Thank you so much for posting this video.. we just got this filter last summer for our 125 gallon tank and it’s not been cleaned this whole time so thank you for giving me hope I can do it lol
Ms Muddy Toes thanks for checking it out👍🏻 I’m glad it helped you. I usually clean my filters out once every 2-3 months. Really seems to help with nitrates
Hi, Very recently I bought Sunsun HW 304-B canister filter. I found the UV light is not working continuously and always blinking from the beginning. Is this normal or it has to lighting continuously without blinking.
Nice...id advise puting poly fill on the top tray also what I have done is use bio rings on the bottom of the canister base it' collects aload of waste works perfect 🤙
Cichlidscape • it works perfect it's cheaper going to Primark geting a pillow 2pound it cost but can't have any chemicals in it ya need the ones the arent fire resistance
poly fill should be on the lower tray above a sponge. Rings or bio balls go at the top as the last thing the water passes. A bit of gravel right at the bottom is a good idea, it helps break up any larger matter that enters the filter. hmm hmm. Glad we cleared that one up.
Electric Water no never put polyfill on top it should only be on bottom rack if poly fill is on top of bio media it will make it easier to clog the media which is obviously not a good thing to do
Damn, thanks for the quick reply! I think I'm gonna pick up the one right below this for my 40 gallon breeder planted aquarium, the 303b. UV sterilization seems preferable to medication for keeping pathogens out of the water.
varanidguy no problem👍🏻 it would work perfectly for that. I don't run the uv 24/7 but for one day in the week. Apparently you can have issues with melting trays if you do
Yessir, I've been watching videos and reading forums, found that out. I knew going into it that running it 24/7 is unnecessary anyway and prematurely burns out the bulb...good to know that more importantly it can cause damage.
I didn't like this filter. It has leak two times randomly at night. It was good that I notice it right away. Also, the water pump became weak after 4-5 months. I do regular cleaning and all but still didn't function properly. Also, beware of handling, the connectors are made of very weak plastic.
Never throw out filter media for anyone watching this, it contains plenty of beneficial bacteria, just rinse in tank water and reuse until it's totally falling apart.
Power Head with the bio media and the course sponges I have enough bio filtration in the filter. You wouldn’t want to keep the polyfil and rinse it as clogs so easily. Better to get a fresh patch👍🏻 but you are right, always rinse media out with tank water....as I did👍🏻
Thanks a lot! You made it really easy to do
Thank you so much for posting this video.. we just got this filter last summer for our 125 gallon tank and it’s not been cleaned this whole time so thank you for giving me hope I can do it lol
Ms Muddy Toes thanks for checking it out👍🏻 I’m glad it helped you. I usually clean my filters out once every 2-3 months. Really seems to help with nitrates
Do you where i can get a , impeller cap, Door, mine bróke in the center, i am in need of one ?
@@predatoryfishkeeping did you ever get the parts?
@@-a-cb-l9000 no , one ever replied and i searched for it and could not find it ):
@@predatoryfishkeeping ali baba sells the parts. You have to pay the international fees though. Not to bad.
So the "quick connector" where the hoses attach to the filter also stops the water from draining down the hoses when you open it?
correct
Shouldn't yhe pollyfill be the last thing the water hits before going back into the tank?
Very very nice video. I can watch videos like these all day it's fun and your fish look great wow
Deon 0026 thanks, much appreciated buddy
Hi, Very recently I bought Sunsun HW 304-B canister filter. I found the UV light is not working continuously and always blinking from the beginning.
Is this normal or it has to lighting continuously without blinking.
Cool video I just did one on the same filters. Nice tank and fish. It is crazy how much debris get in there.
Thomas Medina oh yeah! They definitely do there job. & for the prices you really can't beat them in my experience
can we throw all water inside of canister or use same water?
Is the filter still running?
Hii actually after cleaning and when i set it up. There is air leakage can you pls tell how to fix this
Hi garina, probably just a little air that the filter hasn’t purged yet. Just tilt it a little all four ways and that should help👍🏻
Hi,for 300 galons..how many sun sun canister, u recommend?
Get 2 fx6
I can’t remember where but someone recommended a few bio rings or pebbles in the bottom of the canister but I don’t recall why. Ideas?
Think the idea there is that the larger balls or ceramic rings will catch larger debris before it gets to clog the coarse, medium and fine sponge
When you put anything at the bottom, of the canister, it has to fit just right or you will never get it closed.
Sir this filter good one filter a 4 feet 18 tall 18 trench tank to
Nice...id advise puting poly fill on the top tray also what I have done is use bio rings on the bottom of the canister base it' collects aload of waste works perfect 🤙
electric water ok ok I'll look into it. The polyfil is mad! Haha literally had the bag over a year now & it cost me 7 bucks. Mad👌🏻
Cichlidscape • it works perfect it's cheaper going to Primark geting a pillow 2pound it cost but can't have any chemicals in it ya need the ones the arent fire resistance
electric water over here they do big bags at Walmart for 7 bucks, all safe. Such a money saver
poly fill should be on the lower tray above a sponge. Rings or bio balls go at the top as the last thing the water passes. A bit of gravel right at the bottom is a good idea, it helps break up any larger matter that enters the filter. hmm hmm. Glad we cleared that one up.
Electric Water no never put polyfill on top it should only be on bottom rack if poly fill is on top of bio media it will make it easier to clog the media which is obviously not a good thing to do
What about the UVB?
Nice info
Nice
kyle stpierre thanks👍🏻
How long have you had this filter for?
varanidguy probably about a year now. Still going strong👍🏻 thanks for watching!
Damn, thanks for the quick reply! I think I'm gonna pick up the one right below this for my 40 gallon breeder planted aquarium, the 303b. UV sterilization seems preferable to medication for keeping pathogens out of the water.
varanidguy no problem👍🏻 it would work perfectly for that. I don't run the uv 24/7 but for one day in the week. Apparently you can have issues with melting trays if you do
Yessir, I've been watching videos and reading forums, found that out. I knew going into it that running it 24/7 is unnecessary anyway and prematurely burns out the bulb...good to know that more importantly it can cause damage.
Do you think a 304 b is enough for a 75 gallon tank?
I didn't like this filter. It has leak two times randomly at night. It was good that I notice it right away. Also, the water pump became weak after 4-5 months. I do regular cleaning and all but still didn't function properly. Also, beware of handling, the connectors are made of very weak plastic.
Does the uv melt the plastic trays?
D cichlid lover I don't run the uv 24/7. Usually only for 1 day in the week as that should kill all free floating algae. No melting as of yet👍🏻
Cichlidscape • thanks because I was worried abt that amazing channel I have sub
D cichlid lover yeah just run it 1 day a week & you should be good👍🏻 no issues with mine yet, & ive had it about a year! Can't beat it for the price
Check out Pondguru on how to pimp that filter. He’s one of your own Countrymen!
Chris S I’ll give it a look! Thanks for watching mate👍🏻
Byron Simpson 😂😂😂 bio home is meant to be good, but I don’t think I’ll be doing that haha
75 Britiske galloner ore 75 Amerikanske galloner ???
Never throw out filter media for anyone watching this, it contains plenty of beneficial bacteria, just rinse in tank water and reuse until it's totally falling apart.
Power Head with the bio media and the course sponges I have enough bio filtration in the filter. You wouldn’t want to keep the polyfil and rinse it as clogs so easily. Better to get a fresh patch👍🏻 but you are right, always rinse media out with tank water....as I did👍🏻