Woooo. That was amazing. This will help a lot when we have to make a plan either on a large scale or a small scale. Life is easier man. Thank you. Appreciate it. ❣
In the video, there is a dynamic block for double doors in CAD that lets you adjust the middle section. However, the CAD file downloaded from the membership section doesn't have the dynamic block feature in the middle.
Hi Adam. Do you have a video of just a normal double door with the stretch action where leaves, arcs etc. just adjust size of overall width and not the idividual leaves and arcs independently? I've tied doing it and the arcs just don't stretch at the same scale as the door leaves. My door leaves are at 90 degrees to the wall so a little different to yours.
@@AdamArchh I'v just inserted the new block created in a new file without changing the values and I tried to Regen after reopening but nothing happened
Hey, Ive been trying to recreate this following the instructions. The issue I am facing is that the arcs, for the door openings and the full width of the door are not moving in tandem. If i stretch the door, and then pull the right doot handle to adjust the size, the arcs are thrown off balance.
This is amazing, but just wanted to ask i followed the steps but for some reason my define attributes text isnt appearing on my block, did i miss a step or maybe its a setting issue?
Hi! I’m having a minor problem, everything is okay, except that if I adjust the total width of the double door the thickness of the door leaf/panel thickens. And it kinda displaced from the point of connection to the jamb. I hope you can help me. Unlike in this video, the door swing and the door panel is just a line.
By adding unnecessary nomenclature to the block you've only made this more complicated to understand. Can you please show a video that shows only the two folding leaves? Thanks
Woooo. That was amazing. This will help a lot when we have to make a plan either on a large scale or a small scale. Life is easier man. Thank you. Appreciate it. ❣
Thanks for your helpful videos ❤
World Best Architecture Computer tools Internet Teacher!! ^^b always thanks~
Wow, thanks!
Thanks for helping ❤
Thank you very much.
Thank Sir ,You are great .I can't find "Blockplaceholder>width",
In the video, there is a dynamic block for double doors in CAD that lets you adjust the middle section. However, the CAD file downloaded from the membership section doesn't have the dynamic block feature in the middle.
Is there a way to create a dynamic double door with a leaf that has a thickness? Similar to your single door dynamic block?
Hi Adam. Do you have a video of just a normal double door with the stretch action where leaves, arcs etc. just adjust size of overall width and not the idividual leaves and arcs independently? I've tied doing it and the arcs just don't stretch at the same scale as the door leaves.
My door leaves are at 90 degrees to the wall so a little different to yours.
Hi, can i see your block?
Insta: @AdamArchh
Thank you for the explanation. Can I get the block used in the video? Thanks in advance
Use the join button to download the block file
Thanks a lot
Hey Adam, your videos are really helpful. I wanted to join your channel but the join button is not showing up for me. How do I join?
Hi, Use this link, if you still can't see it, it means: it's not available in your country.
m.youtube.com/@AdamArchh/join
@@AdamArchh ahh I tried it but It's still not working. Guess It's not available in my country. Thank you for the reply though🤗
Hi Adam I have an issue...When I reopen the file the width values no longer appear and in the text box there are just four hashtag, thanks
Hi, when reopening the block, open the Width without changing it. Also run the Regen command after each change.
@@AdamArchh I'v just inserted the new block created in a new file without changing the values and I tried to Regen after reopening but nothing happened
Hey, Ive been trying to recreate this following the instructions. The issue I am facing is that the arcs, for the door openings and the full width of the door are not moving in tandem. If i stretch the door, and then pull the right doot handle to adjust the size, the arcs are thrown off balance.
Hi, first set the total width, then change the inner door dimensions. The reverse does not work. Because the rate of 0.5 is broken.
can we use stack (attri. text) on dynamic block?
You can
@@AdamArchh can you make 1 video.?
This is amazing, but just wanted to ask i followed the steps but for some reason my define attributes text isnt appearing on my block, did i miss a step or maybe its a setting issue?
Hi! I’m having a minor problem, everything is okay, except that if I adjust the total width of the double door the thickness of the door leaf/panel thickens. And it kinda displaced from the point of connection to the jamb. I hope you can help me. Unlike in this video, the door swing and the door panel is just a line.
How can i download this plugin??
There is no plugin. These are standard AutoCAD commands. You can use the join button to buy all the blocks we have created.
🎉
By adding unnecessary nomenclature to the block you've only made this more complicated to understand. Can you please show a video that shows only the two folding leaves? Thanks
Adam، is haghly skild and propashnal، i larn to much from has channal
Dumbest format I have ever seen