ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Test AEG Scie radiale PS254L
ฝัง
- เผยแพร่เมื่อ 6 ส.ค. 2024
- Test vidéo de la nouvelle scie radiale AEG PS 254 L. Outillage idéal pour les boiseux exigeants. Puissance 2000w, lames en 254x30 et éclairage par LED & laser. A bientôt pour le test complet en photos sur www.zonetravaux.fr
Je l’ai vu en magasin et la vidéo permet de la voir sous tous ses angles c’est cool pour le prix avec 6 ans de garantie j’y réfléchis
Tips and Test: Before you want to buy a miter saw.
Very important if you would like to saw with precision. (avoid torsion as much as possible)!
Always choose a Miter saw with a handle positioned in a vertical line above the saw blade.
Everything must be aligned, slide rails, handle, and saw blade,it is much better this way the blade will not tilt.
Because there is some torsion in the aluminum housing .
And choose an engine with softstart on it to prevent wear of the gear and worm shaft.
It is very important that everything is aligned.
Here are some examples to show how the handle must be positioned above the blade.
Bosch gcm 800 sj / Bosch gcm 8 sjl / Evolution rage 3 / FESTOOL KS 60 / HITACHI C12RSH2 / Bosch GCM 8 SDE / FESTOOL KS 60 E KAPEX / Metabo KGSV 72 Xact / Bosch PCM 8 SD.
(This also is the case with the Miter saw without the slide rails).
(If you want). You can test it yourself at home if there is torsion in the aluminum housing.
Step-1. First you make a saw cut from +-5 mm deep in to a flat piece of wood about +- 20 mm thick to this with the normal handle positioned on the right side of the Miter saw (the wood it will remain in place until the test is completed).
Step-2. Then repeat this by pushing the saw blade down with your hand (finger) on the aluminum protective cover were the saw blade is cased in. Just now only do this without the running engine.
Step-3. Now you can see if the saw blade will be positioned in or next to the saw cut. If the saw blade is (+- 0,2 / 0,5 mm) next to the saw cut then there is torsion in the aluminum housing (test is completed).
Step-4. therefor it is much better to choose a Miter saw with the handle positioned vertical in line above the saw blade.
Conclusion: how further away the handle is from the saw blade how more chance of torsion in the aluminum housing.(don't go for that).
👍👍👍
1:24
angle de la lame vers la gauche vers la droite ?
máy này giờ còn bán nua ko
C’est quoi cette vidéo 😖
Aucune explication verbale! Pour faire ça le site de Leroy Merlin fait très bien le travail !
Et c’est quoi cette musique de film de Q des années 80?
А действительно ли так хороша эта система турбо-насоса??? Какова её мощность прокачивания стружки??.. Ведь, ей приходится - ПРОТАЛКИВАТЬ стружку в мешок!!... В то время как Пылесос - ВСАСЫВАЕТ стружку!!! - То есть: в Первом случае, мощность - максимальная в начале, на турбине, - теряется в конце на мешке-сборнике!.. А во Втором, в конечной для пыли точке - на пылесосе, мощность всасывания, наоборот - максимальная!!
c'est de la merde tout comme ryobi, j ai acheté la ryobi, retour leroy merlin, elle ne marchait pas, j ai pris la aeg, que des problèmes avec.
ouep, gros problèmes d'équerage perso, la lame à butée à 90 n'est pas à 90...