Step by step demo on how I recovered pure gold from military grade Can gold plating be removed? How do you recover gold from scrapping a computer? How much gold is in gold plated jewelry? How do you process gold with nitric acid?
Just a heads up! You should have been able to get all the base metals with nitric, once your absolutely sure the base metals are gone, then go with gold flakes in a fresh beaker and aqua regia, also when your done with these reactions increase your water volume,,, putting urea, and sodium metabisulfite into a small volume of liquid like that can and will lock up your metals. Looking at the beaker you have I would put enough water in to fill half of the beaker but remember, always add acid to water, so fill another beaker to half way and then pour and spray down the acid into that beaker, then neutralize with urea, and then SMB, one more thing don't be shy with your borax, if and when done right it will crack of like glass it will not combine with your gold, silver, platinum etc.....................good luck!!!!!!!!!!!!! PS, If you find the gold has a silvery look to it it, s because a lot of the older boards way back were plated with mixed metals like platinum, and unless you do your gold cold first, and then after retrieving your gold what will be left in your beaker most likely at that point will be platinum go after that by using some heat to get it to dissolve, there are fancier ways of doing it, but this will work for you until you really get going and reading others posts you will figure it out
Great presentation my friend, I hope to start Gold extraction soon, I have a nice stockpile of IC chips, and circuit boards. Thank you For sharing your knowledge.
Only one mother board with many fine gold plated pins, thats ok, very good, in my country, I search some times gold electronic scrap in industrial wastes, but are poor material because is end the old computers, in this time the computers has less gold plated, less gold chips, and micro procces or CPU's, well I hope have more material jijiji, is very interesting your video, regards friend !!!!!
I have one of those boards from an IBM system34 and now I am going to order some acids to do a video like this..2,500 for nitric ACid and 500 for hydrochloric acid,,
I appreciate your description of your process. That must have been a very old board? I have not seen one like that for more than 45 years! Just for interest sake, what did the board come up from?
I've found some industrial boards recently I've never seen in any of my research. Identical to what he has here.... And this video is the only one I've seen a replication. My stuff is from an old railway scrap, and the electrical components and boards are from the switch boxes and controllers.
It’s kind of bs to not put half the info about what ur doing such as ....was that salt u sprinkled into the burning mix? What temperatures did u use to smelt with?
Step by step demo on how I recovered pure gold from military grade
Can gold plating be removed?
How do you recover gold from scrapping a computer?
How much gold is in gold plated jewelry?
How do you process gold with nitric acid?
Alright good my bro
Hello sir
I have lots of mobile plats please tell me how can I gold recovery
What's the expected yield from computer scraps?
℅nitic acid
Like! Отличное видео! Я тоже собираю радиодетали содержащие золото!
Just
a heads up! You should have been able to get all the base metals with
nitric, once your absolutely sure the base metals are gone, then go
with gold flakes in a fresh beaker and aqua regia, also when your
done with these reactions increase your water volume,,, putting urea,
and sodium metabisulfite into a small volume of liquid like that can
and will lock up your metals. Looking at the beaker you have I would
put enough water in to fill half of the beaker but remember, always
add acid to water, so fill another beaker to half way and then pour
and spray down the acid into that beaker, then neutralize with urea,
and then SMB, one more thing don't be shy with your borax, if and
when done right it will crack of like glass it will not combine with
your gold, silver, platinum etc.....................good
luck!!!!!!!!!!!!! PS, If you find the gold has a silvery look to it
it, s because a lot of the older boards way back were plated with
mixed metals like platinum, and unless you do your gold cold first,
and then after retrieving your gold what will be left in your beaker
most likely at that point will be platinum go after that by using
some heat to get it to dissolve, there are fancier ways of doing it,
but this will work for you until you really get going and reading
others posts you will figure it out
You post this like he don't already know what he is doing... which, obviously, he does know
Great presentation my friend, I hope to start Gold extraction soon, I have a nice stockpile of IC chips, and circuit boards. Thank you For sharing your knowledge.
Shum i nderlikuar proqesi
Great work.. Thank you.
Only one mother board with many fine gold plated pins, thats ok, very good, in my country, I search some times gold electronic scrap in industrial wastes, but are poor material because is end the old computers, in this time the computers has less gold plated, less gold chips, and micro procces or CPU's, well I hope have more material jijiji, is very interesting your video, regards friend !!!!!
Great presentation, needs some step by step guidelines about simple methods
I have one of those boards from an IBM system34 and now I am going to order some acids to do a video like this..2,500 for nitric ACid and 500 for hydrochloric acid,,
If I may, i would like to kindly ask, where in the heck did you get that beautiful piece of scrap? also, inside of satelite dishes....
fantastic video Tim from Australia A1
what was that you had a pinch of something before melting..??
Thank you very much.-A greeting
can you tell me how you aquired all the circuit boards also can you do a complete board in acid from start to finish without removing any parts
What induction melter did you use and where did you get it?
I wish all the vids were like this. Shows everything real well. Nice vid my friend
Where you find that board?
Aapke pass h bord
Nice vídeo 👌
Thank You
the mesh you use to dry, what is it made of. is it plaster?
Where do you find gold pins like those? Modern electronics don't have those?
What is done with the excess liquid?
So com a água regia da para fazer este processo ?
super !
I appreciate your description of your process. That must have been a very old board? I have not seen one like that for more than 45 years! Just for interest sake, what did the board come up from?
I've found some industrial boards recently I've never seen in any of my research. Identical to what he has here.... And this video is the only one I've seen a replication. My stuff is from an old railway scrap, and the electrical components and boards are from the switch boxes and controllers.
Nice..
Sir you are great
Can we adding of some destiled water in aqua regia to avoid severity of the reaction? If yes, how much it?
Que tipo de placa e essa e de qual equipamento ?
What liquids are used in this extraction
which type of board this is
What are the gloves you have/ had on? Thin white gloves? A link to purchase
Is there a lower cost alternative to nitric acid?
0;25 what is the name of this material used?
It’s kind of bs to not put half the info about what ur doing such as ....was that salt u sprinkled into the burning mix? What temperatures did u use to smelt with?
where do you find these circuits ?
How much gold did that weigh all together?
What's the name this connecter Sercute
ใส่กรดอะไรครับผม
What is the model brand of this motherboard? can you help me?
What's the grade of acid u use?
I mean the percentage of concentration of acid.
What to do with solder of that bord
Sir can i use toilet cleaner (HCl) but it is not pure form
Vre nice
Very educational video, but you need a better translator.
What is the reason of heating it?
ชอบๆ
All that work and materials you used to get that tiny nugget your probably losing money
2500THB?
14 k is o 18 k thanks
How did you arrive at 98.2% pure?
Shum fitimprures por me duhet ne gjuhe shqipe
Oye chico cuanto se obtiene en oro de una tarjeta madre de pines ???
Giveaway !! Hahaha just kidding
Name of board?
Gold dust mengnet keeping how
How gold coins converted into bars
Can i use this method with (dvd r-w and floppy drive) plated pins, they are mix of iron and copper pins.
👍👍💓💝
What is the name of chemical who used plz not clear voice
So where is the bleach refine???
Hcl jenis apa yg di pake
தமிழில் மொழி பெய்ர்க முடியுமா நண்பரே kannan
I have 30 kg of scrap mobile phones how much i will get can someone tell,thanks.
It is real.i am a gold worker.9059393689.ap.india.
One gram per kilos
hi my friend. is that non iron pin or not.
whow many borders to get this gold. thanks
Copper plated gold. View from the chemical water is blue.
thank you my friend
Chemical.your.supli
what is this device pls
Are you a robot ?
What kind of bord you have shown in this video? Where we can found it?
I had many hard disk and boards any body please help me to recover gold
Your crucible is filthy. For precious metals use a clean one.
Gold added iron remove aqua regia
Aqua regia other methods acid
I,am interested
Your gold salution
Ma e oro
😡😡😡
The fuck is this board from?????
What’s done with the excess liquids??