The cleaning is always the most time consuming part, but what a joy to see a finished piece. I was disappointed to see you quench it though, so dangerous, you could have lost the whole piece quenching silver like that.
Beautiful.. but very labor intensive! I’ve made this technique, using silver & copper Metal Clay; much easier for this technique. Thanks for showing; I definitely appreciate learning where this technique originated!!!
Interesting as you let your steel tongs go into the acid instead of using copper ones, and you have copper on the inside of the ring rather than silver. Using silver would avoid sweat reacting with the copper and contaminating skin
Great job, like it very much. my question: how long do you heat the MG parts with gas torch, and what kind of gas torch. I tried several times, but my flame is to cold.
Thank you Propane gas and wind pressure. Enclose the area tightly to prevent heat from escaping. There is no choice but to confirm with your eyes that the metal melts You have to learn the timing by doing it dozens or hundreds of times. it will be a very difficult task
The cleaning is always the most time consuming part, but what a joy to see a finished piece. I was disappointed to see you quench it though, so dangerous, you could have lost the whole piece quenching silver like that.
Thank you for your advice.
Beautiful.. but very labor intensive! I’ve made this technique, using silver & copper Metal Clay; much easier for this technique. Thanks for showing; I definitely appreciate learning where this technique originated!!!
Thank you
I'll continue to do my best
Great work!!
Thank you! It's a fun job!
所々色合いが違ってみえて、いい感じですね‼️
ありがとうございます。他にも色々な模様を出してみたいですね。
I like the subtle pattern personally
thank you
Великолепно. Спасибо. Случайно нашёл ваш канал. Если не секрет, вы откуда? Где, так хорошо работают и создают красоту?🤝👍
Interesting as you let your steel tongs go into the acid instead of using copper ones, and you have copper on the inside of the ring rather than silver. Using silver would avoid sweat reacting with the copper and contaminating skin
Thank you
I will use it as a reference
bravo
Thank you
Great job, like it very much. my question: how long do you heat the MG parts with gas torch, and what kind of gas torch. I tried several times, but my flame is to cold.
Thank you
Propane gas and wind pressure.
Enclose the area tightly to prevent heat from escaping.
There is no choice but to confirm with your eyes that the metal melts
You have to learn the timing by doing it dozens or hundreds of times.
it will be a very difficult task
Thank you very much
Hi there, can you please tell me what is the word mokume gane means? cause we all are calling it in Japanese so I just wanna know what is that means?
Pattern like an annual ring of a tree
Hi.
What kind of acid to use?
I mainly use dilute sulfuric acid.
質問させていただきたいのですが、8:28で使用している制作した材料をある程度丸く成形している工具の名前を教えていただきたいです。よろしくお願いします。
視聴していただきありがとうございます
工具の名前ですがこれっと言って名前があるわけではないんですよね
強いて言えば指輪整形プライヤーですかね
@@Handmade_Man 教えて頂きありがとうございます。木目金作りに挑戦してみたいので、またたくさん動画を見させて頂いて勉強させて頂きます。
Hi, what kind of gas you are using for the torch?
Propane gas and wind (compressor)
何回か挑戦しましたが、板を挟んでなましてくっついたのに叩くと剥がれるんです・・・
ご視聴ありがとうございます。
そうなんですよね、ちゃんと結合されていないと剥がれてしまうのです。
こればかりは、何百、何千とくっつく瞬間を目で見て感覚で覚えるしかないです。
くっつく瞬間は金属の結合部分がキラッと光るタイミングがあるのです。
あとは、火を当てる前に金属の油分などをちゃんと取り除く、板を平らにして
隙間をなくすことです。
@@Handmade_Man 平らに伸ばして酸洗い水洗いし手袋着用してるんですが。
伝統技法と言われるだけあって経験ですね！ まだ数回で心折れてたらあきませんね。
もう少しだけ挑戦します！！
脱脂もお忘れなく。
本当難しいですが、トライしてみてください。
私もまだまだの身ですが。
Отлично! Подскажите пожалуйста температуру и длительность нагрева при спайке пластин, спасибо!
The temperature, time, etc. are intuitive things that I try many times.
❤️
🇺🇸
+
🇯🇵
=
🤝
Exactly
Thank you
Top
Moku texture is not strong enough... :( But still a nice ring.
thank you
Mokume Gane is quite difficult.
@@Handmade_Man はい！ 非常に難しい!!
Please don’t inhale the acid damp .
Thank you, I'll be careful
しぶい、、
ありがとうございます。
Ву
？