@AAPrintSupplyCo Subscribed and liked! Thank you! I have a question. I hear a sound like gears moving, or something moving periodically. I haven't used the printer. Only went as far as installing the inks and charging process. Is this periodic sound coming from the printer normal?
@@thehappyazshop520 great question: this IS normal. The machine has such a minimal maintenance schedule for the user thanks to internal automations such as circulations/cleanings. The machine being able to perform these on it's own as needed eliminates the need for regular attention from the operator = less down time!
Great video! Very informative and easy to follow (along with the Assemble video). What should I do if I get see blue ink splatters under the cover after the ink charge?
Hey there! Honestly, it's not a fair fight putting an Epson printer against almost any other machine as far as maintenance is concerned. While all machines have their pros/cons one of the main selling points of this printer is the lowest amount of attention needed
@AAPrintSupplyCo Agreed. I'm leaning towards Epson because of the maintenance honestly. How's the maintenance on Epson F1070 compared to F2270 and Prestige series? Can I go on vacation for a month? lol... DTF Prestige A4/R2 would've been great if they were a bit more vacation friendly 😄
@@LoneBagels The Epson F1070 and F2270 will have the same maintenance schedule: shake the white inks before printing with no further daily attention and once a week clean the capping station (takes about 2 minutes). Here is a video I made on the daily maintenance for the Prestige line: th-cam.com/users/shortsRER4PKqPDE4?si=G_SsGV2POeeDBygU
@@LoneBagels aside from the daily outlined steps in the Prestige video, on an as needed basis, we will also want to clean the encoder strip of any ink overspray and apply grease to the rail for the printhead. This frequency will depend on usage and should be done at least once a month. Vacation prep can be done fairly quickly on the Prestige machines also!
I hope all is well on your end! I have a quick question. I ran our Epson 2270 Yesterday 🙌 but the shirts were and still are soaked. Am i missing something?
Hey there, hope all is well with you as well. If we are referring to the pretreat or ink they should be dried with a heat press. I like to run my press between 335 to 350 F and press at the following times (medium pressure): pretreat - 35 seconds CMYK ink only - 35 seconds CMYK + white ink - 1 minute What was your garment still wet with?
Hey there, for heat press this would be a great machine with the F2270: -aaprintsupplyco.com/products/prisma-auto-heat-press For pretreat machine, this would be top of the line in my opinion: -aaprintsupplyco.com/products/viper-maxx-dtg-pretreatment-machine Did you already get your printer? We can build out a package for you
hey, man, we are trying to set up the model f2200 epson and got stuck at the loading ink step, basically what is not clear is the label wh/cl, what does the cl stand for? do we need a different cl ink?
Hello, it sounds like you're almost there! The white ink slots can also be loaded with cleaning liquid packs (CL). These are also used for long term storage mode but for production you will install the white inks into those spots.
Hello there, the F2270 does NOT come with a cable to connect to the computer you will need a printer usb cable that will have the square printer plug one side
Thank you for the informative video! With your hekp we are in the process of set up! So exciting!!
So glad the video is helpful, be sure to subscribe for more. We have plans for this machine
@AAPrintSupplyCo Subscribed and liked! Thank you! I have a question. I hear a sound like gears moving, or something moving periodically. I haven't used the printer. Only went as far as installing the inks and charging process. Is this periodic sound coming from the printer normal?
@@thehappyazshop520 great question: this IS normal. The machine has such a minimal maintenance schedule for the user thanks to internal automations such as circulations/cleanings. The machine being able to perform these on it's own as needed eliminates the need for regular attention from the operator = less down time!
You're awesome! Thank you for your help!!!
Great video! Very informative and easy to follow (along with the Assemble video).
What should I do if I get see blue ink splatters under the cover after the ink charge?
Hello, are we referring to splatter on the actual flat top cover we open to access the charging unit?
This is awesome! I wonder why pro colored or a4 prestige don’t make it as low maintenance as epson.
Hey there! Honestly, it's not a fair fight putting an Epson printer against almost any other machine as far as maintenance is concerned. While all machines have their pros/cons one of the main selling points of this printer is the lowest amount of attention needed
@AAPrintSupplyCo Agreed. I'm leaning towards Epson because of the maintenance honestly. How's the maintenance on Epson F1070 compared to F2270 and Prestige series? Can I go on vacation for a month? lol... DTF Prestige A4/R2 would've been great if they were a bit more vacation friendly 😄
@@LoneBagels The Epson F1070 and F2270 will have the same maintenance schedule: shake the white inks before printing with no further daily attention and once a week clean the capping station (takes about 2 minutes). Here is a video I made on the daily maintenance for the Prestige line: th-cam.com/users/shortsRER4PKqPDE4?si=G_SsGV2POeeDBygU
@@LoneBagels aside from the daily outlined steps in the Prestige video, on an as needed basis, we will also want to clean the encoder strip of any ink overspray and apply grease to the rail for the printhead. This frequency will depend on usage and should be done at least once a month. Vacation prep can be done fairly quickly on the Prestige machines also!
I hope all is well on your end! I have a quick question. I ran our Epson 2270 Yesterday 🙌 but the shirts were and still are soaked. Am i missing something?
Hey there, hope all is well with you as well. If we are referring to the pretreat or ink they should be dried with a heat press. I like to run my press between 335 to 350 F and press at the following times (medium pressure):
pretreat - 35 seconds
CMYK ink only - 35 seconds
CMYK + white ink - 1 minute
What was your garment still wet with?
Love the video
Thank you for supporting, be sure to subscribe for more!
Could you tell me what’s the best press and shirt treatment apparatuses to pair with the f2270.
Hey there, for heat press this would be a great machine with the F2270:
-aaprintsupplyco.com/products/prisma-auto-heat-press
For pretreat machine, this would be top of the line in my opinion:
-aaprintsupplyco.com/products/viper-maxx-dtg-pretreatment-machine
Did you already get your printer? We can build out a package for you
hey, man, we are trying to set up the model f2200 epson and got stuck at the loading ink step, basically what is not clear is the label wh/cl, what does the cl stand for? do we need a different cl ink?
Hello, it sounds like you're almost there! The white ink slots can also be loaded with cleaning liquid packs (CL). These are also used for long term storage mode but for production you will install the white inks into those spots.
@@AAPrintSupplyCo so we need to get the cleaning liquid packs separately, right?
You should make a video of this using a mac because holy hell is was a nightmare to find help on using it.
Hey there! Sorry to hear that, what parts were you having difficulty with?
I don't seem to have a cable that connects the computer. Did it come with one? The port on the printer is not a USB
Hello there, the F2270 does NOT come with a cable to connect to the computer you will need a printer usb cable that will have the square printer plug one side
Does this unit require daily maintenance if your not using it often?
Not at all! There is a weekly maintenance on the schedule but if done weekly should only take a couple minutes
Ink cartridge price sir ?
Hello, here is the link to the different colors: aaprintsupplyco.com/products/epson-ultrachrome-dg2-ink-magenta-800-ml