I have watched multiple videos on how to use these jigs and yours is by far the best 👌. All of your methods shown lead to the most accurate joints with the least amount measuring, almost foolproof. Thanks for making it
I have this video saved...I was doing some dowel work today and went straight to this video for reference...absolutely priceless. Thanks again for taking the time to make this video - I'll have this saved for life :)
I have one of these jigs - with horrible instructions that don't go much further than moving the L shaped measuring bar. I didn't know you could do all of this with it. This has just saved me a lot of sweat and guesswork for a Sunday project!! Thank you!
Excellent video, no need for a commentary! Now I know what those moulded-in pegs are for - centering! Everyone with one of these style jigs should watch this video. Thankyou.
Thank you so much for taking the time to share This , I bought the kit a few years ago , but just did not know how to use the Jig Properly , You made this look super easy , have to get the Jig Out again and Try again
Thanks so simple and sorted out the problems I was having. I slightly sanded a dowel and coloured it red to use as the reference dowel as all mine were a very tight fit.
Bravo, bolji video i obrajšnjenje za korišćenje ovog alata do sada nisam video na ni jednom kanalu, svaka čast, nastavite i dalje ovako i redovno ću vas gledati i pratiti. Pozdrav!!!
Thx for sharing. I’ve been having the hardest time ever trying to figure out how to work this jig. You’ve made it so much easier for me to comprehend the concept. I’m definitely subscribing to your channel. You are definitely a miracle worker. Thx again. You are the best.
nice tutorial! but for connection 2 there is another faster way a slots in the vertical stop is made for this purpose starting from 4:25, you need to turn the tool with the handle up, and the vertical stop away from you. so that the dowel gets into the corresponding slot
Muchas gracias por tú video, es de gran ayuda tengo ese aparatito pero lo estaba usando mal. Ahora voy a practicar y ver si puede hacer un ensamble decente 😅
I have a question. I recently bought 10mm wood dowels but I dont undsrstand which wood brill bit to use to make a hole. I have 8mm and 10mm wood drill bit. 8mm hole for too small for 10mm dowel and 10mm hole was somewhat looks a bit loose for 10mm dowel.
Hi, I purchased one of these jigs when I saw your video, It came with three small pieces with points on one surface and the other end seems to fit inside the drill bit holes (3 different sizes) Could you please explain what these are for? They have me stumped, I thought maybe they were for scribing a line in the timber to show where the dowels could be fitted, but if that's the case, they'd always fall out and there's no way to anchor them in place. There's nothing worse than having parts for a Chinese gadget and there's no instructions :-) Thanks for your video.
No talking, just perfect. Thx for sharing.
I have watched multiple videos on how to use these jigs and yours is by far the best 👌. All of your methods shown lead to the most accurate joints with the least amount measuring, almost foolproof. Thanks for making it
One of the best tutorials in this topic ! ⭐⭐⭐⭐⭐
Thank you! A very clear and instructive tutorial on how to use all the features of a doweling jig. Priceless!
I have this video saved...I was doing some dowel work today and went straight to this video for reference...absolutely priceless. Thanks again for taking the time to make this video - I'll have this saved for life :)
no nonsense, expert video....exactly what I needed. Thank you very much!
someone give this guy some cash so he won't have to remove his single dowel every single time
he earned it, good tutorial
Great video shows exactly how to do dowels properly!
I have one of these jigs - with horrible instructions that don't go much further than moving the L shaped measuring bar. I didn't know you could do all of this with it. This has just saved me a lot of sweat and guesswork for a Sunday project!! Thank you!
And yes it works so well. One cabinet finished and one more to drill out tonight !
A picture worth a thousand words times a video. Thank you!
Excellent video, no need for a commentary! Now I know what those moulded-in pegs are for - centering! Everyone with one of these style jigs should watch this video. Thankyou.
KUDOS TO MARDAK WORKSHOP. A very instructive video content.!!!
Thank you my friend.. has taught me a slightly better way.. to use the Dowel jig here in the UK. Thank you 🙏
Спасибо! Всё понятно стало! Наконец я понял, как работает данное приспособление!
Thank you so much for taking the time to share This , I bought the kit a few years ago , but just did not know how to use the Jig Properly , You made this look super easy , have to get the Jig Out again and Try again
Howdy, Brother! Exactly what i was looking for. Thank you and Drive-On, Cowboy!! 🤠
Love this video , the best explanation and not a word said !! Amazing.
I made perfect joints following this .
Мужик сверлит, а я сижу перед экраном и дую (сдуваю опилки)😂
I agree, the best video I have found on the subject of a dowel jig, thank you sir!
Amazing, wonderful and very useful! Thanks!
Thanks so simple and sorted out the problems I was having. I slightly sanded a dowel and coloured it red to use as the reference dowel as all mine were a very tight fit.
Skvělý nápad 👍 Nerozumím proč, když dělá jinak vyborný tutoriál, je pokaždé tak obtížně vytahuje🤔🤔🤔
Thank you. That was an excellent demonstration of how to use a dowelling jig. I did not know all those techniques for aligning the holes.
Great video! Thank you for this explanation!!
so thats how the pegs are lined up, so easy once shown, thanks heaps.
thanks! great demonstration of how to use this jig.
Well done, Master, very good video, many thanks!
I've had this jig for 10 years, and the instructions never made much sense. Thanks for this video !
Молодец, все ясно и без слов... Профессионализм и мастерство -- общий мировой язык.....
Best video ever for this jig, thank you so much
@@michaelsaber8143 you're welcome thanks for watching
Very Good !! Congratulation 🇧🇷
Excelente video, saludos desde Perú.
Excelente herramienta 🔨✂️
Bravo, bolji video i obrajšnjenje za korišćenje ovog alata do sada nisam video na ni jednom kanalu, svaka čast, nastavite i dalje ovako i redovno ću vas gledati i pratiti. Pozdrav!!!
your video explains this really well. thanks
Perfect when there is no instructions in the box.
im watching it late..should have seen this yesterday.. but nvm... i learned a thing now and going to keep it inside for next project
I got a cam lock jig and didn’t wanna mess up but you made it easy and simple.
Thx for sharing. I’ve been having the hardest time ever trying to figure out how to work this jig. You’ve made it so much easier for me to comprehend the concept. I’m definitely subscribing to your channel. You are definitely a miracle worker. Thx again. You are the best.
Fantastic straight forward skills 👌
Thanks for Sharing the information on this jig!! I just received mine and your video was very helpful.
Great video and I really enjoyed the fact there’s no speech and a simple music loop, helps me zone out and focus...
Thanks for sharing your knowledge 🛠👍
Master Excellent .....
Brilliant video. Expertly explained. If only more TH-cam how to video were this straightforward. Thank you
What drugs are you on? There was no 'explanation'. At all. Thumbs down on this video too.
great video .. especially when these chinese jigs come in a packet with no instructions...thank you...
ممتاز يبو نور خوش فيديو
توني اجرب هالجهاز
حبيبي ابوجاسم ❤️❤️👍🏻👍🏻👍🏻
Thank you for sharing your skills and tips
you’re welcome thanks for watching ❤️❤️
guarde este video como un invaluable auxiliar de mi taller, gracias mil por compartirlo,saludos. desde atotonilco estado de hidalgo,en Mexico.
obrigado pela demonstração.
sou do Brasil
Super! Perfect!!
Pictures are worth a thousand words my friend, thanks for showing how it's done...subbed
exelente muy bien explicado gracias
Thank you so much for this video!
I wish I can do it like you you are the best thank you
thanks bro ❤️❤️❤️❤️
Very helpful video thanks! from Philippines.
Good instructional video. Thanks.
Excellent teaching video. Pacing is perfect. Just the right amount of detail. I thank you.
Excellent video. Thanks very much. Makes things MUCH clearer!
Thank you so much, now I know how to use it.
Really good ... thanks
nice video! just bought one last month!
Yes they are very handy if you know how to use them Thanks for your comment
Спасибо. Очень доступно и без лишних слов
nice tutorial! but for connection 2 there is another faster way
a slots in the vertical stop is made for this purpose
starting from 4:25, you need to turn the tool with the handle up, and the vertical stop away from you. so that the dowel gets into the corresponding slot
there are a lot of ideas and method to do that. Thanks for your comment.
Muchas gracias por tú video, es de gran ayuda tengo ese aparatito pero lo estaba usando mal. Ahora voy a practicar y ver si puede hacer un ensamble decente 😅
Igualmente me pasó a mí
Parabéns pela dica de uso, perfeito a melhor que já assisti.
good job bro...nice job you have...
Nice video!!!
Greetings from Brasil
thanks bro ❤️❤️❤️❤️
Thank you. You understand people,s brain did many positions.👍
Hello my friend,
This is a very good idea. And the need for the workshop. Congratulations. You created the dowel tool well. 'll see.
thanks you very much my friend ❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️🙏🙏🙏
Nuito bom vídeo, simples e objetivo. me ajudou muito. Deus abençõe você
Great video ,if I'm honest I tried my jig before watching and it fine my head in 😂I found it hard ... how about u guys
Great instruction but REALLY annoying music
I will work on that next video
That you for this
Найкраще відео по роботі з цим кондуктором.
Many thanks…I lost my manual…Ty
Many thanks
ممتاز مجيد شكراً جزيلاً على هالفيديو .
حبيبي ❤️❤️❤️👍🏻
Very good
Nice tutorial. Thanks so much.
ابداع ويعطيك العافية
👌Excelente 👌
Лучшая демонстрация, как пользоваться приспособлением, спасибо
Thank you!
Thank you so much
Thanks you
can you let me know who made the dowel jig you are using.
thanks, Ray
BHD 1.02 52％ Off | Quick Wood Doweling Jig ABS Plastic Handheld Pocket Hole Jig System 6/8/10mm Drill Bit Hole Puncher for Carpentry Dowel Joints
a.aliexpress.com/_mPGU63s
I have the same tool rwn and I do the same things. But it is crooked. What should I pay attention to, it could be the reason.
Thank you
Merci beaucoup.
Decent video but the music is so annoying
Very clear thanks. Please stop the music. Not necessary.
Just turn your sound of when you watch the video
Mardak, it's OK to talk, you know.
Muchas gracias
Thanks ❤❤❤❤
Thank you.
What brand is the jig?
What's the price for a general pro- doweling kit
I have a question. I recently bought 10mm wood dowels but I dont undsrstand which wood brill bit to use to make a hole. I have 8mm and 10mm wood drill bit. 8mm hole for too small for 10mm dowel and 10mm hole was somewhat looks a bit loose for 10mm dowel.
Tak potom něco není 10mm - buď vrták nebo kolíky. Jiná možnost není. 10mm je vždy 10mm ! 👍🤠
This video would be so much better if you'd tell the viewer what you are doing and why step by step
I have plan to talk in my future videos Thanks for your comments
Hi, I purchased one of these jigs when I saw your video, It came with three small pieces with points on one surface and the other end seems to fit inside the drill bit holes (3 different sizes) Could you please explain what these are for? They have me stumped, I thought maybe they were for scribing a line in the timber to show where the dowels could be fitted, but if that's the case, they'd always fall out and there's no way to anchor them in place. There's nothing worse than having parts for a Chinese gadget and there's no instructions :-) Thanks for your video.
Hi thanks for your comment can you contact me on Instagram and send me some photos of your jig @alnajar22269
What brand of jig is that? Do you have a link?
It’s China I order it from a Aliexpress