How to connect wire / speakers to 3.5mm jack
ฝัง
- เผยแพร่เมื่อ 27 ส.ค. 2024
- This is a description on How to wire a speaker to 3.5mm jack.
This should work perfectly , though it may be rather quiet , you can add an amplifier in between the headphone jack and speaker to make it louder, but I obviously didn't do it :)
![[Watch Party] RoV Pro League 2024 Winter | with Moowan ( Bacon Time Vs Talon )](http://i.ytimg.com/vi/CCEDhu6dPN8/mqdefault.jpg)
![[UNCUT] The Loyal Pin ปิ่นภักดิ์ EP.4 (4/4)](http://i.ytimg.com/vi/d3l5rxl5CVo/mqdefault.jpg)
Perfect!!. I can't believe I found this video. Had a hard time finding instructions to do exactly this. Very clear and precise instructions. You're the best!!! ❤
connected phone to audio jack from 2005-2012 and used tutorial to splice to large sony speaker... amazing audio quality when set to mono, even with my shoddy connection quality lol. 10/10
So basically- find a cord with a jack already on it, cut the wires and tape them to the speaker wires. There I just saved everyone 7 minutes and 40 seconds.
I saw all the thumbs down- but watched it anyway...and I realllly wanted to like the video- but damn near everything about it was wrong- the music, the length, you showed way too many unnecessary steps, AND you didn't even show the speaker working at the end.
Thank you
we don't all have soldering equipment. i'll take the quick fix.
I want my life back. Damn you dragged that out
This is pretty good but not necessary to separate the plastic strands from the wire because the type of wires you used in the demonstration are coated with enamel. To solve this problem and kill two birds in one stone all you need to use is a lighter. This will burn off the enamel coating on the wires as well as the plastic strands.
Manuel Ruen or just solder the wires... a good solder iron will get rid of it or if you want to use a butane one
it worked. it is kinda quiet. but thanks for showing me which part of the jack was left right and ground
+Braden Leech The speaker may require more volts then what the 3.5mm jack can provide. I believe that the average on all mobile devices are 3 volts. So if you have a speaker that requires 5 watts to run, the speaker will be operating at a lower volt so the volume wont be loud. But what is great about running speakers at lower volts is that you don't blow them out as easily.
Or you can try using a higher gauge wire.
+DARTHZANRUIT talking about loudnes i connected my 750watt sub and it was actualy just like i wass olaying with my amp at the lowest volume ;D
Thanks so much for this! i was able to convert my old tv speakers into some epic phone/computer speakers!
I did the same thing to an old broken boom box
I'm doing the same, I'm taking the two 8 Ohm 20 Watt speakers from my old broken tv and trying to figure something out with those.
read the screen
Liam Jackson if they are 8 ohms you might want to use the speakers in parallel so that it drop the ohms rating down to four... for smaller things like that you're definitely going to want to use lower ohms.
@@quentinspencer1335 lol
You spend way too much time stroking the cables mate...
EPICLY SIMPLE lhh
@EPICLY SIMPLE ikr! It made me feel uncomfortable lol
Not sure what he did or what good it did? He just Clip the fuzz
ah yes, the infamous royalty free music.
very helpful, and thank you for taking the time to do this educational video. I have one question though, my jack has four (4) rings. would you happen to know what the fourth is and are they in the same order? (tip=left, followed by 2nd ring=right then 3rd=gnd 4th=???) thank you in advance.
They are in same order, the fourth ring is for microphones
one of the rings is microphone
Thank you so much for this video...I tried it and it WORKS...yessss.... :)
Aswin k v you are genius.
I also wanted to do the same thing and you helped me do it.
And it worked🤘👍
If you think that connecting a few wires is "genius" I feel sorry for you.
Ok, it's for single speaker . Wat abt for 2 speakers......How to connect with speakers to 3.5mm jack
Yeah same problem
Wire both speakers together
For the record, the second part is the "ring" connector. In the video the first letter is illegible, so it looks like a, x, v, etc. RING. With an "r"
what in the fuck....That is an R....please if you are going to troll gtfo.
"Gröd", "GjøD", "GlaD", "GjaD", I wonder which one it is? Oh well, I'll wind up connecting it all to 220V anyway, as per usual; who cares what it says anyway?
A lovely song by the way. I played the video on repeat for an hour in my little workshop of horrors while dilligently following the steps, and I forgot to turn down the volume knob, and here I am, making my way to the bloody asylum.
I couldn't get it to work. Not sure what i did wrong. Whats supposed to heppen with the left?
My laptop's sound chip is dead so my on-board speakers don't work and neither does the 3.5mm output. So I'm looking to buy one of those USB sound adapters, connect it to a USB port internally and wire the laptop's speakesr to a 3.5mm jack to plug into the sound adapter (stored inside the laptop).
Will this work? :P
My guy legit filming wit a potato, great video tho lmao
Very helpful video 👍🏻😊
Thank you for doing this video it really helped.
This wroks , thank you. But my speaker plays sound quuite soft, at the level of headphone sounds, even softer. What am I doing wrong?
I have a question about a wire Jack I got, basically, there's an adapter with 2 input jacks, and and there's a wire with 2 output jacks. They're both 3.5mm, I bought the adapter from Amazon for a headset, problem is, the jacks aren't connecting. I'll put it in, then I will use all my force (I'm not that strong unfortunately) to try to connect it. Any solutions?
maybe you have to use a mono plug ...the 2 outs are left & right?
great video and very well explained.
🤔 you do know that you can actually order a 3.5 mm open in Jack male or female and by the matching Connection in clamping on the end to make a seamless fit to whatever product you're adding it to. For instance the Google mini plug connector you can buy the matching female plug connector and attach that to the open end 3.5 mm open end wire....ijs
Couldn't finish!! Annoying music, unnecessary steps and u just take to damn long!
I couldn't find better words
Reminds me of my first time
2:10. I'm done, too. TERRIBLE!
Why do we need right and left? Is there a way to combine both of them? I don't want bass dropping harder on one of them than the other
bass is generally always written in mono, so it makes no difference.
I tried this with my speakers on my stereo but I was just getting noise, I don’t know if it’s due to low quality parts or a poor connection. I get no music through the 3.5mm jack.
what does the ground attatch too? and as for all of the stray strands you said it was best to tape those back right?
It’s for safety for shock bout you don’t really need them
can i connect speakers to cut off earbuds ?
That why I'm here, trying to connect earplugs to old stereo speaker. Experiment really. I know jack about electronics. It's never as simple as cut wires and tie 'em together like some think. More technical than that.
alright.
I have old tv speakers, one speaker has a ground wire and left wire, the other has a ground wire and right wire. What should I do for power?
Very annoying music. Couldn't be bothered as the meter equipment looked like something from the 1970's
Ur mom looks like the1970s
And they still sell the exact same kind today and they do the exact same thing they did in the 70's. Even the 200$ units you can buy today look the same so.....
Can you please write here which colors goes where? No colors visible in your video.
damn.. i had to fast forward through everything. get to the point bro. thanks for uploading cheers
Hello , i have a jack that contain a gold,green,white and black wire how to connect it
Volume is very low when I connected like this.
hi, thanks this help me a lot...
question where is the ground on the speaker? with the righ or the left?
Ground is not on the speaker.
apakah ada tutorials cara agar suara microfon dari dvr xmeye cctv bisa muncul dan keras suara ke speaker aktif
i connect the breaking of two wires in earphone but it is not working...why?can u plz explain
good video . good BG music. & nice handwriting :)
informational (Y)
Good day I need your help I have a sony LBT-N550 home amp trying to add a 9mm aux jack from the inside
Is there any way to connect a 2.5 mm audio jack cable to a 3.5 mm audio jack? Sorry for my name ha. I am trying to use it for input and output but my 2.5 cable has 4 "cords" and my 3.5 jack has 3 "cords"
Thanks. This helped alot
Is this an art project or instructional video?
just turn off the audio and play at 2x speed
That camera quality
Barely hear anything. How to add amplifier to the circuit?
Nice vid! Thank you!
Isn't there any other way to find GND and right connections?????
Terabyte speaker memri card vala hai usme 35mm jaick kaise lagega paise jarur btana
and what amplifier can i make to amplify it?
Hello !!!
I connected the audio jack with speaker (4 Ω 3W) but the sound is too low like earphones...
Any solution for that???
+TwoGuidosGaming
thanks dude...!!!
I will try...!!!
I am trying this amplifier ckt with SONY speakers of 30w , 4 ohms configuration. Is this Ckt compatible with the speakers configuration and How to install this amplifier circuit with the speakers?
manish ambekar
Because it's not amplified. It needs power. Like a A/V receiver. That's why computer speakers are usually (99%) self powered (plugs into an outlet).
@Heanth Das Source-> Amp-> Speaker. It's that simple. Google the spec or data sheet for the amplifier model you have and use a multi-meter. Gluck
thanks for the idea!
You helped me + 1 sub
It was good but output is not good in my case... phn's sound is more than speaker .. wht to do
Attach the speakers together in parallel if you have two or more of them. If you only have one speaker then you're going to have to deal with it. If you're wanting to make it any bit louder you're going to have an amplifier
hi..
thank you for the video.. I am just a beginner. I have a question please.
I have got two speakers from a friend..
May be a kind which eventually connects with a sub-woofer.
But I want to connect it to my audio interface (Focusrite 2i2). This audio interface has 2 stereo output slots for 3.5 mm jacks. I think one for right, one for left.
But these speakers have wires at the end of cable, instead of a 3.5 mm jack.
how do I connect a 3.5 mm jack to the ends of the left and right speakers with wires at the end?
or Is there any converter like that, which takes in wires, and gives out two 6.2 jacks to be connected with sound cards?
Thank you!
Syed Armaghan Hassan if u solve this just tell me im facing the same problem
Syed Armaghan Hassan too searching for some simply connector :-/ But i found on ebay only UTP CAT5/CAT6 Cable to Audio Video Phono RCA Male Connector Jack Plug
I actually bought KeyRig 49- A USB cable midi keyboard. You dont even need an audio interface for that :)
Syed Armaghan Hassan
Syed Armaghan Hassan
Bhai speaker ke aux cable laga ke CPU me chalake dhikhao
Speaker sound is very low what to ?
After connecting the volume was very low. why so?
akhil kusuma
Same here.
The volume is too low
need an amp tp.boost volume
You must be using too big of speakers... that or you're not properly connecting your two speakers together. All you have to do is Kinect the positive to one of the speakers and then from that speaker positive side attached it to the other one on the positive side, do the same for ground and you're done.
Can we connect with Bluetooth
wheres the other 2 wires for headphone wiring? i only see the 2?
did u only use 1 side?
TheDiscipleOfHell yes, i think he did
Why do all those steps if not gonna attach amplifier?
Very nice / Thanks
Lors of explaining good job
I burned down the house...thanx
Splicing speaker wire? Next time take off that special riding helmet you wear- that your Mom bought you and maybe you'll hear the fire alarm going off. Well i hope you had good insurance and no one dieded.
@@MrLucifuge1973 I think it was a joke.
It looks like he is watching another video while doing this.
Thanks!
what kind of wire you use connecting the 3.5 jack and the speaker?
U don't need to cut off the plastic or burn the enamel of the wires...both of them burnout themselves on soldering.:((
Nice trick....
thank you...
The music made me run away
can play and show once.
Hi and thanks for going to the trouble
i will go buy new speakers thanks but thats alot of work
ugh I can't follow along with the blurry camera! even at 1080 his camera only takes it in like 144 good grief
thanks but I could do without the music..
what is at 7:18 white white plz help me
that's just a connector. You can either solder wires or connect them regularly by twisting them!
But where is the result? Go tired 😴?
why it does not play loud
you kidding me....
cuz the Signal is meant for headphones which are quiet when Not in ya ear. the speakers go a Bit louder cuz of the better Sensitivity and lower impedance. I Do not recomment doing this without an amplifier because this overloads the small amp in the source Device and it Might break. its Not Common But it happened 2 me once.
do we need a power source
ACHILLE MR HACKER your phone is the power source dude... you're charging a battery inside your phone every time you plug it up to the wall... duh.
ACHILLE MR HACKER Not to just get it to work but if you need any type of "real sound" (ie more then a whisper) then you'll need amplification. A sound bar, a/v receiver or powered speakers for example
how to connect dvd to phone using head phone pin
Um what? Why?
Please kill the music. It distracts immensely away from the concentration needed to better understand the video. It's definitely not needed (or reduce the audio to a trickle). The volume of what appears to be 2000W amp disbursement blew out my ear drums and now I'll probably need medical care to repair the damage to the inner ear. Again, if you're going to be using audio within the video, it is vital to understand what you wish the viewer to understand. That is what makes for a successful video - more understanding and less disturbance for the viewer is crucial.
The content u r showing.....is not able to see....plzz dont do such excess zoom
u are my friend :D
use nice camera i can't see it correctly in hd quality also
get your eyes checked then
lmao
Just do one thing,put ur hand inside the camera.
what is GND
ground
GRD- EARTH CONNECTION WICH YOU HAVEN'T GOT IT HERE
Would've given a thumbs up if you had just narrated yourself instead of reading your writing to loud obnoxious music. .5 stars
Hello bro...
Do you have any Instagram or Facebook.
I get sound, but it sound really low and weakPLEASE HELP
Yes that is what it says in the description.
make an amplifier circuit, simple....
R u serious man
MY NAME
HI....
actuactally it really work.Thank u for the video.
I didn't understand last one min
useful ..............
why bat the end, .... fuck
Writing is not clear, music is frustratingly annoying,
use the nail clippers for your nails not the wire
Blurry
Why not just buy a new stereo