Thank you so much! I needed to add more RAM to a G500, and I couldn't find the screws. I thought they'll be hidden under the rubber feet - but that was not true.
I see you removed the screws from the hinges, but then how do you put the monitor back on? I've been trying for hours to reassemble my laptop and having no luck!
Hi, I have a G500 and its display has taken a hit, can i know where will i get a display for better price. I checked amazon and few other sites, their prices are high. Any refurbished will also do. Please help me out.
Thanks dude. I had to fix the hinges on my old laptop. Turned out that wasn't quite possible because plastic was literally in pieces and the whole thing was far too gone but at least i didn't make it any worse
@@sandeshms2148 well i loosened the hinges and oiled them up, then i glued the whole thing together with glass fibers and left it to dry. You gotta use pliers for the screws, lenovo is built in a way that makes hinges tighten up a tiny bit, every time that you open or close it. Be aware however that lubing the hinges too much may make them too weak to hold the screen, especially with the added weight of glue
My laptop fell a few months back now every time I close it the part near the fan cage lifts up and the corner were the rubber is it lifts up what can I do even the screen lifts up in the corner when I close it then I have to press down in the corner my fear is that it will break sometimes when I am busy on it would freeze
I had the same problem. At least one of the sockets of the 3 screws of the hinge will be broken. One of them is the silver one in the upper left corner, which you can see after removing the maintenance cover. The other two only after removing the top frame. I replaced the whole middle part, its very cheap at aliexpress, I only paid 8€.
what lenovo g500 is bluetooth capable? my laptop{ lenovo g500} is uncapable for use bluetooth so what i do? please reply me ....talk about bluetooth hardware..
My laptop lenovo G500 model Intel core i3 third genration processor, AMD 2gb graphics, So my laptop in power supply problem , then service center agent say motherbord replacent requirement . So give solution
Generally upgrading your hard drive to an SSD is the easiest and best thing the average person can do to give life to an old laptop. Depending on your use, adding more RAM could help, but if you're not using more than what you already have it's not going to do much. If you haven't cleaned your computer before, getting some canned air and trying to remove the dust inside can be helpful as well.
Hmm, OK, but I don't like the use of metal (screwdrivers) on plastic (keyboard). This inevitably leads to damage, even if only superficial or cosmetic - but the tiniest scratches and nicks are highly visible. Especially on something like a keyboard which you are looking at *all the time* :( Rather use spudgers and / or credit cards for this job.
stp j'avais allumé mon Lenovo et j'ai oublié de l'éteindre j'ai juste fermé sans l'éteindre et sa rallume pas sa affiche juste LENOVO que pu-je faire aider moi stp
You could try to get into the BIOS (on lenovo it's pressin f2 or the backup button during boot). If you can get into the bios you could try to boot a live usb to check what went wrong. (I can read French, but my writing is horrible, hence the English reply :p )
For anyone who is gonna try this ,first know that your laptop won’t work again and you’ll have to buy a new one. please take it to a specialist ( a message from a person who tried this )
Thank you very much my friend. Thanks to you, I replaced the bottom case of the laptop. Your video was very useful. I didn't experience any problems.
my fan was broken, and my laptop kept overheating, fixed like 10 minutes ago because of this video, thanks dude!
I take apart laptops all the time, this is the first I've come across one with screws so well hidden, thanks for this vid
Thank you so much! I needed to add more RAM to a G500, and I couldn't find the screws. I thought they'll be hidden under the rubber feet - but that was not true.
For me too.. today it helped..
Thanks man. Very nice tutorial. I just replaced the middle frame. It took 2,5 hours but now everything is fine again. :)
Thank you, in my life I would never have guessed that there could be bolts there
Thank you so much, now I can type with a working keyboard❤
Great.. you made my day, i was getting weired to open it but your video made it so simple.... Thanks alot.
since there is an i5-3rd gen can you put an i7-3rd gen inside it or no? does it have the same chipset??
Thank you! Have a G500s and did not know I had to remove the keyboard to take it apart.
Thank you brother, i have replaced the body part . Now hinge problem is resolved.. thank you
مشكور ياباشا
بدي اسألك على افضل مبرمجه وافضل مكرو سكوب ولو تكرمت ترسلي الصور والموديل
Can you replace the top black plastic plate surrounding the keyboard once the keyboard is out or does that need the bottom components removing first?
Thank you very much
Very helpful video
What will be SSD caddy size required to install a SSD in place of DVD RW ?
Thanks a loot for the help 👍🏻
I got it! Now let's see who will put back together the pieces. :D
loooooooool
Just play the video in reverse :-}
I see you removed the screws from the hinges, but then how do you put the monitor back on? I've been trying for hours to reassemble my laptop and having no luck!
It would be great if you make a new video of lenovo g500 showing necessary steps to disassembly only the LCD screen
Hi, I have a G500 and its display has taken a hit, can i know where will i get a display for better price. I checked amazon and few other sites, their prices are high. Any refurbished will also do. Please help me out.
Hmm super work......
New G500 screen price
Thx man, great vid! Helped a lot! Keep it up, kudos 😁
Would be great video if there was narration, so we know which parts we are removing.
Thanks dude. I had to fix the hinges on my old laptop. Turned out that wasn't quite possible because plastic was literally in pieces and the whole thing was far too gone but at least i didn't make it any worse
Same here what to do ?
@@sandeshms2148 well i loosened the hinges and oiled them up, then i glued the whole thing together with glass fibers and left it to dry. You gotta use pliers for the screws, lenovo is built in a way that makes hinges tighten up a tiny bit, every time that you open or close it. Be aware however that lubing the hinges too much may make them too weak to hold the screen, especially with the added weight of glue
does it have a mini PCi full size connector for mSata drive?
My laptop fell a few months back now every time I close it the part near the fan cage lifts up and the corner were the rubber is it lifts up what can I do even the screen lifts up in the corner when I close it then I have to press down in the corner my fear is that it will break sometimes when I am busy on it would freeze
I had the same problem. At least one of the sockets of the 3 screws of the hinge will be broken. One of them is the silver one in the upper left corner, which you can see after removing the maintenance cover. The other two only after removing the top frame. I replaced the whole middle part, its very cheap at aliexpress, I only paid 8€.
Not going to lie,without this I'd have broken it.
are there a pci e slot? becuz i need an egpu for my laptop for heavy gaming.
No
Again there is a lenovo which the case is broken. I have g500 too, ı need to change lower case. ı don't dare..
Hi, i have a question: Can i run Lenovo G500 after disassembling LCD and upper housing (i mean a part connected with LCD screen). Thx for help.
Yeah why not.. but you'll need a hdmi cable and a monitor to make use of though.
Thank you for video 🙏🏻💐
what lenovo g500 is bluetooth capable? my laptop{ lenovo g500} is uncapable for use bluetooth so what i do? please reply me ....talk about bluetooth hardware..
Same in my device also, any update on it?
My laptop lenovo G500 model
Intel core i3 third genration processor,
AMD 2gb graphics,
So my laptop in power supply problem , then service center agent say motherbord replacent requirement . So give solution
Gracias por el video, ha sido de mucha utilidad.
um the screen?
my lenovo g500 processes really slow and freezes often please help it is not new
Generally upgrading your hard drive to an SSD is the easiest and best thing the average person can do to give life to an old laptop. Depending on your use, adding more RAM could help, but if you're not using more than what you already have it's not going to do much. If you haven't cleaned your computer before, getting some canned air and trying to remove the dust inside can be helpful as well.
Is there anyway i can contact you?
Hmm, OK, but I don't like the use of metal (screwdrivers) on plastic (keyboard). This inevitably leads to damage, even if only superficial or cosmetic - but the tiniest scratches and nicks are highly visible. Especially on something like a keyboard which you are looking at *all the time* :(
Rather use spudgers and / or credit cards for this job.
Thank you for this
Thanks dude, just replaced the lcd cable, shame that you didn't show how to open up the screen, nonetheless great video
שלום אשמח מאוד עם תעלה סירטון להרכבת מחשב נייד לנובו G500
stp j'avais allumé mon Lenovo et j'ai oublié de l'éteindre j'ai juste fermé sans l'éteindre et sa rallume pas sa affiche juste LENOVO que pu-je faire aider moi stp
You could try to get into the BIOS (on lenovo it's pressin f2 or the backup button during boot). If you can get into the bios you could try to boot a live usb to check what went wrong.
(I can read French, but my writing is horrible, hence the English reply :p )
Thanks.
Good
Super g
Thanks
Kudos !!
*Thx :)*
good
Thank you
שלום יש לי מחשב נייד שהפלסטיק שלו שבור ואני רוצה להחליף לפלסטיק חדש ויש לי את הכל אני צריך מישהוא שיודע להחליף לי את החלקים למחשב
salut j'ai besoin d votre profil facebook j'ai un problème avec mon lenovoG505
For anyone who is gonna try this ,first know that your laptop won’t work again and you’ll have to buy a new one. please take it to a specialist ( a message from a person who tried this )
謝謝分享