Mobile App Control LED | NodeMCU | IOT | ESP8266 | ThingSpeak Server | MIT APP Inventor.
ฝัง
- เผยแพร่เมื่อ 2 ก.พ. 2020
- This Video shows how to control LED using mobile App. This is IOT based Project. In future video we will see how to control Home Appliances using mobile App.
------------------------------------------------------------------------------
Download Circuit Diagram from Link Bellow :
drive.google.com/open?id=1UL0...
------------------------------------------------------------------------------
Download Code from Link Bellow :
drive.google.com/open?id=1if3...
-----------------------------------------------------------------------------
To select NodeMCU board using Arduino IDE
Go to the File - References - Additional Board Manager URLs:
Paste this link :
arduino.esp8266.com/stable/pac...
----------------------------------------------------------------------------
Download MIT App Inventor 2 In your mobile to scan bar code.
----------------------------------------------------------------------------
⭐️Please watch the video till the end. I hope that you successfully understand. If you don't understand, please comment on my videos. I try to help you.
Thanks for checking this description.
Follow us on:
Facebook: / embedded.gate
Instagram: / embeddedgate
TH-cam: / @embeddedgate
LinkedIn: / embedded-gate
Website: embeddedgate.com/
Fiverr: www.fiverr.com/s/qoWX0Z
Upwork: www.upwork.com/freelancers/~0...
Thank you so much, your video helped me after working for a month on so many different platforms, I wish I had seen you earlier! God bless!
Thank you for your comment.
bro i have nothing to say !!!!!!!!!
got a complete tutorial , thanks a lot\
\
Works great , thanks very much for the tutorial!
on mit inventor we can control arduino remotely via Bluetooth and web.
this tutorial is so cool
Very useful bro
Thanks.. Working fine.
This is exactly what I want
Very nice
Vert nice
Thank you very very much!!!!
Thank you for your comment.
Superb bro
+SCI-PSY TECH . Thank you very much
how we can check the data is sending from app is receiving on thingspeak to confirm the data transfer ???
Please tell me, the first time everything works, but then only after double clicking and the delays are large
We are using the free thingspeak server that's why the delay is large.
It works to esp32??
Hi
I regularly watch your videos on TH-cam. They're really helpful.
Needed a small favour
Can I get Arduino code for sending sensor data from Node mcu to MIT android app through WiFi - WiFi communication
Thanks!
Hello Avinash.Thank you for your support. I'm working on same video.In next 5 days I will upload that video on youtube.
Can I use it for esp01 ?
your video tune is very energizing. Can u please share. I am really fascinated by it. Thanks. :)
you can easily get this tune on google. Search for youtube free background tune.
@@EmbeddedGate Thanks :)
i m getting error that specified url is not valid
Thank you sir for this video.
Can I get code for getting sensor data from NODEMCU with MIT INVENTOR APP on Android phone?
+Avinash Mundhe . I'm working on same project, once it's done I will make video and upload it on TH-cam. Thank you for your support.
Hello Avinash. I have uploaded video please check.
hello sir according to your shown steps i have follows the step but it taking time delay of 15s to send the data from app to thingspeak server but, yours working very fast why do my data is not send ...?
Hello Rohit. I'm using paid service of ThingsSpeak. That's why my result updated with in 1 second. You are using student account, it takes approximately 15 second to update the new data.
observe the video, he tends to pause or trim the video and then after a while he will click the button and pause again, hmmm
Hi, can i know the name of brown board that attached with Nodemcu?
zero PCB
Can't communicate with GET links. error occurs
In the serial monitor it is showing ??? for me. can anyone help please?
Yes.
Is the light control is via internet?
Yes.
Could you help me connect two LEDs to the board?
Yes
Connect gnd and another gpio pin
can you make a project videos, change led with motor servo?
+Fauzan Akbar. yes I can interface survo motor.
so, when you make this video?
+Fauzan Akbar . please explain in detail what is your need. so I will make video that fulfill your requirement.
I want to create a project about a servo motor that we can control through thingspeak.com by using mitt app inventors, in mitt app inventors, only one button which is on, if applied, that the servo motor is 0 degrees over 90 degrees for a few seconds which will then come back to that position again, and will do the same thing if you press it again
+Fauzan Akbar . Give me some time, I will post this video.
Hello,
Whatever the things mentioned in video I have done.
1. Arduino serial monitor showing continous '......... '
2. Wifi SSID & password mentioned correctly
3. Field 1 chart was updating while pressing the Led on & Led off from mobile
4. My nodeMCU wifi was not showing in wifi settings
Please support me to resolve 🙏
Repeater mobile se program kese kare
Sir wifi not connecting...
Please help sir
Check SSID and password.
showing -1 on serial monitor.i think the board not getting any data from thingspeak
First check nodmcu connected to WiFi or not.
we are sending only 0 and 1 to server from app. If you are getting value 1 then may be it is right.
please send me picture
Hi again, I did everything exactly the same but the comunnication seems very poor, between the app and ThingSpeak. It turns it on at first very well (almost at the same time I push the botton) but then it doesn't turn it off. I don't know why, my internet connection is fine, and app inventor works great comunnicating with other services.
If you could help me, I'll really aprecciated
+Santiago Musante . Wait for at least 10 seconds after pressing ON and OFF switch.
@@EmbeddedGate Is there any method to reduce this delay.?
@@yasindudamith6383 . I'm working on same thing. If I get any positive response I will share with you.
@@EmbeddedGate were you able to find?
@@aarushsood1944 . I didn't get your point.
Its posible to make voice command for this project?
Yes
@@EmbeddedGate can you make tutorial for voice command please.
@@hhstudio8806 I will try to make. Busy with another video.
Hard resetting via RTS pin...
why
it's working when I changed Serial.begin(9600); this. but it's not working on single click. I have to click off button or on button multiple time then it's getting reflected, any idea?
which ESP module you are using?
@@EmbeddedGate 8266, now it's working
Can I control led from anywhere
Yes
yes
not working at all.
How to decrease delay??
Not possible in the free version of thingspeak server.
@@EmbeddedGate Okay, You know which server has little delay besides thingspeak?
@@agustinusyubilium4759 Google Firebase
Send code
Code is available in video description.
How can i contact you please..
This is exactly what I want