PS it’s always good to do 2 dry hits after cleaning just to be sure it’s dry and nothing is left over especially when deep cleaning and cleaning the cap (heat the EMPTY dyna till it click and instead of inhaling exhale and blow into it. Usually the smoke that comes out is water vapor )
Use a scraper to get most of the oil out of the condenser and reuse your alcohol cleaning fluid. I then add the oil to my AVB jar and when I have 14g i use it with the alcohol to make RSO tablets. I get 4 tablets from 14g. They're very very strong lol.
I am loving this company and my journey through the DynaVerse! I am also very happy to see a company that I am truly enjoying moving forward and making new videos as well as introducing new products! Good on DynaVap!!! I already had the VonG(i) and the Omni's but I'm really interested in trying the new stainless steel tip for the "M" plus. The fact that it's a little bigger than my titanium tips is interesting as well. It seems like the Vong, Omni and M make the grand trio. And in the end I'm getting the new "M" because it seems to be fairly polarizing among the DynaVap fans. They seem to love it or hate it. That was enough to make me want to try it and find out for myself! Sometimes a really long soak in some water with Dawn dish soap will do the trick. For the super tough gunk I will use the Iso/Salt combination. It never fails but it can damage. Be careful.
I don't mix the outside stem with the condenser and the tip, they are usually very dirty with resin and that will make it a lot dirtier than it was. I also take the screen out of the tip with the help of the condenser (it will not fit if it has too much resin, so do it after the first "cleaning shakes" with the isopropyl alcohol)
I like to stir my dyna's parts (aside from the cap and o-rings) in warm oat milk, then scrub the parts with a soapy pipe cleaner for the thorough clean, then drink the milk
I'm (pretty😅) sure soaking the medical grade stainless steel in 99% ISO is safe... but what about the O-Rings? Aside from any leeching, wouldn't they dry up and crack over time?
These videos seem helpful but.... The FAQ on the Dynavap says do NOT use isopropyl alcohol for cleaning. On various "expert" how-tos it states to remove o-rings before cleaning because alcohol can damage them, and other authorities says the o-rings are not reactive to isopropyl alcohol and go ahead an soak them....this video leave them in place. ...help.
I think, that‘s why they lubricated them o-rings after cleaning. But is it vaseline or some oil? They just want to sell it but i really want to know what exactly typ of fat they choose. Or is it on mineral basis? Whole thing stainless steel and then bit of silicon or mineral oil
I was wondering about that too. I heard in another video that isopropanol isn't great for the o-rings. Maybe that's what the replacement parts they're selling are meant for? 😅
I like how specific yet general you were when it came to speaking about things and specific. Instead of saying q-tips you said cotton swabs. I like that attention to not have any copyright infringement. Very nice! I can't say that I removed my tip. O-rings since breaking some during removal, but if you have a handy way for moving them maybe I will
Can't we just remove the o-rings, cap and then simmer remaining parts in a milk so the fat inside the milk dissolves the residues? That residue is still consumable you know, using IPA to dissolve and then discard seems like a waste. Also, calcium and vitamin D, B etc.
My issue with isopropyl alcohol is that it doesn't do a good job or removing the stain from excessive usage. That's why I use this stuff called Grand Master Smoke. You let your stuff soak in that, you'll think it's a new piece.
its better to reassemble by putting the tip in first and lightly pressing the condenser into place. not flush, half of O ring slightly protruding. putting condenser in first like this will give less air flow.
PS it’s always good to do 2 dry hits after cleaning just to be sure it’s dry and nothing is left over especially when deep cleaning and cleaning the cap (heat the EMPTY dyna till it click and instead of inhaling exhale and blow into it. Usually the smoke that comes out is water vapor )
Use a scraper to get most of the oil out of the condenser and reuse your alcohol cleaning fluid. I then add the oil to my AVB jar and when I have 14g i use it with the alcohol to make RSO tablets. I get 4 tablets from 14g. They're very very strong lol.
Probably gonna have a lot of cbn in that rso unless you're vaping it perfectly every single time
@@Skarlet_Overdrive What part of "very very strong" did you not understand?
I am loving this company and my journey through the DynaVerse! I am also very happy to see a company that I am truly enjoying moving forward and making new videos as well as introducing new products! Good on DynaVap!!! I already had the VonG(i) and the Omni's but I'm really interested in trying the new stainless steel tip for the "M" plus. The fact that it's a little bigger than my titanium tips is interesting as well. It seems like the Vong, Omni and M make the grand trio. And in the end I'm getting the new "M" because it seems to be fairly polarizing among the DynaVap fans. They seem to love it or hate it. That was enough to make me want to try it and find out for myself! Sometimes a really long soak in some water with Dawn dish soap will do the trick. For the super tough gunk I will use the Iso/Salt combination. It never fails but it can damage. Be careful.
I don't mix the outside stem with the condenser and the tip, they are usually very dirty with resin and that will make it a lot dirtier than it was.
I also take the screen out of the tip with the help of the condenser (it will not fit if it has too much resin, so do it after the first "cleaning shakes" with the isopropyl alcohol)
What a nice guy off camera! A wrapped gift right to the face:D
I like to stir my dyna's parts (aside from the cap and o-rings) in warm oat milk, then scrub the parts with a soapy pipe cleaner for the thorough clean, then drink the milk
“Him officer”👆
In your older video how to clean yhe cap, you recommend to soak it, in this you say dont soak the cap ?? Which is it 😅
Thank you kindly mate 😊
@@josheee6123 what did they answer you? i cant see the comment
@@quetepasaclarin11 I can't see it either now mate. Personally I found the best way just use an alcohol swab and clean inside then dry thoroughly
how do you make the cap and tip shiny again? I tried vinegar, i tried iso, didn‘t do much :(
have you found an answer?
I'm (pretty😅) sure soaking the medical grade stainless steel in 99% ISO is safe... but what about the O-Rings? Aside from any leeching, wouldn't they dry up and crack over time?
These videos seem helpful but.... The FAQ on the Dynavap says do NOT use isopropyl alcohol for cleaning.
On various "expert" how-tos it states to remove o-rings before cleaning because alcohol can damage them, and other authorities says the o-rings are not reactive to isopropyl alcohol and go ahead an soak them....this video leave them in place.
...help.
I think, that‘s why they lubricated them o-rings after cleaning.
But is it vaseline or some oil?
They just want to sell it but i really want to know what exactly typ of fat they choose. Or is it on mineral basis?
Whole thing stainless steel and then bit of silicon or mineral oil
@@Syckxpack I think is literally pure vaseline
ChatGPT means, vaseline would be toxic and recommends silicone grease
@@Syckxpack That's good to know, thanks hahahaha
@@cluver99vaseline is white, that thing is yellowy
Is there a reason you aren't supposed to soak the cap in cleaning solution?
It affects the click disks if residue gets stuck inside
Just combusted today in the m+ .... Good timing
I have the omni I always take the orings off can I leave them on for a quick soak?
А разве спирт не разъедает резиновые детали?😮
i lol'd at "the square port" as opposed to "the air port" haha. I may be a lil too medicated....but i think the isopropyl is bad for silicone....?
So how do you clean the active cap. Mine is blacker than africa
lmao, a good question. Funny as hell too.
cuales es la solucion para limpiar, alchol, agua, jabon y agua? no pienso comprar eso me parece incecesario
So no need to remove silicon parts then?
I was wondering about that too. I heard in another video that isopropanol isn't great for the o-rings. Maybe that's what the replacement parts they're selling are meant for? 😅
I like how specific yet general you were when it came to speaking about things and specific. Instead of saying q-tips you said cotton swabs. I like that attention to not have any copyright infringement. Very nice! I can't say that I removed my tip. O-rings since breaking some during removal, but if you have a handy way for moving them maybe I will
Fajna fiolka do czyszczenia wapka 🥰😮
My cap barley makes a noise on the first click. How can I make it louder, bigger?
it's not supposed to click loudly. the second click is what you are aiming for.
How i clean the VonG i?
Can't we just remove the o-rings, cap and then simmer remaining parts in a milk so the fat inside the milk dissolves the residues? That residue is still consumable you know, using IPA to dissolve and then discard seems like a waste. Also, calcium and vitamin D, B etc.
Bio ethanol OK? I think it's OK.
i thought you shouldn´t soak the o-rings in alcohol ?
The O-rings are made out of viton which is solvent safe.
thank you josh
🙏🏻 thx❤
Good luck and consider to everyone. 💚
Cotton swab and alcohol spray is enough for me.
🤠👍👍👍👍👍
music is wayyy too loud
know your audience
no it's not.
My issue with isopropyl alcohol is that it doesn't do a good job or removing the stain from excessive usage. That's why I use this stuff called Grand Master Smoke. You let your stuff soak in that, you'll think it's a new piece.
I just cleaned my 2018 as above. I like to run the tube under hot water and let it sit longer. Majic eraser helps as well. 😁
its better to reassemble by putting the tip in first and lightly pressing the condenser into place. not flush, half of O ring slightly protruding. putting condenser in first like this will give less air flow.