I want to thank you as much as possible since I tried this on my 407 and it worked...you just saved me 100$,and the mechanic wouldn't have known the solution.. Much respect and salute to you from Jordan
Thanks a lot, this did the trick for me on my 2004 407! Pulled the connector and reattached it, blower turned on right away. Will have to see how long it will last, otherwise I will put on new connectors.
Bonjour, je vous remercie pour cette vidéo, ça fait au moins 1an que j'ai des galères avec ma ventilation de chauffage, ça marche une semaine, ça s'arrête puis repart pour une semaine voir plusieurs mois et s'arrête encore. Fini les galères et merci infiniment. 👍👍👍
What the fxxx I’m looking at? That’s the fxxxing sentence which comes to my mind when I’m first looking at this clip.. my ac blower was stop working when I’m at shopping mall.. anyhow I just follow what you did, and guess what? Eventually it works! OMG thanks God.. it works and just took me few minutes to settle.. I doesn’t how it works, but it did! This is the first clip I’ve gone trough and it works.. Thanks bro for sharing.. Appreciated.
I thought to myself "there is no way this is going to work." But fuck me, it worked. Two lessons learnt. Always look on TH-cam. Never buy a french car.
bonjour moi j ai même problème mon ventilateur des fois tourne et des fois plus de soufflerie je teste ta solution demain et te tiens courant de la suite
I have the 2003 station wagon, and I didnt see the wire. the heater motor works, while connected directly to the car battery. tried to connect a testlamp to the heatermotor connector, and heard a clicking noise. probably the relay? checked the brushes aswell, they dont need to be changed. Its getting cold and I cant drive without the heater due to condensation.
My contact has melted the plastic. It works if I pull them apart and back together. But only for a short while. Then I have to do same thing again. What can I do, the cable are really hot and that’s why the contact melted. What can be wrong?
Hi. i need help! im about to replace the resistor for the fan but can´t find it? it´s supposed to be on the passengers side behind the glovecompartment but it´s not? Anyone with instructions or a manual for a peugeot 407 SW 2007?? PLS HELP.
Hi. My AC blows cool air for 1 or 2 seconds at and interval of 6 times before stopping every time i start my car. At times, when im lucky, the AC starts right away but most of the times it doesnt. The connector is pretty secured and it did no help with my AC even after disconnecting and connecting it. Do you seem to know the issue?
@@TheHenrymedrano Okay, but how can I get to the blower motor. Do I have to disamble the glove compartment. I will offer 50 dollar for a decent instructions.
@@Apstls834 Yes, it was an easy job. On which side is you stearing wheel located? Oh, sorry, this question was not necessary. Wait I'm from the Netherlands and I will translate my solution, hold on...for 10 minutes
Bro thanks but its just the wire pin connector readjustment. But mine the aircond did blow out an air but the cooling stage only start after 5 minutes driving.
if the gas is enough u should get 30psi low side & 200psi high side..gas is ok & the condenser fan speed is ok but u don't get the proper reading try to accelerate 3000rpm..then check the reading..if the low side is above 30psi ur compressor solinoid is having internal leak..change the compressor or find the same solinoid..clean also the expansion valve with wd40...to diagnose condenser fan without peugeot planet just over charge the gas then check if its getting high speed b4 it cut off...check also ur heater plap if its broken or stock up....
Sean Muruges i have no idea in right hand drive.my best suggestion is follow the wiring harness start from the blower motor because the other end of that connector is the blower motor.
I can't see the white connector even though after i opened this area. Can someone help me how to find for it? I can send the photo of this part through email..thanks
I has 2008 peugeot 407 Its happened with me Blower not work I did your method and the blower work again but the problem the air its not cold Can you tell me what i have to do next Thank
I want to thank you as much as possible since I tried this on my 407 and it worked...you just saved me 100$,and the mechanic wouldn't have known the solution.. Much respect and salute to you from Jordan
It took me about 30 seconds to fix the blower following your video. Thanks for the info!
Worked like a charm on Citroen c5 2009. Man you deserve nobel prize. thank you alottttttt. best regards
Thanks a lot, this did the trick for me on my 2004 407! Pulled the connector and reattached it, blower turned on right away. Will have to see how long it will last, otherwise I will put on new connectors.
Thank you! Had this problem and fixed it with some contact spray after watching your video.
Bonjour, je vous remercie pour cette vidéo, ça fait au moins 1an que j'ai des galères avec ma ventilation de chauffage, ça marche une semaine, ça s'arrête puis repart pour une semaine voir plusieurs mois et s'arrête encore.
Fini les galères et merci infiniment.
👍👍👍
What the fxxx I’m looking at? That’s the fxxxing sentence which comes to my mind when I’m first looking at this clip.. my ac blower was stop working when I’m at shopping mall.. anyhow I just follow what you did, and guess what? Eventually it works! OMG thanks God.. it works and just took me few minutes to settle.. I doesn’t how it works, but it did! This is the first clip I’ve gone trough and it works.. Thanks bro for sharing.. Appreciated.
Super ! Merci beaucoup, c'était un problème récurent et même les garagistes ne trouvaient pas. Bravo et encore Merci !!!
François Brière can't help u.please translate in english..
again god bless you same problem same solution👍🏻👍🏻👍🏻👍🏻
thank you, i had the same damn stupid problem and able to fix it because of your video
It is working, really thank you 👍👍👍
I thought to myself "there is no way this is going to work."
But fuck me, it worked.
Two lessons learnt.
Always look on TH-cam.
Never buy a french car.
Just been told I need to change heater motor £220+vat watch your video and guess what it was it lol
Thank you so so much, It worked!!!!
Thank you very much. It solved the problem
I recommend to change with more higher resistance connector. that would be fixed permanently. Pls subscribed and share 🙏🙂thanks 👍😊
You legend just saved me a fortune
Henry thancks a lot you a beast!
my blower has just stopped on my 508 could it be the same problem and where would i find it
Too awesome 👏🏼
Love u!
thanks for the tip. my car had the same problem
Than you man! In 30 sec you saved my money 💰
Onde fica a resistência sofagem deste modelo? Já procurei e não encontro.
Thanks it worked a charm 👍😎
Hi.
Can you help me where is located the blower motor resistor p407 2.0hdi 2004?
Thanks
Yooooo! Are there two connectors? One on the passenger side and driver side?
Just one at left hand side
It works tnx but what is the jack name i want to replace its little burned. Tnx
excellent, I made it the fan went
МУЖИК ТЫ ГДЕ...??? ДЛЯ ТЕБЯ ПОДАРОК 🎁 ВЫРУЧИЛ. СПАСИБО !!!
I try this and worked thnks
Thank you
Mine worked
What kind of higher conncector is it, sir??..i have a similar problem with my 407...thank you
The connector is low ampere weak. DIY household connector can do the job, or cut and solder directly
Same problem and didnt help...I found some moisture near connectors, can that be the problem? Blower works for five seconds and just shut down...
Thank you so so so much 😊
bonjour moi j ai même problème mon ventilateur des fois tourne et des fois plus de soufflerie je teste ta solution demain et te tiens courant de la suite
Thanks a lot 🙏
I have the 2003 station wagon, and I didnt see the wire. the heater motor works, while connected directly to the car battery. tried to connect a testlamp to the heatermotor connector, and heard a clicking noise. probably the relay? checked the brushes aswell, they dont need to be changed.
Its getting cold and I cant drive without the heater due to condensation.
darkwing2k3 check the heater flap maybe broken
Hi, I have the same problem with my 307cc, Hope someone can give advice on where I can find that connector on a 307cc. Thank you.
My contact has melted the plastic. It works if I pull them apart and back together. But only for a short while. Then I have to do same thing again. What can I do, the cable are really hot and that’s why the contact melted. What can be wrong?
Jesper Lundin poor contact makes the connection getting hot.cut and change both connectors with bigger and high amperage.
God bless you
My cars blower working fine but after driving some miles no air sis coming from blower fan it's becoming noicy what could be the problem bro?
Different case..might be the blower motor bushing is worn out..or maybe the pollen filter is clogged or blower motor blade is full of dust.
Hi. i need help! im about to replace the resistor for the fan but can´t find it? it´s supposed to be on the passengers side behind the glovecompartment but it´s not?
Anyone with instructions or a manual for a peugeot 407 SW 2007?? PLS HELP.
How did you get on with fix
Thanks bro
Thanks man!
Hi. My AC blows cool air for 1 or 2 seconds at and interval of 6 times before stopping every time i start my car. At times, when im lucky, the AC starts right away but most of the times it doesnt. The connector is pretty secured and it did no help with my AC even after disconnecting and connecting it. Do you seem to know the issue?
Change the connector with higher resistance or connect with soldering iron
Por que ni sale aire frio, se pararo volvio a funcionar y ya no echo aire frio, parece que no arranca el compresor
What if the blower works but it’s just heating not cooling
Any suggestions mate?
First check ac gas pressure. If its gas ok then could be the blower flap problem.stuck in heater position
thank you
cara obrigado pela dica top de mais
My problem solved 407 2007
I have a peugeot 2008 with the same problem.
I don't have a clou where I can find the resistor.
Plz help.
Near the blower motor
@@TheHenrymedrano Okay, but how can I get to the blower motor. Do I have to disamble the glove compartment. I will offer 50 dollar for a decent instructions.
Did you find something? I ve the same problem in my 2008..
@@Apstls834 Yes, it was an easy job. On which side is you stearing wheel located? Oh, sorry, this question was not necessary.
Wait I'm from the Netherlands and I will translate my solution, hold on...for 10 minutes
@@HansjeVdTillaert left side
Many many thanks
Thanks :-)
Bro thanks but its just the wire pin connector readjustment. But mine the aircond did blow out an air but the cooling stage only start after 5 minutes driving.
check ur gas pressure maybe less or over charge.
Henry Medrano I also checked the Aircond gas but was ok with the pressure. Thanks.
how many psi is the reading in low & high side?
Henry Medrano according to the Aircond Shop its within the requirement and I did not asked whats the PSI.
if the gas is enough u should get 30psi low side & 200psi high side..gas is ok & the condenser fan speed is ok but u don't get the proper reading try to accelerate 3000rpm..then check the reading..if the low side is above 30psi ur compressor solinoid is having internal leak..change the compressor or find the same solinoid..clean also the expansion valve with wd40...to diagnose condenser fan without peugeot planet just over charge the gas then check if its getting high speed b4 it cut off...check also ur heater plap if its broken or stock up....
Quick question can I by pass it?
You can change the connectors with higher amperage or you can connect directly without the connectors
if someone could help me, i could not find the wiring for the heater as it was in the video, My peugeot is 407 model 2005
Marwan Shublaq behind the cover near accelerator pedal
Hi Henry What if it is a right hand drive?
Sean Muruges i have no idea in right hand drive.my best suggestion is follow the wiring harness start from the blower motor because the other end of that connector is the blower motor.
Same position as in the video, left hand footwell.
I dont see the connector I have a right hand drive
My passenger side vent not blowing
Could be broken flap or control switch
I can't see the white connector even though after i opened this area. Can someone help me how to find for it? I can send the photo of this part through email..thanks
Stephanie LaiYen henrmdrn@gmail.com
Henry Medrano I just sent you the photo through email
Stephanie LaiYen there's no any attachment in your email..that white connector is the original parts and location of blower motor wire connector.
I just checked the email, the message wasn't delivered because the email address you gave me couldn't be found
henrymdrn@gmail.com
I has 2008 peugeot 407
Its happened with me
Blower not work
I did your method and the blower work again but the problem the air its not cold
Can you tell me what i have to do next
Thank
hook a gauge. check compressor reading. reading ok. possible broken heater flap mechanism. its common problem 407
Danke Danke
Hi...come help me over here in PUCHONG
Not working in my car. Must be something else.
Peugeot 407
Just been told I need to change heater motor £220+vat watch your video and guess what it was it lol