presing towards the door and pulling on the internal oppening chord and it opened.

    • @LarcsWorkshop
      @LarcsWorkshop 5 หลายเดือนก่อน

      Thanks for that 👍. Good job sorting it out 👌.

  • @jarosuros3814
    @jarosuros3814 11 หลายเดือนก่อน +2

    In my case same issue w. the RR doorlock, however it is unclear where is the problem. In my case push the lock hinge and pull the latch did not worked. I've tried for almost two hours.
    However I have tried several times to open the door puling outside handle and suddenly lockhinge was not stucked in the lock podition anymore and I was able to move with him. Maybe the combination of moved helped to get end position for electric actuating of motor inside the lock.

    • @LarcsWorkshop
      @LarcsWorkshop 11 หลายเดือนก่อน

      At least you got it sorted 👍. Could have been anything, change in temperature, vibration etc? Some people get away with just banging on the door and it goes. Who knows?

  • @toiletgaming2005
    @toiletgaming2005 7 หลายเดือนก่อน +2

    i can recommend febi bilstein branded lock modules for vag cars, they have a improved microswitch for the doorlatch and are pre-greased
    i installed a crappy lock module for 50€ 3 months ago and it already failed: thinks driver door is always open so i cant lock the doors
    the module wasnt even put together correctly, like the melted plastic that was supposed to keep it together wasnt even attached on two of the points :D
    the febi modules cost 30€

    • @LarcsWorkshop
      @LarcsWorkshop 7 หลายเดือนก่อน

      Brilliant, thanks for sharing 👍

  • @latitudeash
    @latitudeash หลายเดือนก่อน +1

    My one started on driverside passenger door lock and over the space of 3 yrs I ended up replacing all 4 locks. Now my Hach lock is not accepting the key but the electric is all locking and working. Just saying you will have to do the other 3 doors for sure in the next 5yrs...lol. Its a pain, but the gurage wants £300 per door to do... What a rip off.

  • @frednetherlands887
    @frednetherlands887 ปีที่แล้ว +1

    Happy Sunday!

    • @LarcsWorkshop
      @LarcsWorkshop ปีที่แล้ว

      Thanks Fred, happy Sunday to you too 👍

  • @AMVComputers
    @AMVComputers 6 หลายเดือนก่อน +1

    What a nightmare! I've managed to get the panel off, but could not get the door to open. And after wathing the rest of the video, this stuck door goes to a local garage, as I don't have a day or two to mess with it.

    • @LarcsWorkshop
      @LarcsWorkshop 6 หลายเดือนก่อน +2

      I'm sorry to hear that. I think I was lucky.

  • @neongod1918
    @neongod1918 4 หลายเดือนก่อน +1

    Hi Larcs, could I ask what type of silicon do you use to such repairs?

    • @LarcsWorkshop
      @LarcsWorkshop 4 หลายเดือนก่อน +1

      If you mean on the regulator panel to door seal, I just used a household clear silicon.

  • @intransition8548
    @intransition8548 ปีที่แล้ว +1

    I have a similar problem, two doors don’t lock when I activate the key lock button.

    • @LarcsWorkshop
      @LarcsWorkshop ปีที่แล้ว +1

      Good luck sorting it out 🤞

  • @mattroberts6484
    @mattroberts6484 ปีที่แล้ว +1

    I've had both my front door central locking modules replaced (by mechanic friends) now my rear drivers one is starting to play up...where did you get the new module from and how much?

    • @LarcsWorkshop
      @LarcsWorkshop ปีที่แล้ว +1

      Hi Matt, I got it from eBay for about £22. I'll try and put a link to the listing below 👇🤞.
      Cheers Larcs 👍
      www.ebay.co.uk/itm/171395738575?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=wJiZ5q5jTRy&sssrc=2349624&ssuid=ZdXvL3CGQRW&var=&widget_ver=artemis&media=COPY

    • @mattroberts6484
      @mattroberts6484 11 หลายเดือนก่อน

      Thanks..today my rear drivers door lock has totally stopped working..was working everyother click so wasn't too bad..but today not opening at all..i doubt i could do it myself looks far too complex..help!!

    • @mattroberts6484
      @mattroberts6484 11 หลายเดือนก่อน

      I had new clutch kit fitted this weekend plus new timing belts tensioners pulleys aux belt water pump..loadsa money..timing belt kit was last done 5 years ago..they didnt look too bad tbh..look like they could of done another year atleast

    • @mattroberts6484
      @mattroberts6484 11 หลายเดือนก่อน

      Ive ordered a rear drivers door lock module from your link..just need someone to fit it when it arrives as its far to complex for me

  • @ziedjbali1242
    @ziedjbali1242 7 หลายเดือนก่อน

    Please need help.. my doors and my windows wont open unless i remove the cable of battery..
    Than a few minute go the problem will go again nothing work
    Golf mk4 tdi

    • @LarcsWorkshop
      @LarcsWorkshop 7 หลายเดือนก่อน +1

      That's very weird, I don't know what that is, sorry.

  • @campbellmorrison8540
    @campbellmorrison8540 5 หลายเดือนก่อน +1

    Im wondering what that plastic blade screw on the side ( and appears to be directly accessible via the hole in the door ) does? its not an unlock is it? One can see why this costs a fortune to get done at a garage.

    • @LarcsWorkshop
      @LarcsWorkshop 5 หลายเดือนก่อน

      I think that must be the child lock. Yes it can be very time consuming to get open.

    • @campbellmorrison8540
      @campbellmorrison8540 5 หลายเดือนก่อน

      Yes you are right, Ive just checked mine@@LarcsWorkshop

  • @flamurzhitia7007
    @flamurzhitia7007 2 หลายเดือนก่อน +1

    Guten Tag,wie kann ich die schine einstellen weil meine glass geht schief hoch,danke für eine Antwort

    • @LarcsWorkshop
      @LarcsWorkshop 2 หลายเดือนก่อน

      There isn't really a lot of adjustment. Just where the glass meets the window regulator. Maybe try lubricating the guides?

  • @mohamedabdallah2198
    @mohamedabdallah2198 7 หลายเดือนก่อน +1

    I did the same as you did and put a screwdriver in and then the plastic broke. Is there a solution perhaps??

    • @LarcsWorkshop
      @LarcsWorkshop 7 หลายเดือนก่อน

      I just kept fiddling until it went.

  • @Animal_Daryl
    @Animal_Daryl 3 หลายเดือนก่อน +1

    Hi, I have had to do the same on my wife's car but in the process, the spindle and wire for the window came off and now I have no idea how it goes back on, any suggestions?

    • @LarcsWorkshop
      @LarcsWorkshop 3 หลายเดือนก่อน

      Sorry, not sure what you mean. If the cable has come off the drum, all you can do is try to wind it all back on.

    • @flamurzhitia7007
      @flamurzhitia7007 2 หลายเดือนก่อน +1

      Si e keni montuar Gjamin né shina,ktu kam problemin,sdi pse nuk ngritet lart por vetem deri né gjysm ose pak lart me veshtersi,ju Falemnderit per ni pergjegjie.

    • @LarcsWorkshop
      @LarcsWorkshop 2 หลายเดือนก่อน

      @@flamurzhitia7007 . Sometimes the guides on the rails that move the window up and down break causing problems. The cables also sometimes times get twisted up and damaged in the pulley, this can cause issues.

  • @livinglifeboosted1642
    @livinglifeboosted1642 4 หลายเดือนก่อน +1

    I have the same car and the same door has just done the same thing it seems to be a common issue on these cars

    • @LarcsWorkshop
      @LarcsWorkshop 4 หลายเดือนก่อน

      Yes it does.

  • @cyberbros5621
    @cyberbros5621 ปีที่แล้ว +1

    Common problem with vw had same problem

    • @LarcsWorkshop
      @LarcsWorkshop ปีที่แล้ว

      Yes, it does seem that way.

  • @teamdrivealot8441
    @teamdrivealot8441 10 หลายเดือนก่อน +1

    Whaat tool did you use att that tiny acces hole ? Im losing my mind 😢

    • @LarcsWorkshop
      @LarcsWorkshop 10 หลายเดือนก่อน

      I think it was just a screwdriver IIRC. I was very lucky.

    • @teamdrivealot8441
      @teamdrivealot8441 10 หลายเดือนก่อน +1

      @@LarcsWorkshop ok it worked thanks 😄

    • @LarcsWorkshop
      @LarcsWorkshop 10 หลายเดือนก่อน

      @@teamdrivealot8441 glad you got it sorted 👍

  • @billgako5267
    @billgako5267 8 หลายเดือนก่อน +1

    on my car the problem is in the electronic placket on the window motor......

    • @LarcsWorkshop
      @LarcsWorkshop 8 หลายเดือนก่อน

      Do you mean the switch?

  • @billgako5267
    @billgako5267 ปีที่แล้ว +2

    OCTAVIA....same problem at 390,000 km.....

  • @tonystack1622
    @tonystack1622 6 หลายเดือนก่อน +1

    Why not just take off the door skin after ypu get the door open to change the lock mech ?

    • @LarcsWorkshop
      @LarcsWorkshop 6 หลายเดือนก่อน

      The door skins on the MK4 are welded/folded/bonded IIRC so not really an option?

  • @the1nonlysyndle102
    @the1nonlysyndle102 ปีที่แล้ว +1

    What's the lock name

    • @LarcsWorkshop
      @LarcsWorkshop ปีที่แล้ว

      Search for 'VW GOLF MK4 REAR RIGHT DOOR LOCK CENTRAL ACTUATOR MECHANISM DRIVERS SIDE' on Ebay.

    • @inflationistransitory
      @inflationistransitory 4 หลายเดือนก่อน

      James

  • @smithleerichard
    @smithleerichard ปีที่แล้ว +2

    More patience than me…..I’d have cut the door off

    • @LarcsWorkshop
      @LarcsWorkshop ปีที่แล้ว

      😂 I wasn't far off it Rich🤣

  • @vinhvic
    @vinhvic 10 หลายเดือนก่อน +1

    Le plus important n’as pas était enregistré dommage 😅

    • @LarcsWorkshop
      @LarcsWorkshop 10 หลายเดือนก่อน

      Yes, I couldn't have the camera running for all that time.