A lot of people hate body filler. But if you apply it correctly it will last for many years. I have some on my 66 Mustang. It’s been on there since 1989. Still holding up good. Body filler won’t stick to rust or uncleaned surfaces. Great job buddy. ❤❤❤
Marc I’ve been following you since you came out of school pretty well. I’m an old guy now but I can already tell you are going to be a good thinking man. Live long and prosper good buddy!
New cars are often repaired and respray at the port after shipping if any damage occurred during transport. As long as less than 3 panels are damaged the car is still considered "new".
Previous owner of the car said no paint work happened during his ownership 👀 absolutely insane !!! Great video per usual. Can’t wait to pick this bad boy up
Nice to see you back. I have to be honest I had no idea you were involved in an accident. I am glad it was no worse than it was. Maybe later you’ll feel comfortable telling us what happened. The Porsche is looking great. It’s sad to see the corners that were cut but great to know it truly will be show room when you’re done. See you in the next installment. Stay safe!
Glad you are ok, rested up, healed and ready to make more awesome content! I have to say, I love the way you explain the process while you’re working on those panels…would a car that nice deserve an entire respect?? At least the blue. Putting your touch on it would come out amazing, and you can correct past shops mistakes.
First off, glad your are alright and doing great after the accident. Also glade to see you back it and you are becoming more and more of a master. Always enjoy the videos. Keep Orange Crushing It!
oh dear sorry to hear you were in the wars again, good to see you kicking and screaming on all cylinders, i hope it wasn't too nice a car, was it yours? great work on the porka, good to see it coming on, interesting to see it been repainted, its yet another blue car that has spured me on to do some much needed rebuild on my own, an S3 and i'm going for a similar Mexico Blue (or Cyan) perhaps with a pearl finish, but i am a little concerned about some of the old plastics going back on, some need replacing clearly
@@Motorheadco A tuned BMW M5 engine. There are many M3 or M5 engines out there loaded with DTM parts that would add value to your M3. Instead of depreciate it.
Been watching the Candy Man paint some cars, and noticed that he never puts body filler on clean metal, ge always seals the metal first then adds fillers etc. Complete opposite to what you do....
![ร้อยพ่อพันแม่ - WanMai [Official MV]](http://i.ytimg.com/vi/XY2pNYASEbg/mqdefault.jpg)
Giveaway winner is Adamklein7904!!
You have to stop with the Accidents before one really gets ya.
Mark you look beaten up missed you glad you back and healing may the Lord protect you and heal you totally
A lot of people hate body filler. But if you apply it correctly it will last for many years. I have some on my 66 Mustang. It’s been on there since 1989. Still holding up good. Body filler won’t stick to rust or uncleaned surfaces. Great job buddy. ❤❤❤
Marc I’ve been following you since you came out of school pretty well. I’m an old guy now but I can already tell you are going to be a good thinking man. Live long and prosper good buddy!
Glad you're okay.
Love that method of keeping the wheel opening body line
New cars are often repaired and respray at the port after shipping if any damage occurred during transport. As long as less than 3 panels are damaged the car is still considered "new".
You’ve been missed Mark, great to see you back on the mend👍
FINALLY AN UPDATE WE LOVE YOU MOTORHEAD
Glad you are back, Mark. Hale and healthy to boot. Porsche is showing for the love!
Awesome as always. Thanks for sharing and taking us along
That quarter came out clean af!
Glad your alright and back to making videos.
Heeeeeyyyyy.. Glad your okay. Life is about and time goes fast. One more step closer to finished. Stau safe and be well. God bless
Welcome back bud! Glad you are all in one piece. Looking forward to your videos...
Good to see you back mate! Cheers from Australia!
Glad you're in good health 🙏 and back
Marc thank you for showing us how to keep that arch curve line sharp using the tape-edge technique 👍
Welcome back please be safe
Welcome back Mark thanks for the video
im from Puerto Rico i like all your content keep them coming......
Great to see you back 👍🏻👍🏻👍🏻👍🏻🇬🇧
Glad to see your back and in one piece! Looking forward to this rebuild series.
Glad your back and better now Mark been missing your videos.
Previous owner of the car said no paint work happened during his ownership 👀 absolutely insane !!! Great video per usual. Can’t wait to pick this bad boy up
Could have happened at the port...very common and they never tell the owner when it happens.
@@AutomotiveEvangelist that’s definitely most likely scenario
Glad to see you're back!
Nice to see you back. I have to be honest I had no idea you were involved in an accident. I am glad it was no worse than it was. Maybe later you’ll feel comfortable telling us what happened. The Porsche is looking great. It’s sad to see the corners that were cut but great to know it truly will be show room when you’re done. See you in the next installment. Stay safe!
Amazing work! So much goes into prep work that nobody even knows about. You guys are the best
Glad you are ok, rested up, healed and ready to make more awesome content! I have to say, I love the way you explain the process while you’re working on those panels…would a car that nice deserve an entire respect?? At least the blue. Putting your touch on it would come out amazing, and you can correct past shops mistakes.
Been looking out for this video for a long time 🎉
Glad to see you back Bro. Peace
Sorry to hear about the accident - feel better & amazing job on the gt3
great video.. take care of yourself..
Love the video. Glad you’re okay! Please be careful. Last thing you want is to end up disabled.
Good job and nice repair, we wish you good
Great work as always Mark ! Glad you are back, and glad you are ok. Sorry to hear about your accident. Stay safe !
You're always doing excellent work like your brothers hopefully after this project you'll get the rest of the E30 painted and that engine put in
Thanks!
Motörhead- between you and your brothers always impressed with your skills. Got a question what’s the best paint brand for M4 paint. B68 Yaz Blue
First off, glad your are alright and doing great after the accident. Also glade to see you back it and you are becoming more and more of a master. Always enjoy the videos. Keep Orange Crushing It!
Am glad youre good bro
Great convolessing video Mark, just had prostate cancer at the ripe old age of 52 😕
Stay out of car crashes, detrimental to breathing!
God bless you love your work and glad your well take care.
He is alive
Welcome back mark! Glad your doing okay. Long time follower. Hook me up with that super clean brother!!
Wear a respirator, man!
Excellent work as always!!!
Thank you!!
Good work 👍🏾
Glad to hear you're okay after your accident. Great stuff thanks
Nice work
Accident? Let me guess, motorcycle?😂
I'm happy you are OK! Stay safe!
oh dear sorry to hear you were in the wars again, good to see you kicking and screaming on all cylinders, i hope it wasn't too nice a car, was it yours?
great work on the porka, good to see it coming on, interesting to see it been repainted, its yet another blue car that has spured me on to do some much needed rebuild on my own, an S3 and i'm going for a similar Mexico Blue (or Cyan) perhaps with a pearl finish, but i am a little concerned about some of the old plastics going back on, some need replacing clearly
tnx for the video
what a terrible job they did on that door!! Gonna be so nice when you’re done
Nice paint job i like the color.
Hopefully you can source a way to tune the M5 engine.
What m5 engine?
Dude Marc’s putting a Honda engine in the E30.
@@Motorheadco A tuned BMW M5 engine. There are many M3 or M5 engines out there loaded with DTM parts that would add value to your M3. Instead of depreciate it.
Nice work!
Thanks!
Why didn't you remove the old paint from the rear fender before priming it?
To Puerto Rico what part San Juan
Yea! It was beautiful
Been watching the Candy Man paint some cars, and noticed that he never puts body filler on clean metal, ge always seals the metal first then adds fillers etc. Complete opposite to what you do....
Very nice
Is looking good
👍
Next time use glue sticks to pull out dents even more.
Promo'SM
🤙👏👏