ATO Load Cell Junction Box can have 2~10 or more load cell inlets, so it can realize the weight superimposed output measured by multiple sensors. Buy it online: www.ato.com/lo...
Anything in how to connect wires that describe the colors, like sig+ what color wire go whit. I'm just trying to reconnect the main wire coming from the screen on OP-916 (optima) Thank you.
Hello, I have a very technical question. Knowing how to read the load change exc+ and exc- values of 300-350 ohms one by one, but do I need to read these ohm values between 300 and exc- so that you can share this load access? 350 ohms again? How many ohms should I read these values at the Output Terminal?
Sorry, this may require our professional technicians to answer your questions. If you are interested in our products, you can click the link below the video. You can also ask pre-sales technical questions through our email.
It can only connect to sensors of the same type and specifications. If you want to weigh a 4000kg weight, we recommend that you use 4 independent sensors with a range of 4000kg. This is to prevent overload caused by uneven stress on a single sensor.
Great video, man
How to calobrate them individually?? Means if it shows difference on both loadcell individually
Very thankful information
Anything in how to connect wires that describe the colors, like sig+ what color wire go whit.
I'm just trying to reconnect the main wire coming from the screen on OP-916 (optima)
Thank you.
Im form Pakistan ❤
Nice video ❤
Hello, I have a very technical question. Knowing how to read the load change exc+ and exc- values of 300-350 ohms one by one, but do I need to read these ohm values between 300 and exc- so that you can share this load access? 350 ohms again? How many ohms should I read these values at the Output Terminal?
Sorry, this may require our professional technicians to answer your questions. If you are interested in our products, you can click the link below the video. You can also ask pre-sales technical questions through our email.
In junction box , Excitation is a series connectivity?in junction box. ,signal series connectivity?
Does it work with a S-type loadcell (hanging loadcell) ? And If I connect 4 load cells (1000kg), can I measure up to 4000kg?
It can only connect to sensors of the same type and specifications. If you want to weigh a 4000kg weight, we recommend that you use 4 independent sensors with a range of 4000kg. This is to prevent overload caused by uneven stress on a single sensor.
My indicator is showing error 5
In junction box , is signal connection in series connection?
The signal of the sensor is connected independently.
How could I connect the load cells I parallel without a junction box?
jaksanbox Adjustment of weight
If I have two 1000kg load cell can I weight 1500kg?
Yes, as long as the weight of their two points does not exceed the rated value, it is OK.
How can i buy this set..
buy it, www.ato.com/load-cell-junction-box
Sir Loadcell display kha se buy kre, kis nam se.
Do you need it? www.ato.com/5-digit-display-controller-for-pressure-sensor