sure, you can use any radio. the cheapest option would be to use a 2 channel radio. you just need to connect all motor wires to the esc. however, you cant control the axles individually.
@@Unboxingexperience7 Cheers mate. What i meant to ask was can i use all these functions on a cheaper radio like a flysky gt5 or g7p. What radio feature do i need to accomplish this? Thanks mate🙂
3CH will work if you are able to mix the 2 channels for the 2 ESCs on the trigger of your radio. If not, just use 1 ESC for all 4 motors and 2 channels of your radio.
at least spare parts are cheap 😂 I hope to get more feedback on the design and materials. I did some outdoor testing. motor hubs will fail if not printed the right orientation. pla is prone to heat deformation and UV. I had a break at the rear axle, so I added supporting arcs from the axle to the motor hubs. motors hold up well, but maybe they need grease after some time. I will share all my experiences, hope the community does too!
To fix wheel scrub, maybe something like a behind the axle mount c-hub pivot closer to the wheel? Like the rear of the motor would swing. Cool rig, though. Great job.
This is just awesome! I used to compete in RC crawling years ago. We never had 3D printers or the ability to make something like this. I am absolutely going to build this. Thank you for sharing it all! Subscribed!
This would be a BLAST with an FPV camera on it!
nice... sell done
If you decide to sell them as full kits I am there! :)
👍
Where did you get the motors from and where can i get them in England?
got it from aliexpress. you ll find the bom with links on thingiverse and printables
Can this be done using a different radio? Sonething a little more budget?
sure, you can use any radio. the cheapest option would be to use a 2 channel radio. you just need to connect all motor wires to the esc. however, you cant control the axles individually.
@@Unboxingexperience7 Cheers mate. What i meant to ask was can i use all these functions on a cheaper radio like a flysky gt5 or g7p. What radio feature do i need to accomplish this? Thanks mate🙂
programmable 3Ch radios should be capable of individual axle control. search the internet for moa (motor on axle) programming on your desired radio.
@@Unboxingexperience7 Cheers 🙂
Can I use a 3ch transmitter with this design?
3CH will work if you are able to mix the 2 channels for the 2 ESCs on the trigger of your radio. If not, just use 1 ESC for all 4 motors and 2 channels of your radio.
@@Unboxingexperience7 Ok great. Yes I think I can mix channels. Thank you for sharing this. Very impressive
Nicely done. Nice printer setup too!
Why 99% infill not 100%?
Thanks! I use gyroid infill pattern which is limited to 99%. There are other patterns allowing for 100% infill
Very Nice! Can't wait to print and build
LooKing firward to outdoor test
It would be good to get some long term durability tests on that in some real world conditions. Nice idea though I worry about the steering scrub.
at least spare parts are cheap 😂 I hope to get more feedback on the design and materials. I did some outdoor testing. motor hubs will fail if not printed the right orientation. pla is prone to heat deformation and UV. I had a break at the rear axle, so I added supporting arcs from the axle to the motor hubs. motors hold up well, but maybe they need grease after some time. I will share all my experiences, hope the community does too!
To fix wheel scrub, maybe something like a behind the axle mount c-hub pivot closer to the wheel? Like the rear of the motor would swing. Cool rig, though. Great job.
This is just awesome! I used to compete in RC crawling years ago. We never had 3D printers or the ability to make something like this.
I am absolutely going to build this. Thank you for sharing it all!
Subscribed!