Some people mentioned that their lining was "puffy" after sewn in. The speaker mentions that the sewing line type needs to be changed to "Turned" @ 4:10 - this is a property that can be changed to allow a seam to press open or closed, basically will allow that edge to hinge so the lining does not bubble at the edges where lining and bag meet. It is explained thoroughly how to change Sewing Line Type in the tutorial linked below. th-cam.com/video/owWiplmx88w/w-d-xo.html - Timestamp for this part is 16:08
Instead of creating the zipper; I used the Zipper tool. Why is the Zipper tool fails every time I simulate ? No matter what the bag either implode on itself with the lining going out and simulation never stabilizing or go airborne and disappear from the view.
Keep your Particle Distance higher so simulation will run faster. You can leave Strengthen on and keep the stiffness until you are finished. Use Freeze when you need to "anchor" another pattern piece. You can render with Strengthen and Freeze still on.
This has to do with the fabric that you apply. Whichever one you choose, make sure in the Physical Property Preset you choose "Trim Full grain Leather" This will stay stiff when you simulate.
Once you design a bag on the software does the software 'create' the instructions/pattern to make the bag? If not, is there separate software to use for the pattern process?
When you are on the Select/Move tool in the 3D window, hold down the "W" Key and click on an area. This will place a "pin" down. To remove the pin you can right click and choose delete or you can Hold "W" and click back on the pin to remove it.
@@CLO3D ok thank you, I just wondered if anyone else has had the same problem as every other file I can download apart from this - it is all greyed out in Clo set
You are very skilled in modeling, but you are too fast when performing actions with the right mouse button and it's hard to understand what you're doing.
Some people mentioned that their lining was "puffy" after sewn in. The speaker mentions that the sewing line type needs to be changed to "Turned" @ 4:10 - this is a property that can be changed to allow a seam to press open or closed, basically will allow that edge to hinge so the lining does not bubble at the edges where lining and bag meet. It is explained thoroughly how to change Sewing Line Type in the tutorial linked below.
th-cam.com/video/owWiplmx88w/w-d-xo.html - Timestamp for this part is 16:08
Instead of creating the zipper; I used the Zipper tool. Why is the Zipper tool fails every time I simulate ? No matter what the bag either implode on itself with the lining going out and simulation never stabilizing or go airborne and disappear from the view.
Very good example of a different forms with zip, not just boxed item. Thank you!
I cannot sew handles with main fabric's internal line at step at time 2:13, internal lines are not being selected by sewing tool.
If those lines are purple dotted lines, they are Baselines. You need to use the Trace tool and convert them to Internal Lines.
The fabric is falling apart after i stimulate, should i increase the particle distance[ i even strengthen it]. Please help
Sorry for the late reply. Were you able to solve your issue.
I- this is TOO FAST. like what... how do I know when to choose and freeze and strengthen and the particle distance and OMG HOW-
slow down the video youtube has an opption
Keep your Particle Distance higher so simulation will run faster. You can leave Strengthen on and keep the stiffness until you are finished. Use Freeze when you need to "anchor" another pattern piece. You can render with Strengthen and Freeze still on.
Great tutorial. Fellow Marvelous Designer user here.
Glad it was helpful!
Nice vidéo! Thank you! How do I do to make the handle as straight and hard like you? Mine just fall down even after I strengthen them
Did you apply strengthen and fold the Internal Line?
Can it make shoes as well?
Absolutely!
what software are you using sir?
CLO 3D?
Fantastic video! Thank you for sharing!
Glad you enjoyed it!
Can I apply some drawing? In case I wanted some floral broderie in a linen bag, but not like a pattern all over it
Absolutely. Start with this video about Materials. th-cam.com/video/LFtPds-QAWk/w-d-xo.html
How did you get the bag so solid? Mine collapses in on itself
Never mind I didn’t use the right fabric lol
😎
which fabric was it
@@PolishedTruth “Trim - Full Grain Leather”
@@kevintung9152 thank you
Thank you! This was so fun.
you are welcome
This tutorial can be done in marvelous designer too?
This is created specifically for CLO
can you show us how to print the templates in paper so i can make it real?
you can export a PDF from Print Layout Mode. support.clo3d.com/hc/en-us/articles/115000565028--Mode-Print-Layout
How do I make it come true ?
What do you mean?
excuse me how can I make it look straiten? because I follow you but my bag look flat after unstraigten?
This has to do with the fabric that you apply. Whichever one you choose, make sure in the Physical Property Preset you choose "Trim Full grain Leather" This will stay stiff when you simulate.
Once you design a bag on the software does the software 'create' the instructions/pattern to make the bag? If not, is there separate software to use for the pattern process?
If you fully realize the design in CLO and upload to CLO-set it will generate a Tech Pack for you.
how are you "pinning" the handles to stay up??
When you are on the Select/Move tool in the 3D window, hold down the "W" Key and click on an area. This will place a "pin" down. To remove the pin you can right click and choose delete or you can Hold "W" and click back on the pin to remove it.
Thank you for this very informative video!!!
Glad it was helpful!
Whats the name of the software
clo3d.com
How should I add the downloaded swatches to my library?
You can check out the beginning of this video which shows how to add things to your library
th-cam.com/video/zYL3Im5XFHA/w-d-xo.html
Awesome
Interessante , mi piace,Grazie! È stato così divertente
Sìì! Siamo così contenti!
I can not download the files from the link on clo-set - it only allows me to put in favourites not download.
Hi Maggie, you can submit this issue through here: www.clo3d.com/contact
@@CLO3D ok thank you, I just wondered if anyone else has had the same problem as every other file I can download apart from this - it is all greyed out in Clo set
@@maggiemattioni7762 Sorry for the confusion - the link should be accessible now.
@@CLO3D Hi, I can't download it either. It's greyed out.. Could you maybe update with a google drive link like with the beginner's guide?
@@JosineIsEr This link has been updated, please try now.
Thanks for this tutorial! You cool
You're welcome.
Awesome! What program are you using?
Learn more at www.clo3d.com/
If you want, you can go a bit faster. No problem =)
Too fast, I can't see what the menu items you're selecting.
Try adjusting the playback speed of the video.
Good sketch
Thanks
Clo
I love you
I am from Pk nice
LOL. We love all our users!
You are very skilled in modeling, but you are too fast when performing actions with the right mouse button and it's hard to understand what you're doing.
Thank you for your feedback. We will keep it in mind for future videos
thanks.
@@CLO3D
👌🏻👌🏻
😊
Literally so many missed things that she does without an explanation
Hi. This tutorial can be a bit fast, but you can always pause, rewind, rewatch.
:)
The fabric is falling apart after i stimulate, should i increase the particle distance[ i even strengthen it]. Please help
What do you mean by "falling apart"? Is it collapsing to the ground or are the seams splitting?
i want to design shinguard in clo 3d after creating front side, simulation just drop that piece on ground
please also make tutorial on designing shinguard with velcro straps