As the twins would say, "Oh Yay!!" This is a wonderful project. Zee is so elated! The Bronco is so straight. Great project, and one I will certainly watch!❤❤❤
You know, being i was born in the 70s. I resent the fact I'm an old geezer, but that bronco did bring back memories, Hank lol. God bless you and with your find, guys.
These girls are lucky to have such an awesome grandpa and I love how they are interested in learning about operating machinery and working on vehicles. A great skill to have 👍🏻
you cant beat the smiles on their faces its priceless the odometer will change when you change the rear end and you should put the fuel pump on relay and switch power from the ignition switch
@@fordman7502 The point I am wondering about is why the pump has its own switch instead of connecting the pump to the ignition switch. In this configuration, you have to remember to switch it on and absolutely to remember to switch it off. If it were connected to the ignition switch, it would be a no-brainer.
I noticed that when you returned back home from driving the Bronco with your Granddaughters , you turned the vehicle off and then the fuel pump ! Good, now some info for you , electric fuel pumps are pressure sensitive, the needle and seat in the carburetor will keep it from over flooding ! Now when you turn the vehicle off and you turn off the fuel pump, when you go to restart the vehicle right afterwards, please just crank the engine over without pumping the gas pedal, because you will be adding fuel to fuel vapors already in the cylinders, making it harder to start , it should fire on its own then turn on the fuel pump , you will find it will start easier and use less gas ! Give it a whirl and see how it works !
You don't need a lift kit on this Bronco. It is perfect as it is. I would simply use the current tires and get wheels with more back spacing. The aluminum 15 inch ones that came on later Broncos are pretty nice for looks and function.
Hank, I realize it's probably too late now but, if you pull those cotter pins and remove the bolt pins, then hit the seat release in the back, the whole seat comes out and leaves the brackets attached.
Warms your heart to see the girls working along side their great grandpa! Him helping out with the cleanup holding the trash bag, giggling with a big smile when the girls make their funny comments! ❤ I'll be patient but can't wait for the next one. Papa Ham, I'm thinking you should just haul all the seats over to the upholstery guy and let them all be completed at the same time instead of waiting another few weeks on the one you'd take over after the first two are complete! 😉 Guessing they're in work already by now?
Man, the look on their eyes when they saw that bronco good job Hank those girls are lucky to have a Papa Ham like you!! You are making memories They will have a lifetime. Oh almost forgot please install a fuel pump relay on the ignition switch so they don’t have to remember that stupid toggle switch lol
You're one heck of a grandpa! It's not just the truck, but I can see in the twins faces the love and time you give to them which is priceless. I'm hoping to be at least half as good as you are to my grandaughters. Hhm... I have a 1980 Dodge Ramcharger I might just have to keep around as a fun project truck for my grandaughters for when their as old as your girls. God bless!
It's so awesome to see the happiness in their smiles and eyes. They will always cherish these moments. I have always done similar for my daughter. Such great role models. Look forward to seeing the vehicle complete. Thank you for being such a great role model and support for your granddaughters, but also to other parents. Thank you for sharing. Cheers.
You girls are spoiled , well you spoil us ha ha love it . This brings back memories , had a buddy with a 1979 Bronco one with a 1985 Bronco and I had a 1978 K5 Blazer loved those 2 door SUVs with the top off . your girls are going to enjoy this vehicle .
These two girls are awesome. I love that they get excited over the older trucks. A nice lift, and some repairs will make a nice ride for her. Get the fuel system diagnosed and she’s on her way.
Hank, I know you love them granddaughters at 15 but we all know that 15-year-old girls or boys either one or not going to remember to turn the switch off or on it be just as easy to wire that switch in on the fuse box on the side of the fuse box which becomes hot when the key comes on this way when they turn the key on to you The fuel pump turns on when you turn the key off the fuel pump shut off because I don’t think they will remember that I really don’t but it looks like a nice build. Look forward to seeing more things done.
Glad it’s another classic build. I can’t wait to see that square body!! Get another video out of it soon lol. I’m inpatient 🤣 poppa gonna have to get them a k5 blazer!
I m glad 🙂 to see that you are getting it for the other girl 🧒 one can have a truck 🛻 and the other can have a bronco you are a great grandfather to the girls 🧒
I thoroughly enjoy watching your videos with you and your granddaughter's I have started doing more things with my grand-kids now too thank you for the inspiration
Rewire the fuel pump correctly and they (and you) won’t have to worry about it. Also, I would suggest that you have a look at everything they threw in the garbage bag. They were just putting everything in there without regard for what it might be.
Not only is the rear seat easily removed, but so is the tailgate. Just unhook the two straps and raise the tailgate halfway up, then pull the right side of the tailgate toward you and it comes right off.
You NEED to put a 4 core radiator back in it, being an automatic with A/C and you're moving it closer to the equator. Surprised that it hasn't already grossly overheated.
Hank your a good down to earth dude! Dub and zee are very lucky young lady's . They have been raised right.most girls that age don't have the energy or ambition to do half the things those to do. This is something they will always remember! Much respect for you and the twins
Y'all comments given ole' Hank all the credit dag-gone-it, when it was Grandma Boss Lady who found the dab-nabit Bronco, and she even told Hank, lol. The girls smile's said it all? Anyway grandma & grandpa you did it again, you have a blessed family, thanks for sharing your vids.
Even though Hank, you’re only 9 yrs older than I am! Could you be my Gampa and buy me a nice 79-86 Bronco 😂! That thing is sweet, just what I’m lookin for!
i would remove that toggle and connect the pump to the ignition. thats how it should be. that way the pump is on when the ignition is on and off when the ignition is off.
Hi Grampa this is quite an upgrade from the "project" truck. One cheap suggestion to help keep bugs out of the AC condenser and rad is to hang a piece of fly screen in front behind the grill. Easy to do and effective. Have a nice day . Canadian retiree here. Tom up in Canada in the Maritimes at the NB-NS border.
It is always a good idea to "drill" into the twins the necessity of slowing down before you make a sharp turn. These Broncos are not unsafe as for as rollovers are concerned if driven properly. This applys to all vehicles with a high center of gravity . Tom in Canada at the NB-NS border.
When I drove for the morgue in Pinellas county Fl "_Tampa Bay" .whenever I transported a Decomp .Company policy said to turn the air conditioner off and run with the windows down to prevent that smell from getting into the cabin filter 😮
What you need to do is run the hot wire to the ignition switch from the relay for the fuel pump so that way when you turn the key on the fuel pump will come on and when you turn off the ignition switch the fuel pump will turn off you will need a relay switch as well because a fuel pump will draw to much power on the ignition switch you can look on line on how to huck up a relay switch. That way you or the girls don't have to worry about the gas filling up the engine and destroying the engine
Hey bud I was watching this episode and noticed something that I really think that you need to address. You really need to get the girls to pit there hair up everytime that there is a chance they will be using rotary tools while working with you.
A beautiful car, my stepfather had a Chevy Blazer in Germany, it sucked everything out of it, camping site back in 1982, nice car but Bronco is good too, thank you very much for having such warm-hearted daughters.
Omg! What a beautiful ford truck. I love those years 82-85 those trucks where awesome nice to see the girls smile take Good care of that truck have fun with it have a great week
You probably also need to get a cabin air filter, and a new engine air filter. but besides that good job on choosing it have fun working on it. You got a great day to do it and the girls look like they love it. God bless you all.
It's great to see both your daughters working on a classic Ford bronco 😎😃, I hope they restore it, how's the Chevy truck came out,send me pictures, Jerry
That is an Awesome Bronko. I had a 78 and a 69 and loved them both. I love how you got the girls involved in taking the seats out and working on it. Way to go Dad🤠🤠🤠💗💗💗
Option 1 which I would prefer is to go back with the manual fuel pump. If I recall that’s what my old bronco around that year model had. I’m thinking he took a short cut with the electric pump and really took a shortcut wiring a toggle switch. If staying electric, wire it to ignition hot and throw the toggle away. While you have seat brackets out (didn’t have to remove rear ones), I would go ahead and order a carpet replacement as you only have to take out center console and some side trim pieces. Check out the tie rods so they don’t have to deal with wobble in future…I would go with a slight level kit and not a lift kit. The speedo is off since he swapped the rear diff to highway gear. Speedo is at tranny and that front diff needs the new seal and put in to match the rear before things get ripped up in the drivetrain. Nothing hard to get her fixed up but you do want to get the correct radiator back in there - auto trans, AC and v8 will need it. The 4core will enable greater volume of water to be cooled. I personally would just get seats and the above done and forget the paint job…just wash and wax her up and treat the rust on tailgate. Those rust once the window seal starts letting water in. Rust treat the inside of tailgate while apart and clean out the drains at bottom or drill some to keep water from standing.
I'm so glad you double checked their garbage bag. I was like.. GIRLS!!!! That mirror can be replaced, and that metal part which you called break calipers could be useful.
I would advise against a 3 inch lift. I had this exact same vehicle as a senior in high school in 1986. After we did a similar lift, we went to a 2 inch lift because of stability issues at +35 mph. They become top heavy!
Love that you guys got this. I had a 1984 f150 with a boss 302. Two tone, black and silver with red pin stripes. 4inch lift. Sold it to my brother unfortunately and now it’s just sitting collecting rust. Can’t wait to see what you guys do with it.😊
I have a 87 with 9"" of lift. 6 " pro comp suspension and 3"body sitting on 35s plenty of room for 40s wanted to send pics but your channel doesn't let me been a fan of your show and have been watching for a long time love your stuff God bless you and yours ❤
Y'all should've kept that paper at 49:16 timestamp, that looks like something from a junkyard or like a Sunshine you pick and pay kinda deal. It was probably important saying something that's been replaced on the Bronco. The little hole in it was for a metal wire to go through and attach and tie to whatever part it was referring to. But very nice find I've always wanted the old Bronco like that, I'm pretty sure it has a 351 in it. Not sure if you have the Winsor or Cleveland but very nice if you get it fixed up! Love to you here from South Carolina 💪
Enjoy that Bronco! You're going to love it. I have a Bronco addiction myself. :) Here's the story of my latest purchase - a 1995 - th-cam.com/video/gU9cTAjSvsU/w-d-xo.html
It’s the OJ bronco!! In black LOL Nice find Hank! They looked actually surprised and excited about it. Will be fun to see it brought back road worthy y’all! Take care and God bless guys
WATCH: th-cam.com/video/z1nMjvnXQWU/w-d-xo.html
As the twins would say, "Oh Yay!!"
This is a wonderful project. Zee is so elated! The Bronco is so straight. Great project, and one I will certainly watch!❤❤❤
You know, being i was born in the 70s. I resent the fact I'm an old geezer, but that bronco did bring back memories, Hank lol. God bless you and with your find, guys.
These girls are lucky to have such an awesome grandpa and I love how they are interested in learning about operating machinery and working on vehicles. A great skill to have 👍🏻
Nothing like family working together! Lovely twin sisters and their grandpa is a special thing building memories. God bless you guys.
Love what you and your grand daughters are doing. Great job Papa Ham.
you cant beat the smiles on their faces its priceless the odometer will change when you change the rear end and you should put the fuel pump on relay and switch power from the ignition switch
I was really wondering about the fuel pump, why isn't it connected to the ignition switch.
@flybywire5866 has a manual fuel pump in 89 for the electric fuel pump there was no spot on the engine a mechanical fuel pump
@@fordman7502 The point I am wondering about is why the pump has its own switch instead of connecting the pump to the ignition switch. In this configuration, you have to remember to switch it on and absolutely to remember to switch it off. If it were connected to the ignition switch, it would be a no-brainer.
It could have been possible the person who hooked up the fuel pump did not know how to hook it up through the ignition switch is my guess
I noticed that when you returned back home from driving the Bronco with your Granddaughters , you turned the vehicle off and then the fuel pump ! Good, now some info for you , electric fuel pumps are pressure sensitive, the needle and seat in the carburetor will keep it from over flooding ! Now when you turn the vehicle off and you turn off the fuel pump, when you go to restart the vehicle right afterwards, please just crank the engine over without pumping the gas pedal, because you will be adding fuel to fuel vapors already in the cylinders, making it harder to start , it should fire on its own then turn on the fuel pump , you will find it will start easier and use less gas ! Give it a whirl and see how it works !
You don't need a lift kit on this Bronco. It is perfect as it is. I would simply use the current tires and get wheels with more back spacing. The aluminum 15 inch ones that came on later Broncos are pretty nice for looks and function.
Hank, I realize it's probably too late now but, if you pull those cotter pins and remove the bolt pins, then hit the seat release in the back, the whole seat comes out and leaves the brackets attached.
I know, I've been talking to my tv telling him to pull those cotter pins right next to the bolts he's trying to loosen. 😅😂
@@williamneary8264 Was doing the same thing.
@@williamneary8264 If only he knew how simple and quick it is to remove that seat!
Hank! WTF you're making that seat removal way too difficult
This is a simple yes or no question is that for front and back seats?
Warms your heart to see the girls working along side their great grandpa! Him helping out with the cleanup holding the trash bag, giggling with a big smile when the girls make their funny comments! ❤ I'll be patient but can't wait for the next one.
Papa Ham, I'm thinking you should just haul all the seats over to the upholstery guy and let them all be completed at the same time instead of waiting another few weeks on the one you'd take over after the first two are complete! 😉 Guessing they're in work already by now?
Check the fuse box for a key-on fuse slot and wire the fuel pump to it.
Man, the look on their eyes when they saw that bronco good job Hank those girls are lucky to have a Papa Ham like you!! You are making memories They will have a lifetime. Oh almost forgot please install a fuel pump relay on the ignition switch so they don’t have to remember that stupid toggle switch lol
You're one heck of a grandpa! It's not just the truck, but I can see in the twins faces the love and time you give to them which is priceless. I'm hoping to be at least half as good as you are to my grandaughters. Hhm... I have a 1980 Dodge Ramcharger I might just have to keep around as a fun project truck for my grandaughters for when their as old as your girls. God bless!
It's so awesome to see the happiness in their smiles and eyes. They will always cherish these moments. I have always done similar for my daughter. Such great role models. Look forward to seeing the vehicle complete. Thank you for being such a great role model and support for your granddaughters, but also to other parents. Thank you for sharing. Cheers.
You girls are spoiled , well you spoil us ha ha love it . This brings back memories , had a buddy with a 1979 Bronco one with a 1985 Bronco and I had a 1978 K5 Blazer loved those 2 door SUVs with the top off . your girls are going to enjoy this vehicle .
These two girls are awesome. I love that they get excited over the older trucks. A nice lift, and some repairs will make a nice ride for her. Get the fuel system diagnosed and she’s on her way.
I really hope the girls appreciate how cool their Grandpa Ham is! Yall are truly blessed! Especially grandpa Ham!
When you're a good girl and you do good things you deserve the world ! Being a good person even if you're twins you deserve double the riches
Hank, I know you love them granddaughters at 15 but we all know that 15-year-old girls or boys either one or not going to remember to turn the switch off or on it be just as easy to wire that switch in on the fuse box on the side of the fuse box which becomes hot when the key comes on this way when they turn the key on to you The fuel pump turns on when you turn the key off the fuel pump shut off because I don’t think they will remember that I really don’t but it looks like a nice build. Look forward to seeing more things done.
Hank, the back seat folds up against the front seat so you have access to the bolts. That's a nice gift for your grandaughters.
it also has R pins to release it to pull it out without unbolting it
Should check lmc truck for all those window internal parts, they carry carpet and headliners and most interior parts for most those models too.
Glad it’s another classic build. I can’t wait to see that square body!! Get another video out of it soon lol. I’m inpatient 🤣 poppa gonna have to get them a k5 blazer!
Bed getting painted today.
@@HamiltonvilleFarm hopefully they get a video up soon!! You’re going to have to whip coop to get in gear lol
New rims, tires, upholstery, nerf bars, paint... all the things that don't need new.
I m glad 🙂 to see that you are getting it for the other girl 🧒 one can have a truck 🛻 and the other can have a bronco you are a great grandfather to the girls 🧒
So what’s the story on the square body
I agree 100% and I truly believe those girls are going to get some good enjoyment out of those vehicles they already look ecstatic
Love seeing the girls in your videos. Brings back the memories of my oldest out in the garage with me.
Or wiper fuse
Love those old Broncos!! Dub and Zee are gonna have fun driving it! Thanks for sharing Hank! 😎
You bet!
I thoroughly enjoy watching your videos with you and your granddaughter's I have started doing more things with my grand-kids now too thank you for the inspiration
Good to see kids that appreciate what they get👍
I love the way you teach them
Rewire the fuel pump correctly and they (and you) won’t have to worry about it. Also, I would suggest that you have a look at everything they threw in the garbage bag. They were just putting everything in there without regard for what it might be.
Not only is the rear seat easily removed, but so is the tailgate. Just unhook the two straps and raise the tailgate halfway up, then pull the right side of the tailgate toward you and it comes right off.
Hank done good yet again! 👍🏼
You NEED to put a 4 core radiator back in it, being an automatic with A/C and you're moving it closer to the equator. Surprised that it hasn't already grossly overheated.
Hank your a good down to earth dude! Dub and zee are very lucky young lady's . They have been raised right.most girls that age don't have the energy or ambition to do half the things those to do. This is something they will always remember! Much respect for you and the twins
Hank you are the best and the twins treat you with respect and they earn their way. That's what a family should be.
“ IT don’t smell dangerous “,,,,, good advice for life
that is a quick release back seat - pull the pins !
I love the old broncos
Hank. you have two beautiful nieces there and they seem like they want to learn about everything. Good for them.
That pump can be easily wired to shut off when the key is off.
She was grinning ear to ear the whole drive in the bronco
Very nice but you can wire it so you don't have to use a toggle switch for the fuel pump. Very simple mod.
Very cool Bronco
I hope them grandkids keep both them vehicles for the rest of their lives if they sell them they will regret it later
Y'all comments given ole' Hank all the credit dag-gone-it, when it was Grandma Boss Lady who found the dab-nabit Bronco, and she even told Hank, lol. The girls smile's said it all? Anyway grandma & grandpa you did it again, you have a blessed family, thanks for sharing your vids.
That’s right!😂 thank you
Pa-pa, u know ur gna be get'n a call say'n it won't start or pa-pa the bronco quit running 😂
Kind of miss my old 85 Ford bronco mine was not automatic there’s a three speed, lockout, hubs, red, and white
I have a 12 year old granddaughter. Can’t wait until we can go car shopping or maybe I can. Lol
u know when u see wire nuts in the spaghetti and tie wire on the exhaust its gonna be a good one
I had four of the older broncos. They are powerful. And mine were on steroids 😅.
Even though Hank, you’re only 9 yrs older than I am! Could you be my Gampa and buy me a nice 79-86 Bronco 😂! That thing is sweet, just what I’m lookin for!
The Twins Reaction Priceless
Immaculate Shape For It's Year&Age
i would remove that toggle and connect the pump to the ignition. thats how it should be. that way the pump is on when the ignition is on and off when the ignition is off.
My first new car was a 1988 Bronco. Straight 6 and a 5 speed. 😅
God bless you Papa, h, you're a good Grandpa.
Needs a headliner too.
Grandpa you got to be feeling pretty Awesome, Big smiles on Both girls, Ford Hell Yeah..
Hi Grampa this is quite an upgrade from the "project" truck. One cheap suggestion to help keep bugs out of the AC condenser and rad is to hang a piece of fly screen in front behind the grill. Easy to do and effective. Have a nice day . Canadian retiree here.
Tom up in Canada in the Maritimes at the NB-NS border.
It is always a good idea to "drill" into the twins the necessity of slowing down before you make a sharp turn. These Broncos are not unsafe as for as rollovers are concerned if driven properly. This applys to all vehicles with a high center of gravity . Tom in Canada at the NB-NS border.
When I drove for the morgue in Pinellas county Fl "_Tampa Bay" .whenever I transported a Decomp .Company policy said to turn the air conditioner off and run with the windows down to prevent that smell from getting into the cabin filter 😮
What you need to do is run the hot wire to the ignition switch from the relay for the fuel pump so that way when you turn the key on the fuel pump will come on and when you turn off the ignition switch the fuel pump will turn off you will need a relay switch as well because a fuel pump will draw to much power on the ignition switch you can look on line on how to huck up a relay switch. That way you or the girls don't have to worry about the gas filling up the engine and destroying the engine
Hey bud I was watching this episode and noticed something that I really think that you need to address. You really need to get the girls to pit there hair up everytime that there is a chance they will be using rotary tools while working with you.
I'll never get tired of seeing kids appreciating a grandparent's gesture
A beautiful car, my stepfather had a Chevy Blazer in Germany, it sucked everything out of it, camping site back in 1982, nice car but Bronco is good too, thank you very much for having such warm-hearted daughters.
Omg! What a beautiful ford truck. I love those years 82-85 those trucks where awesome nice to see the girls smile take Good care of that truck have fun with it have a great week
You probably also need to get a cabin air filter, and a new engine air filter. but besides that good job on choosing it have fun working on it. You got a great day to do it and the girls look like they love it. God bless you all.
love the twins
It's great to see both your daughters working on a classic Ford bronco 😎😃, I hope they restore it, how's the Chevy truck came out,send me pictures, Jerry
Granddaughters!! 😊. Truck is in paint booth👍
FORD BRONCO 💪💪💪💪
That is an Awesome Bronko. I had a 78 and a 69 and loved them both. I love how you got the girls involved in taking the seats out and working on it. Way to go Dad🤠🤠🤠💗💗💗
Should've just pulled the pins out of the back seat & you wouldn't have to take the bolts out but oh well
▶️ K10 project here: th-cam.com/play/PLLvtX6M7iiPATePoDBum9BpWU-7-gHxAZ.html
@@HamiltonvilleFarm check the trash bag the twins might have put some car parts in it!!!
@@RAMTRK98 VW 1.9TDI with a 300bhp mod in the ford 4x4... aka high power high mpg.
@@RAMTRK98 VW VR6 with a supercharger 600bhp is possible...
Option 1 which I would prefer is to go back with the manual fuel pump. If I recall that’s what my old bronco around that year model had. I’m thinking he took a short cut with the electric pump and really took a shortcut wiring a toggle switch. If staying electric, wire it to ignition hot and throw the toggle away.
While you have seat brackets out (didn’t have to remove rear ones), I would go ahead and order a carpet replacement as you only have to take out center console and some side trim pieces.
Check out the tie rods so they don’t have to deal with wobble in future…I would go with a slight level kit and not a lift kit. The speedo is off since he swapped the rear diff to highway gear. Speedo is at tranny and that front diff needs the new seal and put in to match the rear before things get ripped up in the drivetrain. Nothing hard to get her fixed up but you do want to get the correct radiator back in there - auto trans, AC and v8 will need it. The 4core will enable greater volume of water to be cooled.
I personally would just get seats and the above done and forget the paint job…just wash and wax her up and treat the rust on tailgate. Those rust once the window seal starts letting water in. Rust treat the inside of tailgate while apart and clean out the drains at bottom or drill some to keep water from standing.
I had a 1981, that roller is very common too go bad. I had to replace mine. I really loved mine.
Hank my question is why do you need to put a lift kit on the Bronco?
I'm so glad you double checked their garbage bag. I was like.. GIRLS!!!! That mirror can be replaced, and that metal part which you called break calipers could be useful.
I’m thinking you nailed it Hank, This way they’ll both have a 4x4 to drive later on.
What a great grandpa!!
l know that you know that those girls are just so darn gorgeous
I was born in early seventies too and Hank buddy we getting old lol brings back memories riding having fun in same yr and same color lol
I would advise against a 3 inch lift. I had this exact same vehicle as a senior in high school in 1986. After we did a similar lift, we went to a 2 inch lift because of stability issues at +35 mph. They become top heavy!
Excelente te felicito saludos abrazo grande desde argentina ❤😊
Hi Hank. On that ford bronco for the back window you can buy that roller brand new from lmctruck and it will be a metal type
Love that you guys got this. I had a 1984 f150 with a boss 302. Two tone, black and silver with red pin stripes. 4inch lift. Sold it to my brother unfortunately and now it’s just sitting collecting rust. Can’t wait to see what you guys do with it.😊
Can’t wait to see both of them done
Never seen the girls happy Hank you are best grandpa in world
Sooooooo many possibilities. That build would be soooo much fun
Not being negative but your girlies are novecevs. I love them.
the two very young princesses, get spoilt rotten by their grandpa. 👈👺👀👀👍
retractable running boards would be really cool on that Bronco!
82 Bronco has a weak frame right behind the front suspension. Check it out Hank
True I know a guy broke three of them brand new...I likem they ride nice.
That's a classic truck take care and God bless y'all and I used to have a bronco 2
I have a 87 with 9"" of lift. 6 " pro comp suspension and 3"body sitting on 35s plenty of room for 40s wanted to send pics but your channel doesn't let me been a fan of your show and have been watching for a long time love your stuff God bless you and yours ❤
Cool truck granpappy trying to save some pulling that stuff out the bag😂
You should get a soft top for it. Nothing nice er then a old, raised bronco with the back off. Nice trucks.
Y'all should've kept that paper at 49:16 timestamp, that looks like something from a junkyard or like a Sunshine you pick and pay kinda deal. It was probably important saying something that's been replaced on the Bronco. The little hole in it was for a metal wire to go through and attach and tie to whatever part it was referring to. But very nice find I've always wanted the old Bronco like that, I'm pretty sure it has a 351 in it. Not sure if you have the Winsor or Cleveland but very nice if you get it fixed up! Love to you here from South Carolina 💪
Enjoy that Bronco! You're going to love it. I have a Bronco addiction myself. :) Here's the story of my latest purchase - a 1995 - th-cam.com/video/gU9cTAjSvsU/w-d-xo.html
It’s the OJ bronco!! In black LOL Nice find Hank! They looked actually surprised and excited about it. Will be fun to see it brought back road worthy y’all! Take care and God bless guys