This is the real deal. I have 3 launch x431 dongles. One running a note 4 and 2 others on samsung tablets. I have a repair shop and had issues with programming a honda ecm and saw an earlier video by george melinik and ordered the x431. And worked great in a few minutes. Thanks for the video.
I need help….. so I have a 2002 jeep liberty limited edition and my engine blew up, so I replaced it with new one supposedly “it had the same vin number” but it was newer year, the computer was acting weird so they told me to I needed to program the old computer to new engine, and car went on theft mode… what should I do?
This tool is handy. I used it to recalibrate the weight sensor on the passenger seat for the SRS system because I had a “Passenger Air Bag Off Light” and “Side Air Bag” Off. This fixed it. SRS system works as indicated by the owner’s manual.
thank you for that video. well done. i have a honda crossroad that i cut key, programmed remote and clonned the chip. all works well except for the cloned transponder is not recognised ny the vehicle. please shine some light to my problem
Hi, the link that you have listed is for the full a scanner that’s a 1000$. I have a 2016 mdx and when I put in a used pcm the ignition would not turn on. In that case how do you program the used tcm. Thanks
Will this program work with honda smart key fobs? Also, is there a subscription required and how long is the software usable? I am debating buying a standalone pad to do key programming at work, because I don't like waiting in line for our shop tools just to program keys or smart key fobs. Thanks for any help...
Don't know why people would not believe. It's just a android platform with Launch x431 installed. Going to order one of these and compare with my Launch pads and otherwise various hardware
Hi, I have 2008 Honda Civic hybrid and all lights are on. Just today Honda dealership said that they can’t diagnose the error and can’t help. Car was going without any errors for years until this happened yesterday. No parts available and I almost got killed when the car staled at a intersection. What app and odbc tool I need to purchase to fix this issue with a old computer. Thanks in advance.
I think you might have saved me from junking my car. So I have a 2007 Honda accord if I replace my original ecu with a used one can I rewrite it and program my original immobilizer to it ?
hi george i have a problem and is in need of help with it i order a launch X-431 in my diagonitic program got deleted how can i restore or redownload the program back
George, thank you for taking the time to show the world how to rewrite the VIN. Where does one, such as myself, purchase that blutooth connection tool? I would very much like to have one just like that one you are using. I used the link that you posted to amazon and it does not have the item. What is it called, maybe I can find it elsewhere. Thanks in advance for your assistance.
People can say wat ever they want but I be live this guy because of him I went ahead and purchase one and it work just as he said thanks for all the great tips and the video
can you post the link if you have one?........these things seem to be kinda hard to find...and i want to make shore i get the right thing....because some are called x431 idaig and others are called x431 diagun....are these the same?
Not sharing the name of the application and how to get it . I couldn’t even find this connector you are talking about anywhere. This is just a misleading software
Well dudes said he would post the link again since this isn't working and he doesn't reply to any comments about where to get it only replys to other comments so way to make a video that has no pauses so you could what show ppl that you really used a device that you can't tell anyone where to get it or post a link um yeah ok winning 👍🏿
This is the real deal. I have 3 launch x431 dongles. One running a note 4 and 2 others on samsung tablets. I have a repair shop and had issues with programming a honda ecm and saw an earlier video by george melinik and ordered the x431. And worked great in a few minutes. Thanks for the video.
Sergio Hernande
where did you get yours?....
Do i need bluetooth?
where do you buy this?
George I do not see this module on Amazon. Is there a model number you can provide?
I want to update the software on my 2007 honda pilot. How do I do this using this method
The link for the 10 is not longer good. Can you please update it
10:26 Awesome job really appreciate it. Be blessed 😊😊
I need help….. so I have a 2002 jeep liberty limited edition and my engine blew up, so I replaced it with new one supposedly “it had the same vin number” but it was newer year, the computer was acting weird so they told me to I needed to program the old computer to new engine, and car went on theft mode… what should I do?
Like the content......u didn't leave anything out and it was very good video to learn from
Fantastic video, I found this so helpful, thankyou.
I drive a 2006 8 gen honda civic and recently the ECM got bad... how do I get a matching ECM as the ones I buy starts but doesn't fire the vehicle
Hi,I am from Nigeria,I want to learn how to program ECU on old car from 2009 down wards
This tool is handy. I used it to recalibrate the weight sensor on the passenger seat for the SRS system because I had a “Passenger Air Bag Off Light” and “Side Air Bag” Off. This fixed it. SRS system works as indicated by the owner’s manual.
From where to buy the same one in the video. George's Amazon link doesn't work!! Thanks
thank you for that video. well done. i have a honda crossroad that i cut key, programmed remote and clonned the chip. all works well except for the cloned transponder is not recognised ny the vehicle. please shine some light to my problem
can you remap the O2 sensor thresholds with that?
Can i get the link for the scanner or obd conecter
What was the name of the app?
I change my computer, but the car not start. I want program the computer, but I want to know if that normally (don’t start)
Will this work on a 2015 honda pilot touring 4x4
Hi, the link that you have listed is for the full a scanner that’s a 1000$. I have a 2016 mdx and when I put in a used pcm the ignition would not turn on. In that case how do you program the used tcm. Thanks
Somebody tell me what kind program is that in the phone?
Will this program work with honda smart key fobs? Also, is there a subscription required and how long is the software usable? I am debating buying a standalone pad to do key programming at work, because I don't like waiting in line for our shop tools just to program keys or smart key fobs. Thanks for any help...
Hi. Can I still purchase that scanner?
Don't know why people would not believe. It's just a android platform with Launch x431 installed. Going to order one of these and compare with my Launch pads and otherwise various hardware
Excellent that was very informative thank you
Absolutely right I've been doing it with lunch scanner and Ms 908 prog
just gotz me a 431. i need to calibrate transfercase module on a 2007 tahoe. is there a video on procedure to do such a thing with a launcgh?
Hi, I have 2008 Honda Civic hybrid and all lights are on. Just today Honda dealership said that they can’t diagnose the error and can’t help. Car was going without any errors for years until this happened yesterday. No parts available and I almost got killed when the car staled at a intersection. What app and odbc tool I need to purchase to fix this issue with a old computer. Thanks in advance.
I think you might have saved me from junking my car. So I have a 2007 Honda accord if I replace my original ecu with a used one can I rewrite it and program my original immobilizer to it ?
Hey did you up trying this? did it work?
Thank you so much my friend George your,video is very helpful
Do you have to take to a dealer to re-write the mileage or does the mileage save in the cluster and transfer over with the new ECM? Please answer
x431 scan launch tool in amazon . where else can I buy this tools ? thank you.
So what is the name of the program? Looks super cool
Hey thanks for the videos what app are you using and what tool you using am replacing honda odyssey computer?
hi george i have a problem and is in need of help with it i order a launch X-431 in my diagonitic program got deleted how can i restore or redownload the program back
Your second Amazon link no longer works? Which model is the Bluetooth dongle you were using?
Whats the program your using?
do I need to program a brand new ecu ?
George, thank you for taking the time to show the world how to rewrite the VIN. Where does one, such as myself, purchase that blutooth connection tool? I would very much like to have one just like that one you are using. I used the link that you posted to amazon and it does not have the item. What is it called, maybe I can find it elsewhere. Thanks in advance for your assistance.
So where do you go to get that app?
Hi George. That dongle u used in this video,is it Thinkdiag? Pliz update me.
Hi George, whats the cost of the all car makes if i buy the launch.
awesome thanks. how can i get this device
Hello, I have a question for you. How to download this program?
What is the Hardware and software program you are using to do the ECM programing? The link is not working for me Thanks!
i need that done too a Hyundai Sonata 2006 . Can you do it if I send you the computer and vin
Where do you go to order the plug
what is the name of the program or software on your phone used to do the ECM swap. Is it X431 odb 2. Where can I download the software?
Can this be used for pcm update?
Thanks
I can only find x431 devices (tablets, etc.) online. Do you know where to get just the dongle so I can use my own phone?
That’s what I’d like to know. I really need it right now
What is a cheap and good scanner like yours that erases crash data?
What app for the phone???
2000 honda accord can I use that program
This video is very helpful.
Where i find this obd and obd app.
Thank you mr Melnick from Carlos in California
What is the app you are using??
Hello good morning mr gorge am in Nigeria please how can I get the Bluetooth connector how much is it
You Are So Right Ty
Can the x431 be used to troubleshoot EVAP leaks by forcing solenoids open and closed. Thanks for the great video!
Yes it can.
@@melniksmotorswhat is the name of the app
People can say wat ever they want but I be live this guy because of him I went ahead and purchase one and it work just as he said thanks for all the great tips and the video
Where did you find the scanner?
@@pimpedout1620 I got it online just look up the band he use u can find many different ones u just have to choose wat u want
What app did you use?
Does your old computer still work? If so, what's the point of programming another one?
Hello Good morning would like to find out what the app. Is you are using on your Phone??
Where do I get this product
link not working
What is the link for obd2 and app
Cannot find the device you used on Amazon
Good job 👍
I need the scanner tool how much
Can you guys tell me what to buy coz I have 2. 431x but not bluetooth.
If you have one then just update it you do not have to buy new one unless u want one to keep it inside ur glove box
I need your help for my vin ecm
For my 2012 si coupe please help brother in the name of our father God❤
The app doesn’t work for newer versions androids
GEORGE, will this scanner re calibrate my electric power steering
It should never had to re calibrate one
sir eska softwere kiya h please names softwere
awasome thanks
How can I get this app??
Hi is it possible that if I buy one I can get it in Zimbabwe...?
Yes just pay extra shipping and handling. Lol
How can I put this on my Samsung phone
I want to buy this .
Where do you get dongles and software?
Amazon i will post a link in few hrs
can you post the link if you have one?........these things seem to be kinda hard to find...and i want to make shore i get the right thing....because some are called x431 idaig and others are called x431 diagun....are these the same?
4 years later....
Name of the app?
Was this ever answered
Changing the ecu with the battery on 😢 scary stuff
Let's add a link to Amazon and I get exercise equipment
If possible what is the name of it thank you Mr.George
Not sharing the name of the application and how to get it . I couldn’t even find this connector you are talking about anywhere. This is just a misleading software
Thanks
I believe u
Spending 500 dollars for the software. One would need to do this several times to pay for itself.
Well dudes said he would post the link again since this isn't working and he doesn't reply to any comments about where to get it only replys to other comments so way to make a video that has no pauses so you could what show ppl that you really used a device that you can't tell anyone where to get it or post a link um yeah ok winning 👍🏿
He probably did it in the first vid just making excuses.
This is witchcraft
Buy now for $250??? Shit
I did see no 1m lol but it's ok
Pincho wero loko
How much is the x431 software dt will be sent to interested person. Pls i need ur email address.
I drive a 2006 8 gen honda civic and recently the ECM got bad... how do I get a matching ECM as the ones I buy starts but doesn't fire the vehicle
thanks.